Merge branch 'master' of git://git.denx.de/u-boot-arm

[platform/kernel/u-boot.git] / board / freescale / mpc8610hpcd / mpc8610hpcd.c

diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd.c b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
index 1a6f8b4..2ac169b 100644 (file)
--- a/board/freescale/mpc8610hpcd/mpc8610hpcd.c
+++ b/board/freescale/mpc8610hpcd/mpc8610hpcd.c
@@ -55,16 +55,17 @@ int board_early_init_f(void)
 int misc_init_r(void)
 {
        u8 tmp_val, version;
+       u8 *pixis_base = (u8 *)PIXIS_BASE;
 
        /*Do not use 8259PIC*/
-       tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
-       out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x80);
+       tmp_val = in_8(pixis_base + PIXIS_BRDCFG0);
+       out_8(pixis_base + PIXIS_BRDCFG0, tmp_val | 0x80);
 
        /*For FPGA V7 or higher, set the IRQMAPSEL to 0 to use MAP0 interrupt*/
-       version = in8(PIXIS_BASE + PIXIS_PVER);
+       version = in_8(pixis_base + PIXIS_PVER);
        if(version >= 0x07) {
-               tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
-               out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val & 0xbf);
+               tmp_val = in_8(pixis_base + PIXIS_BRDCFG0);
+               out_8(pixis_base + PIXIS_BRDCFG0, tmp_val & 0xbf);
        }
 
        /* Using this for DIU init before the driver in linux takes over
@@ -96,11 +97,12 @@ int checkboard(void)
 {
        volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
        volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+       u8 *pixis_base = (u8 *)PIXIS_BASE;
 
        printf ("Board: MPC8610HPCD, System ID: 0x%02x, "
                "System Version: 0x%02x, FPGA Version: 0x%02x\n",
-               in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
-               in8(PIXIS_BASE + PIXIS_PVER));
+               in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
+               in_8(pixis_base + PIXIS_PVER));
 
        mcm->abcr |= 0x00010000; /* 0 */
        mcm->hpmr3 = 0x80000008; /* 4c */
@@ -154,7 +156,7 @@ phys_size_t fixed_sdram(void)
        ddr->timing_cfg_0 = 0x00260802;
        ddr->timing_cfg_1 = 0x3935d322;
        ddr->timing_cfg_2 = 0x14904cc8;
-       ddr->sdram_mode_1 = 0x00480432;
+       ddr->sdram_mode = 0x00480432;
        ddr->sdram_mode_2 = 0x00000000;
        ddr->sdram_interval = 0x06180fff; /* 0x06180100; */
        ddr->sdram_data_init = 0xDEADBEEF;
@@ -170,7 +172,7 @@ phys_size_t fixed_sdram(void)
 
        udelay(500);
 
-       ddr->sdram_cfg_1 = 0xc3000000; /* 0xe3008000;*/
+       ddr->sdram_cfg = 0xc3000000; /* 0xe3008000;*/
 
 
 #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
@@ -229,9 +231,6 @@ static struct pci_controller pcie2_hose;
 
 int first_free_busno = 0;
 
-extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
-extern void fsl_pci_init(struct pci_controller *hose);
-
 void pci_init_board(void)
 {
        volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
@@ -402,9 +401,6 @@ void pci_init_board(void)
 }
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
-                       struct pci_controller *hose);
-
 void
 ft_board_setup(void *blob, bd_t *bd)
 {
@@ -444,10 +440,9 @@ get_board_sys_clk(ulong dummy)
 {
        u8 i;
        ulong val = 0;
-       ulong a;
+       u8 *pixis_base = (u8 *)PIXIS_BASE;
 
-       a = PIXIS_BASE + PIXIS_SPD;
-       i = in8(a);
+       i = in_8(pixis_base + PIXIS_SPD);
        i &= 0x07;
 
        switch (i) {
@@ -487,7 +482,9 @@ int board_eth_init(bd_t *bis)
 
 void board_reset(void)
 {
-       out8(PIXIS_BASE + PIXIS_RST, 0);
+       u8 *pixis_base = (u8 *)PIXIS_BASE;
+
+       out_8(pixis_base + PIXIS_RST, 0);
 
        while (1)
                ;