Merge tag 'u-boot-atmel-fixes-2021.01-b' of https://gitlab.denx.de/u-boot/custodians...

[platform/kernel/u-boot.git] / board / freescale / t102xrdb / eth_t102xrdb.c

diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c
index 2e400c4..56e6109 100644 (file)
--- a/board/freescale/t102xrdb/eth_t102xrdb.c
+++ b/board/freescale/t102xrdb/eth_t102xrdb.c
@@ -1,11 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
  *
- * SPDX-License-Identifier:     GPL-2.0+
+ * Shengzhou Liu <Shengzhou.Liu@freescale.com>
  */
 
 #include <common.h>
 #include <command.h>
+#include <fdt_support.h>
+#include <net.h>
 #include <netdev.h>
 #include <asm/mmu.h>
 #include <asm/processor.h>
@@ -19,10 +22,11 @@
 #include <fsl_mdio.h>
 #include <miiphy.h>
 #include <phy.h>
-#include <asm/fsl_dtsec.h>
+#include <fsl_dtsec.h>
 #include <asm/fsl_serdes.h>
+#include "../common/fman.h"
 
-int board_eth_init(bd_t *bis)
+int board_eth_init(struct bd_info *bis)
 {
 #if defined(CONFIG_FMAN_ENET)
        int i, interface;
@@ -51,15 +55,30 @@ int board_eth_init(bd_t *bis)
        /* Register the 10G MDIO bus */
        fm_memac_mdio_init(bis, &tgec_mdio_info);
 
-       /* Set the two on-board RGMII PHY address */
-       fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR);
+       /* Set the on-board RGMII PHY address */
        fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY1_ADDR);
 
        switch (srds_s1) {
+#ifdef CONFIG_TARGET_T1024RDB
        case 0x95:
-               /* 10G XFI with Aquantia PHY */
+               /* set the on-board RGMII2  PHY */
+               fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR);
+
+               /* set 10G XFI with Aquantia AQR105 PHY */
                fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
                break;
+#endif
+       case 0x6a:
+       case 0x6b:
+       case 0x77:
+       case 0x135:
+               /* set the on-board 2.5G SGMII AQR105 PHY */
+               fm_info_set_phy_address(FM1_DTSEC3, SGMII_AQR_PHY_ADDR);
+#ifdef CONFIG_TARGET_T1023RDB
+               /* set the on-board 1G SGMII RTL8211F PHY */
+               fm_info_set_phy_address(FM1_DTSEC1, SGMII_RTK_PHY_ADDR);
+#endif
+               break;
        default:
                printf("SerDes protocol 0x%x is not supported on T102xRDB\n",
                       srds_s1);
@@ -70,9 +89,24 @@ int board_eth_init(bd_t *bis)
                interface = fm_info_get_enet_if(i);
                switch (interface) {
                case PHY_INTERFACE_MODE_RGMII:
+               case PHY_INTERFACE_MODE_RGMII_TXID:
+               case PHY_INTERFACE_MODE_RGMII_RXID:
+               case PHY_INTERFACE_MODE_RGMII_ID:
                        dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
                        fm_info_set_mdio(i, dev);
                        break;
+               case PHY_INTERFACE_MODE_SGMII:
+#if defined(CONFIG_TARGET_T1023RDB)
+                       dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+#elif defined(CONFIG_TARGET_T1024RDB)
+                       dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
+#endif
+                       fm_info_set_mdio(i, dev);
+                       break;
+               case PHY_INTERFACE_MODE_SGMII_2500:
+                       dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
+                       fm_info_set_mdio(i, dev);
+                       break;
                default:
                        break;
                }
@@ -95,6 +129,21 @@ int board_eth_init(bd_t *bis)
        return pci_eth_init(bis);
 }
 
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+                             enum fm_port port, int offset)
+{
+#if defined(CONFIG_TARGET_T1024RDB)
+       if (((fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII_2500) ||
+            (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII)) &&
+                       (port == FM1_DTSEC3)) {
+               fdt_set_phy_handle(fdt, compat, addr, "sg_2500_aqr105_phy4");
+               fdt_setprop_string(fdt, offset, "phy-connection-type",
+                                  "sgmii-2500");
+               fdt_status_disabled_by_alias(fdt, "xg_aqr105_phy3");
+       }
+#endif
+}
+
 void fdt_fixup_board_enet(void *fdt)
 {
 }