/*
- * Copyright 2007-2008 Freescale Semiconductor, Inc.
+ * Copyright 2007-2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
#include <asm/mmu.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
-#include <asm/immap_fsl_pci.h>
+#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/io.h>
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <tsec.h>
+#include <netdev.h>
-#include "../common/pixis.h"
#include "../common/sgmii_riser.h"
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
long int fixed_sdram(void);
int checkboard (void)
{
- printf ("Board: MPC8572DS, System ID: 0x%02x, "
- "System Version: 0x%02x, FPGA Version: 0x%02x\n",
- in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
- in8(PIXIS_BASE + PIXIS_PVER));
+ u8 vboot;
+ u8 *pixis_base = (u8 *)PIXIS_BASE;
+
+ puts ("Board: MPC8572DS ");
+#ifdef CONFIG_PHYS_64BIT
+ puts ("(36-bit addrmap) ");
+#endif
+ printf ("Sys ID: 0x%02x, "
+ "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+ in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
+ in_8(pixis_base + PIXIS_PVER));
+
+ vboot = in_8(pixis_base + PIXIS_VBOOT);
+ switch ((vboot & PIXIS_VBOOT_LBMAP) >> 6) {
+ case PIXIS_VBOOT_LBMAP_NOR0:
+ puts ("vBank: 0\n");
+ break;
+ case PIXIS_VBOOT_LBMAP_PJET:
+ puts ("Promjet\n");
+ break;
+ case PIXIS_VBOOT_LBMAP_NAND:
+ puts ("NAND\n");
+ break;
+ case PIXIS_VBOOT_LBMAP_NOR1:
+ puts ("vBank: 1\n");
+ break;
+ }
+
return 0;
}
#ifdef CONFIG_SPD_EEPROM
dram_size = fsl_ddr_sdram();
-
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
- dram_size *= 0x100000;
#else
dram_size = fixed_sdram();
#endif
+ dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+ dram_size *= 0x100000;
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /*
- * Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(dram_size);
-#endif
puts(" DDR: ");
return dram_size;
}
static struct pci_controller pcie3_hose;
#endif
-extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
-extern void fsl_pci_init(struct pci_controller *hose);
-
-int first_free_busno=0;
#ifdef CONFIG_PCI
void pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+ struct fsl_pci_info pci_info[3];
+ u32 devdisr, pordevsr, io_sel, temp32;
+ int first_free_busno = 0;
+ int num = 0;
- debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
- devdisr, io_sel, host_agent);
+ int pcie_ep, pcie_configured;
- if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+ devdisr = in_be32(&gur->devdisr);
+ pordevsr = in_be32(&gur->pordevsr);
+ io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+
+ debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
+
+ if (!(pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
printf (" eTSEC1 is in sgmii mode.\n");
- if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
+ if (!(pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
printf (" eTSEC2 is in sgmii mode.\n");
- if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+ if (!(pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
printf (" eTSEC3 is in sgmii mode.\n");
- if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
+ if (!(pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
printf (" eTSEC4 is in sgmii mode.\n");
-
+ puts("\n");
#ifdef CONFIG_PCIE3
- {
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
- struct pci_controller *hose = &pcie3_hose;
- int pcie_ep = (host_agent == 0) || (host_agent == 3) ||
- (host_agent == 5) || (host_agent == 6);
- int pcie_configured = io_sel >= 1;
- struct pci_region *r = hose->regions;
- u32 temp32;
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE3 connected to ULI as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
- /* inbound */
- r += fsl_pci_setup_inbound_windows(r);
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_MEM_BASE,
- CONFIG_SYS_PCIE3_MEM_PHYS,
- CONFIG_SYS_PCIE3_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE3_IO_BASE,
- CONFIG_SYS_PCIE3_IO_PHYS,
- CONFIG_SYS_PCIE3_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
- pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
-
- fsl_pci_init(hose);
-
- first_free_busno=hose->last_busno+1;
- printf (" PCIE3 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
-
- /*
- * Activate ULI1575 legacy chip by performing a fake
- * memory access. Needed to make ULI RTC work.
- * Device 1d has the first on-board memory BAR.
- */
-
- pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ),
- PCI_BASE_ADDRESS_1, &temp32);
- if (temp32 >= CONFIG_SYS_PCIE3_MEM_PHYS) {
- debug(" uli1572 read to %x\n", temp32);
- in_be32((unsigned *)temp32);
- }
- } else {
- printf (" PCIE3: disabled\n");
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)){
+ SET_STD_PCIE_INFO(pci_info[num], 3);
+ pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
+ printf (" PCIE3 connected to ULI as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie3_hose, first_free_busno);
+ /*
+ * Activate ULI1575 legacy chip by performing a fake
+ * memory access. Needed to make ULI RTC work.
+ * Device 1d has the first on-board memory BAR.
