/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007-2011 Freescale Semiconductor, Inc.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/io.h>
+#include <asm/fsl_serdes.h>
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <tsec.h>
+#include <fsl_mdio.h>
#include <netdev.h>
-#include "../common/pixis.h"
#include "../common/sgmii_riser.h"
-long int fixed_sdram(void);
-
int checkboard (void)
{
u8 vboot;
u8 *pixis_base = (u8 *)PIXIS_BASE;
- puts ("Board: MPC8572DS ");
-#ifdef CONFIG_PHYS_64BIT
- puts ("(36-bit addrmap) ");
-#endif
- printf ("Sys ID: 0x%02x, "
+ printf("Board: MPC8572DS Sys ID: 0x%02x, "
"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
in_8(pixis_base + PIXIS_PVER));
return 0;
}
-phys_size_t initdram(int board_type)
-{
- phys_size_t dram_size = 0;
-
- puts("Initializing....");
-
-#ifdef CONFIG_SPD_EEPROM
- dram_size = fsl_ddr_sdram();
-#else
- dram_size = fixed_sdram();
-#endif
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- puts(" DDR: ");
- return dram_size;
-}
#if !defined(CONFIG_SPD_EEPROM)
/*
#endif
-#ifdef CONFIG_PCIE1
-static struct pci_controller pcie1_hose;
-#endif
-
-#ifdef CONFIG_PCIE2
-static struct pci_controller pcie2_hose;
-#endif
-
-#ifdef CONFIG_PCIE3
-static struct pci_controller pcie3_hose;
-#endif
-
#ifdef CONFIG_PCI
void pci_init_board(void)
{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- struct fsl_pci_info pci_info[3];
- u32 devdisr, pordevsr, io_sel, temp32;
- int first_free_busno = 0;
- int num = 0;
+ struct pci_controller *hose;
+
+ fsl_pcie_init_board(0);
+
+ hose = find_hose_by_cfg_addr((void *)(CONFIG_SYS_PCIE3_ADDR));
+
+ if (hose) {
+ u32 temp32;
+ u8 uli_busno = hose->first_busno + 2;
- int pcie_ep, pcie_configured;
-
- devdisr = in_be32(&gur->devdisr);
- pordevsr = in_be32(&gur->pordevsr);
- io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
-
- debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
-
- if (!(pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
- printf (" eTSEC1 is in sgmii mode.\n");
- if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
- printf (" eTSEC2 is in sgmii mode.\n");
- if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
- printf (" eTSEC3 is in sgmii mode.\n");
- if (!(pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
- printf (" eTSEC4 is in sgmii mode.\n");
-
- puts("\n");
-#ifdef CONFIG_PCIE3
- pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
- SET_STD_PCIE_INFO(pci_info[num], 3);
- pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
- printf (" PCIE3 connected to ULI as %s (base addr %lx)\n",
- pcie_ep ? "End Point" : "Root Complex",
- pci_info[num].regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
- &pcie3_hose, first_free_busno);
/*
* Activate ULI1575 legacy chip by performing a fake
* memory access. Needed to make ULI RTC work.
* Device 1d has the first on-board memory BAR.
*/
- pci_hose_read_config_dword(&pcie3_hose, PCI_BDF(2, 0x1d, 0),
+ pci_hose_read_config_dword(hose, PCI_BDF(uli_busno, 0x1d, 0),
PCI_BASE_ADDRESS_1, &temp32);
+
if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) {
- void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0),
+ void *p = pci_mem_to_virt(PCI_BDF(uli_busno, 0x1d, 0),
temp32, 4, 0);
debug(" uli1572 read to %p\n", p);
in_be32(p);
}
- } else {
- printf (" PCIE3: disabled\n");
}
- puts("\n");
-#else
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
-#endif
-
-#ifdef CONFIG_PCIE2
- pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
- SET_STD_PCIE_INFO(pci_info[num], 2);
- pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf (" PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
- pcie_ep ? "End Point" : "Root Complex",
- pci_info[num].regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
- &pcie2_hose, first_free_busno);
- } else {
- printf (" PCIE2: disabled\n");
- }
-
- puts("\n");
-#else
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
-#endif
-
-#ifdef CONFIG_PCIE1
- pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- SET_STD_PCIE_INFO(pci_info[num], 1);
- pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf (" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
- pcie_ep ? "End Point" : "Root Complex",
- pci_info[num].regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
- &pcie1_hose, first_free_busno);
- } else {
- printf (" PCIE1: disabled\n");
- }
-
- puts("\n");
-#else
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
-#endif
}
#endif
return 0;
}
-#ifdef CONFIG_GET_CLK_FROM_ICS307
-/* decode S[0-2] to Output Divider (OD) */
