#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_86xx.h>
-#include <asm/immap_fsl_pci.h>
+#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/io.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <netdev.h>
-#include "../common/pixis.h"
-
-long int fixed_sdram(void);
+phys_size_t fixed_sdram(void);
int board_early_init_f(void)
{
int checkboard(void)
{
- printf ("Board: MPC8641HPCN, System ID: 0x%02x, "
- "System Version: 0x%02x, FPGA Version: 0x%02x\n",
- in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
- in8(PIXIS_BASE + PIXIS_PVER));
+ u8 vboot;
+ u8 *pixis_base = (u8 *)PIXIS_BASE;
+
+ printf ("Board: MPC8641HPCN, Sys ID: 0x%02x, "
+ "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+ in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
+ in_8(pixis_base + PIXIS_PVER));
+
+ vboot = in_8(pixis_base + PIXIS_VBOOT);
+ if (vboot & PIXIS_VBOOT_FMAP)
+ printf ("vBank: %d\n", ((vboot & PIXIS_VBOOT_FBANK) >> 6));
+ else
+ puts ("Promjet\n");
+
+#ifdef CONFIG_PHYS_64BIT
+ printf (" 36-bit physical address map\n");
+#endif
return 0;
}
phys_size_t
initdram(int board_type)
{
- long dram_size = 0;
+ phys_size_t dram_size = 0;
#if defined(CONFIG_SPD_EEPROM)
dram_size = fsl_ddr_sdram();
dram_size = fixed_sdram();
#endif
-#if defined(CONFIG_SYS_RAMBOOT)
- puts(" DDR: ");
- return dram_size;
-#endif
+ setup_ddr_bat(dram_size);
puts(" DDR: ");
return dram_size;
/*
* Fixed sdram init -- doesn't use serial presence detect.
*/
-long int
+phys_size_t
fixed_sdram(void)
{
#if !defined(CONFIG_SYS_RAMBOOT)
ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
- ddr->sdram_mode_1 = CONFIG_SYS_DDR_MODE_1;
+ ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
#if defined (CONFIG_DDR_ECC)
/* Enable ECC checking */
- ddr->sdram_cfg_1 = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
+ ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
#else
- ddr->sdram_cfg_1 = CONFIG_SYS_DDR_CONTROL;
+ ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
#endif
asm("sync; isync");
#if defined(CONFIG_PCI)
-/*
- * Initialize PCI Devices, report devices found.
- */
-
-#ifndef CONFIG_PCI_PNP
-static struct pci_config_table pci_fsl86xxads_config_table[] = {
- {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_IDSEL_NUMBER, PCI_ANY_ID,
- pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
- PCI_ENET0_MEMADDR,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}},
- {}
-};
-#endif
-
-
-static struct pci_controller pci1_hose = {
-#ifndef CONFIG_PCI_PNP
- config_table:pci_mpc86xxcts_config_table
-#endif
-};
+static struct pci_controller pci1_hose;
#endif /* CONFIG_PCI */
#ifdef CONFIG_PCI2
int first_free_busno = 0;
-extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
-extern void fsl_pci_init(struct pci_controller *hose);
-
void pci_init_board(void)
{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
- >> MPC8641_PORDEVSR_IO_SEL_SHIFT;
-
#ifdef CONFIG_PCI1
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
struct pci_controller *hose = &pci1_hose;
struct pci_region *r = hose->regions;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ uint devdisr = gur->devdisr;
+ uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
+ >> MPC8641_PORDEVSR_IO_SEL_SHIFT;
+ int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
#ifdef DEBUG
uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
>> MPC8641_PORBMSR_HA_SHIFT;
uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
#endif
- if ((io_sel == 2 || io_sel == 3 || io_sel == 5
- || io_sel == 6 || io_sel == 7 || io_sel == 0xF)
- && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
+ if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det);
if (pci->pme_msg_det) {
}
debug("\n");
- /* inbound */
- r += fsl_pci_setup_inbound_windows(r);
-
/* outbound memory */
pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BASE,
+ CONFIG_SYS_PCI1_MEM_BUS,
CONFIG_SYS_PCI1_MEM_PHYS,
CONFIG_SYS_PCI1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BASE,
+ CONFIG_SYS_PCI1_IO_BUS,
CONFIG_SYS_PCI1_IO_PHYS,
CONFIG_SYS_PCI1_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
- pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
- fsl_pci_init(hose);
+ fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
first_free_busno=hose->last_busno+1;
printf (" PCI-EXPRESS 1 on bus %02x - %02x\n",
* Activate ULI1575 legacy chip by performing a fake
* memory access. Needed to make ULI RTC work.
