+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2015 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
+ * Copyright 2021-2022 NXP
*/
#include <common.h>
#include <i2c.h>
+#include <init.h>
+#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch/soc.h>
+#include <asm/arch-fsl-layerscape/fsl_icid.h>
#include <fdt_support.h>
#include <hwconfig.h>
#include <ahci.h>
#include <fm_eth.h>
#include <fsl_esdhc.h>
#include <fsl_ifc.h>
-#include <fsl_sec.h>
#include "cpld.h"
#ifdef CONFIG_U_QE
#include <fsl_qe.h>
#endif
-#ifdef CONFIG_FSL_LS_PPA
#include <asm/arch/ppa.h>
-#endif
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_TFABOOT
+struct ifc_regs ifc_cfg_nor_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = {
+ {
+ "nor",
+ CONFIG_SYS_NOR_CSPR,
+ CONFIG_SYS_NOR_CSPR_EXT,
+ CONFIG_SYS_NOR_AMASK,
+ CONFIG_SYS_NOR_CSOR,
+ {
+ CONFIG_SYS_NOR_FTIM0,
+ CONFIG_SYS_NOR_FTIM1,
+ CONFIG_SYS_NOR_FTIM2,
+ CONFIG_SYS_NOR_FTIM3
+ },
+
+ },
+ {
+ "nand",
+ CONFIG_SYS_NAND_CSPR,
+ CONFIG_SYS_NAND_CSPR_EXT,
+ CONFIG_SYS_NAND_AMASK,
+ CONFIG_SYS_NAND_CSOR,
+ {
+ CONFIG_SYS_NAND_FTIM0,
+ CONFIG_SYS_NAND_FTIM1,
+ CONFIG_SYS_NAND_FTIM2,
+ CONFIG_SYS_NAND_FTIM3
+ },
+ },
+ {
+ "cpld",
+ CONFIG_SYS_CPLD_CSPR,
+ CONFIG_SYS_CPLD_CSPR_EXT,
+ CONFIG_SYS_CPLD_AMASK,
+ CONFIG_SYS_CPLD_CSOR,
+ {
+ CONFIG_SYS_CPLD_FTIM0,
+ CONFIG_SYS_CPLD_FTIM1,
+ CONFIG_SYS_CPLD_FTIM2,
+ CONFIG_SYS_CPLD_FTIM3
+ },
+ }
+};
+
+struct ifc_regs ifc_cfg_nand_boot[CONFIG_SYS_FSL_IFC_BANK_COUNT] = {
+ {
+ "nand",
+ CONFIG_SYS_NAND_CSPR,
+ CONFIG_SYS_NAND_CSPR_EXT,
+ CONFIG_SYS_NAND_AMASK,
+ CONFIG_SYS_NAND_CSOR,
+ {
+ CONFIG_SYS_NAND_FTIM0,
+ CONFIG_SYS_NAND_FTIM1,
+ CONFIG_SYS_NAND_FTIM2,
+ CONFIG_SYS_NAND_FTIM3
+ },
+ },
+ {
+ "nor",
+ CONFIG_SYS_NOR_CSPR,
+ CONFIG_SYS_NOR_CSPR_EXT,
+ CONFIG_SYS_NOR_AMASK,
+ CONFIG_SYS_NOR_CSOR,
+ {
+ CONFIG_SYS_NOR_FTIM0,
+ CONFIG_SYS_NOR_FTIM1,
+ CONFIG_SYS_NOR_FTIM2,
+ CONFIG_SYS_NOR_FTIM3
+ },
+ },
+ {
+ "cpld",
+ CONFIG_SYS_CPLD_CSPR,
+ CONFIG_SYS_CPLD_CSPR_EXT,
+ CONFIG_SYS_CPLD_AMASK,
+ CONFIG_SYS_CPLD_CSOR,
+ {
+ CONFIG_SYS_CPLD_FTIM0,
+ CONFIG_SYS_CPLD_FTIM1,
+ CONFIG_SYS_CPLD_FTIM2,
+ CONFIG_SYS_CPLD_FTIM3
+ },
+ }
+};
+
+void ifc_cfg_boot_info(struct ifc_regs_info *regs_info)
+{
+ enum boot_src src = get_boot_src();
+
+ if (src == BOOT_SOURCE_IFC_NAND)
+ regs_info->regs = ifc_cfg_nand_boot;
+ else
+ regs_info->regs = ifc_cfg_nor_boot;
+ regs_info->cs_size = CONFIG_SYS_FSL_IFC_BANK_COUNT;
+}
+
+#endif
+int board_early_init_f(void)
+{
+ fsl_lsch2_early_init_f();
+
+ return 0;
+}
+
+#ifndef CONFIG_SPL_BUILD
+
int checkboard(void)
{
+#ifdef CONFIG_TFABOOT
+ enum boot_src src = get_boot_src();
+#endif
static const char *freq[2] = {"100.00MHZ", "156.25MHZ"};
#ifndef CONFIG_SD_BOOT
u8 cfg_rcw_src1, cfg_rcw_src2;
printf("Board: LS1043ARDB, boot from ");
+#ifdef CONFIG_TFABOOT
+ if (src == BOOT_SOURCE_SD_MMC)
+ puts("SD\n");
+ else {
+#endif
+
#ifdef CONFIG_SD_BOOT
puts("SD\n");
#else
if (cfg_rcw_src == 0x25)
printf("vBank %d\n", CPLD_READ(vbank));
- else if (cfg_rcw_src == 0x106)
+ else if ((cfg_rcw_src == 0x106) || (cfg_rcw_src == 0x118))
puts("NAND\n");
else
printf("Invalid setting of SW4\n");
#endif
+#ifdef CONFIG_TFABOOT
+ }
+#endif
printf("CPLD: V%x.%x\nPCBA: V%x.0\n", CPLD_READ(cpld_ver),
CPLD_READ(cpld_ver_sub), CPLD_READ(pcba_ver));
return 0;
}
-int board_early_init_f(void)
-{
- fsl_lsch2_early_init_f();
-
- return 0;
-}
-
int board_init(void)
{
- struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_FSL_SCFG_ADDR;
#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
erratum_a010315();
init_final_memctl_regs();
#endif
-#ifdef CONFIG_SECURE_BOOT
+#ifdef CONFIG_NXP_ESBC
/* In case of Secure Boot, the IBR configures the SMMU
* to allow only Secure transactions.
