*
* (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
*
- * SPDX-License-Identifier: GPL-2.0+
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
*/
#include <common.h>
#include <netdev.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/imx-regs.h>
-#include <asm/arch/sys_proto.h>
-#include <watchdog.h>
-#include <power/pmic.h>
-#include <fsl_pmic.h>
-#include <errno.h>
+#include <asm/arch/mx31.h>
+#include <asm/arch/mx31-regs.h>
DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_SPL_BUILD
-void board_init_f(ulong bootflag)
-{
- /*
- * copy ourselves from where we are running to where we were
- * linked at. Use ulong pointers as all addresses involved
- * are 4-byte-aligned.
- */
- ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst;
- asm volatile ("ldr %0, =_start" : "=r"(start_ptr));
- asm volatile ("ldr %0, =_end" : "=r"(end_ptr));
- asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr));
- asm volatile ("adr %0, board_init_f" : "=r"(run_ptr));
- for (dst = start_ptr; dst < end_ptr; dst++)
- *dst = *(dst+(run_ptr-link_ptr));
- /*
- * branch to nand_boot's link-time address.
- */
- asm volatile("ldr pc, =nand_boot");
-}
-#endif
-
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
return 0;
}
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+}
+
int board_early_init_f(void)
{
/* CS5: CPLD incl. network controller */
- static const struct mxc_weimcs cs5 = {
- /* sp wp bcd bcs psz pme sync dol cnc wsc ew wws edc */
- CSCR_U(0, 0, 0, 0, 0, 0, 0, 0, 3, 24, 0, 4, 3),
- /* oea oen ebwa ebwn csa ebc dsz csn psr cre wrap csen */
- CSCR_L(2, 2, 2, 5, 2, 0, 5, 2, 0, 0, 0, 1),
- /* ebra ebrn rwa rwn mum lah lbn lba dww dct wwu age cnc2 fce*/
- CSCR_A(2, 2, 2, 2, 0, 0, 2, 2, 0, 0, 0, 0, 0, 0)
- };
-
- mxc_setup_weimcs(5, &cs5);
+ __REG(CSCR_U(5)) = 0x0000d843;
+ __REG(CSCR_L(5)) = 0x22252521;
+ __REG(CSCR_A(5)) = 0x22220a00;
/* Setup UART1 and SPI2 pins */
mx31_uart1_hw_init();
int board_init(void)
{
+ gd->bd->bi_arch_number = MACH_TYPE_MX31_3DS; /* board id for linux */
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
-int board_late_init(void)
-{
- u32 val;
- struct pmic *p;
- int ret;
-
- ret = pmic_init(CONFIG_FSL_PMIC_BUS);
- if (ret)
- return ret;
-
- p = pmic_get("FSL_PMIC");
- if (!p)
- return -ENODEV;
- /* Enable RTC battery */
- pmic_reg_read(p, REG_POWER_CTL0, &val);
- pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
- pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI);
-#ifdef CONFIG_HW_WATCHDOG
- hw_watchdog_init();
-#endif
- return 0;
-}
-
int checkboard(void)
{
- printf("Board: MX31PDK\n");
+ printf("Board: i.MX31 MAX PDK (3DS)\n");
return 0;
}