-static unsigned char ics307_S_to_OD[] = {
- 10, 2, 8, 4, 5, 7, 3, 6
-};
-
-/* Calculate frequency being generated by ICS307-02 clock chip based upon
- * the control bytes being programmed into it. */
-/* XXX: This function should probably go into a common library */
-static unsigned long
-ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2)
-{
- const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ;
- unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
- unsigned long RDW = cw2 & 0x7F;
- unsigned long OD = ics307_S_to_OD[cw0 & 0x7];
- unsigned long freq;
-
- /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */
-
- /* cw0: C1 C0 TTL F1 F0 S2 S1 S0
- * cw1: V8 V7 V6 V5 V4 V3 V2 V1
- * cw2: V0 R6 R5 R4 R3 R2 R1 R0
- *
- * R6:R0 = Reference Divider Word (RDW)
- * V8:V0 = VCO Divider Word (VDW)
- * S2:S0 = Output Divider Select (OD)
- * F1:F0 = Function of CLK2 Output
- * TTL = duty cycle
- * C1:C0 = internal load capacitance for cyrstal
- */
-
- /* Adding 1 to get a "nicely" rounded number, but this needs
- * more tweaking to get a "properly" rounded number. */
-
- freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD));
-
- debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2,
- freq);
- return freq;
-}
-
-unsigned long get_board_sys_clk(ulong dummy)
-{
- u8 *pixis_base = (u8 *)PIXIS_BASE;
-
- return ics307_clk_freq (
- in_8(pixis_base + PIXIS_VSYSCLK0),
- in_8(pixis_base + PIXIS_VSYSCLK1),
- in_8(pixis_base + PIXIS_VSYSCLK2)
- );
-}
-
-unsigned long get_board_ddr_clk(ulong dummy)
-{
- u8 *pixis_base = (u8 *)PIXIS_BASE;
-
- return ics307_clk_freq (
- in_8(pixis_base + PIXIS_VDDRCLK0),
- in_8(pixis_base + PIXIS_VDDRCLK1),
- in_8(pixis_base + PIXIS_VDDRCLK2)
- );
-}
-#else
-unsigned long get_board_sys_clk(ulong dummy)
-{
- u8 i;
- ulong val = 0;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
-
- i = in_8(pixis_base + PIXIS_SPD);
- i &= 0x07;
-
- switch (i) {
- case 0:
- val = 33333333;
- break;
- case 1:
- val = 40000000;
- break;
- case 2:
- val = 50000000;
- break;
- case 3:
- val = 66666666;
- break;
- case 4:
- val = 83333333;
- break;
- case 5:
- val = 100000000;
- break;
- case 6:
- val = 133333333;
- break;
- case 7:
- val = 166666666;
- break;
- }
-
- return val;
-}
-
-unsigned long get_board_ddr_clk(ulong dummy)
-{
- u8 i;
- ulong val = 0;
- u8 *pixis_base = (u8 *)PIXIS_BASE;
-
- i = in_8(pixis_base + PIXIS_SPD);
- i &= 0x38;
- i >>= 3;
-
- switch (i) {
- case 0:
- val = 33333333;
- break;
- case 1:
- val = 40000000;
- break;
- case 2:
- val = 50000000;
- break;
- case 3:
- val = 66666666;
- break;
- case 4:
- val = 83333333;
- break;
- case 5:
- val = 100000000;
- break;
- case 6:
- val = 133333333;
- break;
- case 7:
- val = 166666666;
- break;
- }
- return val;
-}
-#endif
-
#ifdef CONFIG_TSEC_ENET
int board_eth_init(bd_t *bis)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
int num = 0;
#ifdef CONFIG_TSEC1
SET_STD_TSEC_INFO(tsec_info[num], 1);
- if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+ if (is_serdes_configured(SGMII_TSEC1)) {
+ puts("eTSEC1 is in sgmii mode.\n");
tsec_info[num].flags |= TSEC_SGMII;
+ }
num++;
#endif
#ifdef CONFIG_TSEC2
SET_STD_TSEC_INFO(tsec_info[num], 2);
- if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
+ if (is_serdes_configured(SGMII_TSEC2)) {
+ puts("eTSEC2 is in sgmii mode.\n");
tsec_info[num].flags |= TSEC_SGMII;
+ }
num++;
#endif
#ifdef CONFIG_TSEC3
SET_STD_TSEC_INFO(tsec_info[num], 3);
- if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+ if (is_serdes_configured(SGMII_TSEC3)) {
+ puts("eTSEC3 is in sgmii mode.\n");
tsec_info[num].flags |= TSEC_SGMII;
+ }
num++;
#endif
#ifdef CONFIG_TSEC4
SET_STD_TSEC_INFO(tsec_info[num], 4);
- if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
+ if (is_serdes_configured(SGMII_TSEC4)) {
+ puts("eTSEC4 is in sgmii mode.\n");
tsec_info[num].flags |= TSEC_SGMII;
+ }
num++;
#endif
fsl_sgmii_riser_init(tsec_info, num);
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
fdt_fixup_memory(blob, (u64)base, (u64)size);
-#ifdef CONFIG_PCIE3
- ft_fsl_pci_setup(blob, "pci0", &pcie3_hose);
-#endif
-#ifdef CONFIG_PCIE2
- ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
-#endif
-#ifdef CONFIG_PCIE1
- ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
-#endif
+ FT_FSL_PCI_SETUP;
+
#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_fdt_fixup(blob);
#endif
}
#endif
-
-#ifdef CONFIG_MP
-extern void cpu_mp_lmb_reserve(struct lmb *lmb);
-
-void board_lmb_reserve(struct lmb *lmb)
-{
- cpu_mp_lmb_reserve(lmb);
-}
-#endif