mx6sabresd: Convert ethernet to driver model

[platform/kernel/u-boot.git] / board / freescale / mx6sabresd / mx6sabresd.c

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 4a20827..07d3b0e 100644 (file)
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -21,7 +21,6 @@
 #include <mmc.h>
 #include <fsl_esdhc_imx.h>
 #include <miiphy.h>
-#include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/io.h>
@@ -44,9 +43,6 @@ DECLARE_GLOBAL_DATA_PTR;
        PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm |                 \
        PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 
-#define ENET_PAD_CTRL  (PAD_CTL_PUS_100K_UP |                  \
-       PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
-
 #define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
                      PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
 
@@ -73,31 +69,6 @@ static iomux_v3_cfg_t const uart1_pads[] = {
        IOMUX_PADS(PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
 };
 
-static iomux_v3_cfg_t const enet_pads[] = {
-       IOMUX_PADS(PAD_ENET_MDIO__ENET_MDIO     | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_ENET_MDC__ENET_MDC       | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_TXC__RGMII_TXC     | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_TD0__RGMII_TD0     | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_TD1__RGMII_TD1     | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_TD2__RGMII_TD2     | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_TD3__RGMII_TD3     | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_TX_CTL__RGMII_TX_CTL       | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_ENET_REF_CLK__ENET_TX_CLK        | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_RXC__RGMII_RXC     | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_RD0__RGMII_RD0     | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_RD1__RGMII_RD1     | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_RD2__RGMII_RD2     | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_RD3__RGMII_RD3     | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       IOMUX_PADS(PAD_RGMII_RX_CTL__RGMII_RX_CTL       | MUX_PAD_CTRL(ENET_PAD_CTRL)),
-       /* AR8031 PHY Reset */
-       IOMUX_PADS(PAD_ENET_CRS_DV__GPIO1_IO25  | MUX_PAD_CTRL(NO_PAD_CTRL)),
-};
-
-static void setup_iomux_enet(void)
-{
-       SETUP_IOMUX_PADS(enet_pads);
-}
-
 static iomux_v3_cfg_t const usdhc2_pads[] = {
        IOMUX_PADS(PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
        IOMUX_PADS(PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
@@ -495,13 +466,6 @@ int overwrite_console(void)
        return 1;
 }
 
-int board_eth_init(bd_t *bis)
-{
-       setup_iomux_enet();
-
-       return cpu_eth_init(bis);
-}
-
 #ifdef CONFIG_USB_EHCI_MX6
 static void setup_usb(void)
 {