*/
- in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_BASE
+ in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_VIRT
+ CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000)));
} else {
struct pci_controller *hose = &pci2_hose;
struct pci_region *r = hose->regions;
- /* inbound */
- r += fsl_pci_setup_inbound_windows(r);
-
/* outbound memory */
pci_set_region(r++,
- CONFIG_SYS_PCI2_MEM_BASE,
+ CONFIG_SYS_PCI2_MEM_BUS,
CONFIG_SYS_PCI2_MEM_PHYS,
CONFIG_SYS_PCI2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
pci_set_region(r++,
- CONFIG_SYS_PCI2_IO_BASE,
+ CONFIG_SYS_PCI2_IO_BUS,
CONFIG_SYS_PCI2_IO_PHYS,
CONFIG_SYS_PCI2_IO_SIZE,
PCI_REGION_IO);
hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
- pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
- fsl_pci_init(hose);
+ fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
first_free_busno=hose->last_busno+1;
printf (" PCI-EXPRESS 2 on bus %02x - %02x\n",
#if defined(CONFIG_OF_BOARD_SETUP)
-extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
- struct pci_controller *hose);
-
void
ft_board_setup(void *blob, bd_t *bd)
{
+ int off;
+ u64 *tmp;
+ u32 *addrcells;
+
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI1
#ifdef CONFIG_PCI2
ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
#endif
+
+ /*
+ * Warn if it looks like the device tree doesn't match u-boot.
+ * This is just an estimation, based on the location of CCSR,
+ * which is defined by the "reg" property in the soc node.
+ */
+ off = fdt_path_offset(blob, "/soc8641");
+ addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL);
+ tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL);
+
+ if (tmp) {
+ u64 addr;
+ if (addrcells && (*addrcells == 1))
+ addr = *(u32 *)tmp;
+ else
+ addr = *tmp;
+
+ if (addr != CONFIG_SYS_CCSRBAR_PHYS)
+ printf("WARNING: The CCSRBAR address in your .dts "
+ "does not match the address of the CCSR "
+ "in u-boot. This means your .dts might "
+ "be old.\n");
+ }
}
#endif
{
u8 i, go_bit, rd_clks;
ulong val = 0;
+ u8 *pixis_base = (u8 *)PIXIS_BASE;
- go_bit = in8(PIXIS_BASE + PIXIS_VCTL);
+ go_bit = in_8(pixis_base + PIXIS_VCTL);
go_bit &= 0x01;
- rd_clks = in8(PIXIS_BASE + PIXIS_VCFGEN0);
+ rd_clks = in_8(pixis_base + PIXIS_VCFGEN0);
rd_clks &= 0x1C;
/*
if (go_bit) {
if (rd_clks == 0x1c)
- i = in8(PIXIS_BASE + PIXIS_AUX);
+ i = in_8(pixis_base + PIXIS_AUX);
else
- i = in8(PIXIS_BASE + PIXIS_SPD);
+ i = in_8(pixis_base + PIXIS_SPD);
} else {
- i = in8(PIXIS_BASE + PIXIS_SPD);
+ i = in_8(pixis_base + PIXIS_SPD);
}
i &= 0x07;
cpu_eth_init(bis);
return pci_eth_init(bis);
}
+
+void board_reset(void)
+{
+ u8 *pixis_base = (u8 *)PIXIS_BASE;
+
+ out_8(pixis_base + PIXIS_RST, 0);
+
+ while (1)
+ ;
+}
+
+#ifdef CONFIG_MP
+extern void cpu_mp_lmb_reserve(struct lmb *lmb);
+
+void board_lmb_reserve(struct lmb *lmb)
+{
+ cpu_mp_lmb_reserve(lmb);
+}
+#endif