doc: update reference to README.board

[platform/kernel/u-boot.git] / board / freescale / m52277evb / README

diff --git a/board/freescale/m52277evb/README b/board/freescale/m52277evb/README
index b6e955b..8bfd812 100644 (file)
--- a/board/freescale/m52277evb/README
+++ b/board/freescale/m52277evb/README
@@ -22,7 +22,7 @@ Changed files:
 - arch/m68k/cpu/mcf5227x/config.mk     config make
 - arch/m68k/cpu/mcf5227x/start.S               start up assembly code
 
-- doc/README.m52277evb         This readme file
+- board/freescale/m52277evb/README     This readme file
 
 - drivers/serial/mcfuart.c     ColdFire common UART driver
 - drivers/rtc/mcfrtc.c         Realtime clock Driver
@@ -49,7 +49,7 @@ Changed files:
 - include/asm-m68k/timer.h             Timer structure and definition
 - include/asm-m68k/types.h             Data types definition
 - include/asm-m68k/uart.h              Uart structure and definition
-- include/asm-m68k/u-boot.h            u-boot structure
+- include/asm-m68k/u-boot.h            U-Boot structure
 
 - include/configs/M52277EVB.h          Board specific configuration file
 
@@ -67,7 +67,6 @@ Changed files:
 1.2 Configuration settings for M52277EVB Development Board
 CONFIG_MCF5227x                -- define for all MCF5227x CPUs
 CONFIG_M52277          -- define for all Freescale MCF52277 CPUs
-CONFIG_M52277EVB       -- define for M52277EVB board
 
 CONFIG_MCFUART         -- define to use common CF Uart driver
 CONFIG_SYS_UART_PORT           -- define UART port number, start with 0, 1 and 2
@@ -77,14 +76,12 @@ CONFIG_MCFRTC               -- define to use common CF RTC driver
 CONFIG_SYS_MCFRTC_BASE         -- provide base address for RTC in immap.h
 CONFIG_SYS_RTC_OSCILLATOR      -- define RTC clock frequency
 RTC_DEBUG              -- define to show RTC debug message
-CONFIG_CMD_DATE                -- enable to use date feature in u-boot
+CONFIG_CMD_DATE                -- enable to use date feature in U-Boot
 
 CONFIG_MCFTMR          -- define to use DMA timer
-CONFIG_MCFPIT          -- define to use PIT timer
 
-CONFIG_FSL_I2C         -- define to use FSL common I2C driver
-CONFIG_HARD_I2C                -- define for I2C hardware support
-CONFIG_SOFT_I2C                -- define for I2C bit-banged
+CONFIG_SYS_I2C_FSL     -- define to use FSL common I2C driver
+CONFIG_SYS_I2C_SOFT    -- define for I2C bit-banged
 CONFIG_SYS_I2C_SPEED           -- define for I2C speed
 CONFIG_SYS_I2C_SLAVE           -- define for I2C slave address
 CONFIG_SYS_I2C_OFFSET          -- define for I2C base address offset
@@ -102,7 +99,7 @@ CONFIG_SYS_CSn_CTRL  -- defines the Chip Select Control register
 
 CONFIG_SYS_SDRAM_BASE  -- defines the DRAM Base
 
-CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot,
+CONFIG_LCD and CONFIG_CMD_USB are not supported in this current U-Boot,
 update will be provided at later time
 
 2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
@@ -113,7 +110,7 @@ update will be provided at later time
        SRAM:           0x80000000-0x8FFFFFFF (256MB)
        IP:             0xF0000000-0xFFFFFFFF (256MB)
 
-2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+2.2. For the initial bringup, we adopted a consistent memory scheme between U-Boot and
        linux kernel, you can customize it based on your system requirements:
        Flash0:         0x00000000-0x00FFFFFF (16MB)