/*
* (C) Copyright 2007-2009 DENX Software Engineering
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
DECLARE_GLOBAL_DATA_PTR;
-/* Clocks in use */
-#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
- CLOCK_SCCR1_DDR_EN | \
- CLOCK_SCCR1_FEC_EN | \
- CLOCK_SCCR1_LPC_EN | \
- CLOCK_SCCR1_NFC_EN | \
- CLOCK_SCCR1_PATA_EN | \
- CLOCK_SCCR1_PCI_EN | \
- CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \
- CLOCK_SCCR1_PSCFIFO_EN | \
- CLOCK_SCCR1_TPR_EN)
-
-#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_DIU_EN | \
- CLOCK_SCCR2_I2C_EN | \
- CLOCK_SCCR2_MEM_EN | \
- CLOCK_SCCR2_SPDIF_EN)
-
void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip);
/* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */
int board_early_init_f(void)
{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- u32 spridr;
-
- /*
- * Initialize Local Window for the CPLD registers access (CS2 selects
- * the CPLD chip)
- */
- out_be32(&im->sysconf.lpcs2aw,
- CSAW_START(CONFIG_SYS_CPLD_BASE) |
- CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE)
- );
- out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
- sync_law(&im->sysconf.lpcs2aw);
-
/*
* Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control
*
* write commands in order to establish the device ID.
*/
-#ifdef CONFIG_ADS5121_REV2
+#ifdef CONFIG_MPC5121ADS_REV2
out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1);
#else
if (in_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) {
out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0x32);
}
#endif
- /*
- * Configure Flash Speed
- */
- out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
-
- spridr = in_be32(&im->sysconf.spridr);
-
- if (SVR_MJREV (spridr) >= 2)
- out_be32 (&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
-
- /*
- * Enable clocks
- */
- out_be32 (&im->clk.sccr[0], SCCR1_CLOCKS_EN);
- out_be32 (&im->clk.sccr[1], SCCR2_CLOCKS_EN);
-#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
- setbits_be32 (&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN);
-#endif
-
return 0;
}
return(ismicron);
}
-phys_size_t initdram(int board_type)
+int dram_init(void)
{
u32 msize = 0;
/*
sizeof(elpida_init_sequence)/sizeof(u32));
}
- return msize;
+ gd->ram_size = msize;
+
+ return 0;
}
int misc_init_r(void)
{
- u8 tmp_val;
-
- /* Using this for DIU init before the driver in linux takes over
- * Enable the TFP410 Encoder (I2C address 0x38)
- */
-
- i2c_set_bus_num(2);
- tmp_val = 0xBF;
- i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
- /* Verify if enabled */
- tmp_val = 0;
- i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
- debug("DVI Encoder Read: 0x%02lx\n", tmp_val);
-
- tmp_val = 0x10;
- i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
- /* Verify if enabled */
- tmp_val = 0;
- i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
- debug("DVI Encoder Read: 0x%02lx\n", tmp_val);
-
-#ifdef CONFIG_FSL_DIU_FB
-# if !(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE))
- mpc5121_diu_init();
-# endif
-#endif
return 0;
}
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 spridr = in_be32(&im->sysconf.spridr);
- printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
+ printf ("Board: MPC5121ADS rev. 0x%04x (CPLD rev. 0x%02x)\n",
brd_rev, cpld_rev);
/* initialize function mux & slew rate IO inter alia on IO Pins */
return 0;
}
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+ return 0;
}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+#endif /* CONFIG_OF_BOARD_SETUP */