* SMMU must be reset in bypass mode.
out_le32(SMMU_NSCR0, val);
#endif
-#ifdef CONFIG_FSL_CAAM
- sec_init();
-#endif
-
#ifdef CONFIG_FSL_LS_PPA
ppa_init();
#endif
+#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH)
+ pci_init();
+#endif
+
#ifdef CONFIG_U_QE
u_qe_init();
#endif
int config_board_mux(void)
{
- struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+ struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_FSL_SCFG_ADDR;
u32 usb_pwrfault;
if (hwconfig("qe-hdlc")) {
}
}
-int ft_board_setup(void *blob, bd_t *bd)
+/* Update the address of the Aquantia PHY on the MDIO bus for boards revision
+ * v7.0 and up. Also rename the PHY node to align with the address change.
+ */
+void fdt_fixup_phy_addr(void *blob)
+{
+ const char phy_path[] =
+ "/soc/fman@1a00000/mdio@fd000/ethernet-phy@1";
+ int ret, offset, new_addr = AQR113C_PHY_ADDR;
+ char new_name[] = "ethernet-phy@00";
+
+ if (CPLD_READ(pcba_ver) < 0x7)
+ return;
+
+ offset = fdt_path_offset(blob, phy_path);
+ if (offset < 0) {
+ printf("ethernet-phy@1 node not found in the dts\n");
+ return;
+ }
+
+ ret = fdt_setprop_u32(blob, offset, "reg", new_addr);
+ if (ret < 0) {
+ printf("Unable to set 'reg' for node ethernet-phy@1: %s\n",
+ fdt_strerror(ret));
+ return;
+ }
+
+ sprintf(new_name, "ethernet-phy@%x", new_addr);
+ ret = fdt_set_name(blob, offset, new_name);
+ if (ret < 0)
+ printf("Unable to rename node ethernet-phy@1: %s\n",
+ fdt_strerror(ret));
+}
+
+int ft_board_setup(void *blob, struct bd_info *bd)
{
u64 base[CONFIG_NR_DRAM_BANKS];
u64 size[CONFIG_NR_DRAM_BANKS];
ft_cpu_setup(blob, bd);
#ifdef CONFIG_SYS_DPAA_FMAN
+#ifndef CONFIG_DM_ETH
fdt_fixup_fman_ethernet(blob);
#endif
+ fdt_fixup_phy_addr(blob);
+#endif
+
+ fdt_fixup_icid(blob);
/*
* qe-hdlc and usb multi-use the pins,
return 0;
}
+void nand_fixup(void)
+{
+ u32 csor = 0;
+
+ if (CPLD_READ(pcba_ver) < 0x7)
+ return;
+
+ /* Change NAND Flash PGS/SPRZ configuration */
+ csor = CONFIG_SYS_NAND_CSOR;
+ if ((csor & CSOR_NAND_PGS_MASK) == CSOR_NAND_PGS_2K)
+ csor = (csor & ~(CSOR_NAND_PGS_MASK)) | CSOR_NAND_PGS_4K;
+
+ if ((csor & CSOR_NAND_SPRZ_MASK) == CSOR_NAND_SPRZ_64)
+ csor = (csor & ~(CSOR_NAND_SPRZ_MASK)) | CSOR_NAND_SPRZ_224;
+
+ if (IS_ENABLED(CONFIG_TFABOOT)) {
+ u8 cfg_rcw_src1, cfg_rcw_src2;
+ u16 cfg_rcw_src;
+
+ cfg_rcw_src1 = CPLD_READ(cfg_rcw_src1);
+ cfg_rcw_src2 = CPLD_READ(cfg_rcw_src2);
+ cpld_rev_bit(&cfg_rcw_src1);
+ cfg_rcw_src = cfg_rcw_src1;
+ cfg_rcw_src = (cfg_rcw_src << 1) | cfg_rcw_src2;
+
+ if (cfg_rcw_src == 0x25)
+ set_ifc_csor(IFC_CS1, csor);
+ else if (cfg_rcw_src == 0x118)
+ set_ifc_csor(IFC_CS0, csor);
+ else
+ printf("Invalid setting\n");
+ } else {
+ if (IS_ENABLED(CONFIG_NAND_BOOT))
+ set_ifc_csor(IFC_CS0, csor);
+ else
+ set_ifc_csor(IFC_CS1, csor);
+ }
+}
+
+#if IS_ENABLED(CONFIG_OF_BOARD_FIXUP)
+int board_fix_fdt(void *blob)
+{
+ /* nand driver fix up */
+ nand_fixup();
+
+ /* fdt fix up */
+ fdt_fixup_phy_addr(blob);
+
+ return 0;
+}
+#endif
+
u8 flash_read8(void *addr)
{
return __raw_readb(addr + 1);
return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00);
}
+
+#endif
projects / platform / kernel / u-boot.git / blobdiff