Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq

[platform/kernel/u-boot.git] / board / freescale / ls1046aqds / ls1046aqds.c

diff --git a/board/freescale/ls1046aqds/ls1046aqds.c b/board/freescale/ls1046aqds/ls1046aqds.c
index aac5d9a..33b1027 100644 (file)
--- a/board/freescale/ls1046aqds/ls1046aqds.c
+++ b/board/freescale/ls1046aqds/ls1046aqds.c
@@ -1,12 +1,14 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2016 Freescale Semiconductor, Inc.
+ * Copyright 2019-2020 NXP
  */
 
 #include <common.h>
 #include <i2c.h>
 #include <fdt_support.h>
 #include <fsl_ddr_sdram.h>
+#include <init.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
@@ -33,6 +35,10 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_SYS_I2C_EARLY_INIT
+void i2c_early_init_f(void);
+#endif
+
 #ifdef CONFIG_TFABOOT
 struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = {
        {
@@ -269,11 +275,23 @@ u32 get_lpuart_clk(void)
 }
 #endif
 
-int select_i2c_ch_pca9547(u8 ch)
+int select_i2c_ch_pca9547(u8 ch, int bus_num)
 {
        int ret;
+#ifdef CONFIG_DM_I2C
+       struct udevice *dev;
 
+       ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
+                                     1, &dev);
+       if (ret) {
+               printf("%s: Cannot find udev for a bus %d\n", __func__,
+                      bus_num);
+               return ret;
+       }
+       ret = dm_i2c_write(dev, 0, &ch, 1);
+#else
        ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+#endif
        if (ret) {
                puts("PCA: failed to select proper channel\n");
                return ret;
@@ -288,8 +306,10 @@ int dram_init(void)
         * When resuming from deep sleep, the I2C channel may not be
         * in the default channel. So, switch to the default channel
         * before accessing DDR SPD.
+        *
+        * PCA9547 mount on I2C1 bus
         */
-       select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+       select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
        fsl_initdram();
 #if (!defined(CONFIG_SPL) && !defined(CONFIG_TFABOOT)) || \
        defined(CONFIG_SPL_BUILD)
@@ -302,11 +322,12 @@ int dram_init(void)
 
 int i2c_multiplexer_select_vid_channel(u8 channel)
 {
-       return select_i2c_ch_pca9547(channel);
+       return select_i2c_ch_pca9547(channel, 0);
 }
 
 int board_early_init_f(void)
 {
+       u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR;
 #ifdef CONFIG_HAS_FSL_XHCI_USB
        struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
        u32 usb_pwrfault;
@@ -315,6 +336,11 @@ int board_early_init_f(void)
        u8 uart;
 #endif
 
+       /*
+        * Enable secure system counter for timer
+        */
+       out_le32(cntcr, 0x1);
+
 #ifdef CONFIG_SYS_I2C_EARLY_INIT
        i2c_early_init_f();
 #endif
@@ -394,7 +420,7 @@ int misc_init_r(void)
 
 int board_init(void)
 {
-       select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+       select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
 
 #ifdef CONFIG_SYS_FSL_SERDES
        config_serdes_mux();
@@ -429,7 +455,7 @@ int board_init(void)
 }
 
 #ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, struct bd_info *bd)
 {
        u64 base[CONFIG_NR_DRAM_BANKS];
        u64 size[CONFIG_NR_DRAM_BANKS];
@@ -445,7 +471,9 @@ int ft_board_setup(void *blob, bd_t *bd)
        ft_cpu_setup(blob, bd);
 
 #ifdef CONFIG_SYS_DPAA_FMAN
+#ifndef CONFIG_DM_ETH
        fdt_fixup_fman_ethernet(blob);
+#endif
        fdt_fixup_board_enet(blob);
 #endif