MPC8xxx DDR: align informational prints

[platform/kernel/u-boot.git] / board / freescale / mpc8568mds / mpc8568mds.c

diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c
index 60e22de..a504f8a 100644 (file)
--- a/board/freescale/mpc8568mds/mpc8568mds.c
+++ b/board/freescale/mpc8568mds/mpc8568mds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007,2009 Freescale Semiconductor, Inc.
+ * Copyright 2007,2009-2010 Freescale Semiconductor, Inc.
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
@@ -29,6 +29,7 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
 #include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
 #include <spd_sdram.h>
 #include <i2c.h>
 #include <ioports.h>
@@ -100,7 +101,6 @@ const qe_iop_conf_t qe_iop_conf_tab[] = {
 };
 
 void local_bus_init(void);
-void sdram_init(void);
 
 int board_early_init_f (void)
 {
@@ -137,43 +137,6 @@ int checkboard (void)
        return 0;
 }
 
-phys_size_t
-initdram(int board_type)
-{
-       long dram_size = 0;
-
-       puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
-       {
-               /*
-                * Work around to stabilize DDR DLL MSYNC_IN.
-                * Errata DDR9 seems to have been fixed.
-                * This is now the workaround for Errata DDR11:
-                *    Override DLL = 1, Course Adj = 1, Tap Select = 0
-                */
-
-               volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
-               gur->ddrdllcr = 0x81000000;
-               asm("sync;isync;msync");
-               udelay(200);
-       }
-#endif
-
-       dram_size = fsl_ddr_sdram();
-       dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-       dram_size *= 0x100000;
-
-       /*
-        * SDRAM Initialization
-        */
-       sdram_init();
-
-       puts("    DDR: ");
-       return dram_size;
-}
-
 /*
  * Initialize Local Bus
  */
@@ -181,7 +144,7 @@ void
 local_bus_init(void)
 {
        volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-       volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+       volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
 
        uint clkdiv;
        uint lbc_hz;
@@ -208,33 +171,29 @@ local_bus_init(void)
 /*
  * Initialize SDRAM memory on the Local Bus.
  */
-void
-sdram_init(void)
+void lbc_sdram_init(void)
 {
 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
 
        uint idx;
-       volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+       volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
        uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
        uint lsdmr_common;
 
-       puts("    SDRAM: ");
-
-       print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+       puts("LBC SDRAM: ");
+       print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
+                  "\n       ");
 
        /*
         * Setup SDRAM Base and Option Registers
         */
-       lbc->or2 = CONFIG_SYS_OR2_PRELIM;
-       asm("msync");
-
-       lbc->br2 = CONFIG_SYS_BR2_PRELIM;
+       set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
+       set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
        asm("msync");
 
        lbc->lbcr = CONFIG_SYS_LBC_LBCR;
        asm("msync");
 
-
        lbc->lsrt = CONFIG_SYS_LBC_LSRT;
        lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
        asm("msync");
@@ -381,7 +340,7 @@ void pci_init_board(void)
        if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
                SET_STD_PCI_INFO(pci_info[num], 1);
                pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
-               printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+               printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
                        (pci_32) ? 32 : 64,
                        (pci_speed == 33333000) ? "33" :
                        (pci_speed == 66666000) ? "66" : "unknown",
@@ -393,7 +352,7 @@ void pci_init_board(void)
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pci1_hose, first_free_busno);
        } else {
-               printf ("    PCI: disabled\n");
+               printf("PCI: disabled\n");
        }
 
        puts("\n");
@@ -402,19 +361,19 @@ void pci_init_board(void)
 #endif
 
 #ifdef CONFIG_PCIE1
-       pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+       pcie_configured = is_serdes_configured(PCIE1);
 
        if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
                SET_STD_PCIE_INFO(pci_info[num], 1);
                pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf ("    PCIE1 connected to Slot as %s (base addr %lx)\n",
-                               pcie_ep ? "End Point" : "Root Complex",
+               printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
+                               pcie_ep ? "Endpoint" : "Root Complex",
                                pci_info[num].regs);
 
                first_free_busno = fsl_pci_init_port(&pci_info[num++],
                                        &pcie1_hose, first_free_busno);
        } else {
-               printf ("    PCIE1: disabled\n");
+               printf("PCIE1: disabled\n");
        }
 
        puts("\n");
@@ -429,11 +388,6 @@ void ft_board_setup(void *blob, bd_t *bd)
 {
        ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_PCI1
-       ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCIE1
-       ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
-#endif
+       FT_FSL_PCI_SETUP;
 }
 #endif