+// SPDX-License-Identifier: GPL-2.0+
/**
* Copyright 2011 Freescale Semiconductor
* Author: Mingkai Hu <Mingkai.hu@freescale.com>
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
* This file provides support for the board-specific CPLD used on some Freescale
* reference boards.
*
* The following macros need to be defined:
*
* CPLD_BASE - The virtual address of the base of the CPLD register map
- *
*/
#include <common.h>
printf("cpld_ver_sub = 0x%02x\n", CPLD_READ(cpld_ver_sub));
printf("pcba_ver = 0x%02x\n", CPLD_READ(pcba_ver));
printf("system_rst = 0x%02x\n", CPLD_READ(system_rst));
- printf("wd_cfg = 0x%02x\n", CPLD_READ(wd_cfg));
printf("sw_ctl_on = 0x%02x\n", CPLD_READ(sw_ctl_on));
printf("por_cfg = 0x%02x\n", CPLD_READ(por_cfg));
printf("switch_strobe = 0x%02x\n", CPLD_READ(switch_strobe));
}
#endif
-int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int cpld_cmd(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[])
{
int rc = 0;
- unsigned int i;
if (argc <= 1)
return cmd_usage(cmdtp);
cpld_set_altbank();
else
cpld_set_defbank();
- } else if (strcmp(argv[1], "watchdog") == 0) {
- static char *period[8] = {"1ms", "10ms", "30ms", "disable",
- "100ms", "1s", "10s", "60s"};
- for (i = 0; i < ARRAY_SIZE(period); i++) {
- if (strcmp(argv[2], period[i]) == 0)
- CPLD_WRITE(wd_cfg, i);
- }
} else if (strcmp(argv[1], "lane_mux") == 0) {
- u32 lane = simple_strtoul(argv[2], NULL, 16);
- u8 val = (u8)simple_strtoul(argv[3], NULL, 16);
+ u32 lane = hextoul(argv[2], NULL);
+ u8 val = (u8)hextoul(argv[3], NULL);
u8 reg = CPLD_READ(serdes_mux);
switch (lane) {
"Reset the board or pin mulexing selection using the CPLD sequencer",
"reset - hard reset to default bank\n"
"cpld_cmd reset altbank - reset to alternate bank\n"
- "cpld_cmd watchdog <watchdog_period> - set the watchdog period\n"
- " period: 1ms 10ms 30ms 100ms 1s 10s 60s disable\n"
"cpld_cmd lane_mux <lane> <mux_value> - set multiplexed lane pin\n"
- " lane 6: 0 -> slot1 (Default)\n"
- " 1 -> SGMII\n"
- " lane a: 0 -> slot2 (Default)\n"
- " 1 -> AURORA\n"
- " lane c: 0 -> slot2 (Default)\n"
- " 1 -> SATA0\n"
- " lane d: 0 -> slot2 (Default)\n"
- " 1 -> SATA1\n"
+ " lane 6: 0 -> slot1\n"
+ " 1 -> SGMII (Default)\n"
+ " lane a: 0 -> slot2\n"
+ " 1 -> AURORA (Default)\n"
+ " lane c: 0 -> slot2\n"
+ " 1 -> SATA0 (Default)\n"
+ " lane d: 0 -> slot2\n"
+ " 1 -> SATA1 (Default)\n"
#ifdef DEBUG
"cpld_cmd dump - display the CPLD registers\n"
#endif