+ */
+ pci_hose_read_config_dword(&pcie3_hose, PCI_BDF(2, 0x1d, 0),
+ PCI_BASE_ADDRESS_1, &temp32);
+ if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) {
+ void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0),
+ temp32, 4, 0);
+ debug(" uli1572 read to %p\n", p);
+ in_be32(p);
}
-
+ } else {
+ printf (" PCIE3: disabled\n");
}
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
#endif
#ifdef CONFIG_PCIE2
- {
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
- struct pci_controller *hose = &pcie2_hose;
- int pcie_ep = (host_agent == 2) || (host_agent == 4) ||
- (host_agent == 6) || (host_agent == 0);
- int pcie_configured = io_sel & 4;
- struct pci_region *r = hose->regions;
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
- /* inbound */
- r += fsl_pci_setup_inbound_windows(r);
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_MEM_BASE,
- CONFIG_SYS_PCIE2_MEM_PHYS,
- CONFIG_SYS_PCIE2_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE2_IO_BASE,
- CONFIG_SYS_PCIE2_IO_PHYS,
- CONFIG_SYS_PCIE2_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
- pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
-
- fsl_pci_init(hose);
- first_free_busno=hose->last_busno+1;
- printf (" PCIE2 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
-
- } else {
- printf (" PCIE2: disabled\n");
- }
-
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)){
+ SET_STD_PCIE_INFO(pci_info[num], 2);
+ pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
+ printf (" PCIE2 connected to Slot 1 as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie2_hose, first_free_busno);
+ } else {
+ printf (" PCIE2: disabled\n");
}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
#endif
-#ifdef CONFIG_PCIE1
- {
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
- struct pci_controller *hose = &pcie1_hose;
- int pcie_ep = (host_agent <= 1) || (host_agent == 4) ||
- (host_agent == 5);
- int pcie_configured = io_sel & 6;
- struct pci_region *r = hose->regions;
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
-
- /* inbound */
- r += fsl_pci_setup_inbound_windows(r);
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_MEM_BASE,
- CONFIG_SYS_PCIE1_MEM_PHYS,
- CONFIG_SYS_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCIE1_IO_BASE,
- CONFIG_SYS_PCIE1_IO_PHYS,
- CONFIG_SYS_PCIE1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
- hose->first_busno=first_free_busno;
-
- pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
-
- fsl_pci_init(hose);
-
- first_free_busno=hose->last_busno+1;
- printf(" PCIE1 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
-
- } else {
- printf (" PCIE1: disabled\n");
- }
+#ifdef CONFIG_PCIE1
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+ printf (" PCIE1 connected to Slot 2 as %s (base addr %lx)\n",
+ pcie_ep ? "Endpoint" : "Root Complex",
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
+ } else {
+ printf (" PCIE1: disabled\n");
}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
#endif
}
#endif
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
- const u8 flash_esel = 2;
+ const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
/*
* Remap Boot flash + PROMJET region to caching-inhibited
/* invalidate existing TLB entry for flash + promjet */
disable_tlb(flash_esel);
- set_tlb(1, flashbase, flashbase, /* tlb, epn, rpn */
+ set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
unsigned long get_board_sys_clk(ulong dummy)
{
+ u8 *pixis_base = (u8 *)PIXIS_BASE;
+
return ics307_clk_freq (
- in8(PIXIS_BASE + PIXIS_VSYSCLK0),
- in8(PIXIS_BASE + PIXIS_VSYSCLK1),
- in8(PIXIS_BASE + PIXIS_VSYSCLK2)
+ in_8(pixis_base + PIXIS_VSYSCLK0),
+ in_8(pixis_base + PIXIS_VSYSCLK1),
+ in_8(pixis_base + PIXIS_VSYSCLK2)
);
}
unsigned long get_board_ddr_clk(ulong dummy)
{
+ u8 *pixis_base = (u8 *)PIXIS_BASE;
+
return ics307_clk_freq (
- in8(PIXIS_BASE + PIXIS_VDDRCLK0),
- in8(PIXIS_BASE + PIXIS_VDDRCLK1),
- in8(PIXIS_BASE + PIXIS_VDDRCLK2)
+ in_8(pixis_base + PIXIS_VDDRCLK0),
+ in_8(pixis_base + PIXIS_VDDRCLK1),
+ in_8(pixis_base + PIXIS_VDDRCLK2)
);
}
#else
{
u8 i;
ulong val = 0;
+ u8 *pixis_base = (u8 *)PIXIS_BASE;
- i = in8(PIXIS_BASE + PIXIS_SPD);
+ i = in_8(pixis_base + PIXIS_SPD);
i &= 0x07;
switch (i) {
{
u8 i;
ulong val = 0;
+ u8 *pixis_base = (u8 *)PIXIS_BASE;
- i = in8(PIXIS_BASE + PIXIS_SPD);
+ i = in_8(pixis_base + PIXIS_SPD);
i &= 0x38;
i >>= 3;
return 0;
}
+#ifdef CONFIG_FSL_SGMII_RISER
fsl_sgmii_riser_init(tsec_info, num);
+#endif
tsec_eth_init(bis, tsec_info, num);
- return 0;
+ return pci_eth_init(bis);
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
-extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
- struct pci_controller *hose);
-
void ft_board_setup(void *blob, bd_t *bd)
{
- ulong base, size;
+ phys_addr_t base;
+ phys_size_t size;
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCIE1
ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
#endif
+#ifdef CONFIG_FSL_SGMII_RISER
+ fsl_sgmii_riser_fdt_fixup(blob);
+#endif
}
#endif