global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace
[platform/kernel/u-boot.git] / board / freescale / ls1043aqds / ls1043aqds.c
index 613686e..b02f649 100644 (file)
@@ -1,15 +1,17 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
- * Copyright 2019 NXP
+ * Copyright 2019-2020 NXP
  */
 
 #include <common.h>
+#include <clock_legacy.h>
 #include <i2c.h>
 #include <fdt_support.h>
 #include <fsl_ddr_sdram.h>
 #include <init.h>
 #include <log.h>
+#include <asm/global_data.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
@@ -27,6 +29,7 @@
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
 #include <spl.h>
+#include "../common/i2c_mux.h"
 
 #include "../common/qixis.h"
 #include "ls1043aqds_qixis.h"
@@ -274,32 +277,6 @@ unsigned long get_board_ddr_clk(void)
        return 66666666;
 }
 
-int select_i2c_ch_pca9547(u8 ch, int bus_num)
-{
-       int ret;
-
-#ifdef CONFIG_DM_I2C
-       struct udevice *dev;
-
-       ret = i2c_get_chip_for_busnum(bus_num, I2C_MUX_PCA_ADDR_PRI,
-                                     1, &dev);
-       if (ret) {
-               printf("%s: Cannot find udev for a bus %d\n", __func__,
-                      bus_num);
-               return ret;
-       }
-       ret = dm_i2c_write(dev, 0, &ch, 1);
-#else
-       ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
-#endif
-       if (ret) {
-               puts("PCA: failed to select proper channel\n");
-               return ret;
-       }
-
-       return 0;
-}
-
 int dram_init(void)
 {
        /*
@@ -333,7 +310,7 @@ void board_retimer_init(void)
        /* Retimer is connected to I2C1_CH7_CH5 */
        select_i2c_ch_pca9547(I2C_MUX_CH7, bus_num);
        reg = I2C_MUX_CH5;
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *dev;
        int ret;
 
@@ -453,19 +430,23 @@ void board_retimer_init(void)
 
 int board_early_init_f(void)
 {
+       u32 __iomem *cntcr = (u32 *)CFG_SYS_FSL_TIMER_ADDR;
 #ifdef CONFIG_HAS_FSL_XHCI_USB
-       struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
+       struct ccsr_scfg *scfg = (struct ccsr_scfg *)CFG_SYS_FSL_SCFG_ADDR;
        u32 usb_pwrfault;
 #endif
 #ifdef CONFIG_LPUART
        u8 uart;
 #endif
 
-#ifdef CONFIG_SYS_I2C
-#ifdef CONFIG_SYS_I2C_EARLY_INIT
+       /*
+        * Enable secure system counter for timer
+        */
+       out_le32(cntcr, 0x1);
+
+#if defined(CONFIG_SYS_I2C_EARLY_INIT)
        i2c_early_init_f();
 #endif
-#endif
        fsl_lsch2_early_init_f();
 
 #ifdef CONFIG_HAS_FSL_XHCI_USB
@@ -494,7 +475,7 @@ int board_early_init_f(void)
 bool is_warm_boot(void)
 {
 #define DCFG_CCSR_CRSTSR_WDRFR (1 << 3)
-       struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
+       struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
 
        if (in_be32(&gur->crstsr) & DCFG_CCSR_CRSTSR_WDRFR)
                return 1;
@@ -548,7 +529,7 @@ int board_init(void)
        select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT, 0);
        board_retimer_init();
 
-#ifdef CONFIG_SYS_FSL_SERDES
+#ifdef CFG_SYS_FSL_SERDES
        config_serdes_mux();
 #endif
 
@@ -575,10 +556,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
        fdt_fixup_memory_banks(blob, base, size, 2);
        ft_cpu_setup(blob, bd);
 
-#ifdef CONFIG_SYS_DPAA_FMAN
-#ifndef CONFIG_DM_ETH
-       fdt_fixup_fman_ethernet(blob);
-#endif
+#ifdef CONFIG_FMAN_ENET
        fdt_fixup_board_enet(blob);
 #endif
 
@@ -618,6 +596,6 @@ u16 flash_read16(void *addr)
 #if defined(CONFIG_TFABOOT) && defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 void *env_sf_get_env_addr(void)
 {
-       return (void *)(CONFIG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET);
+       return (void *)(CFG_SYS_FSL_QSPI_BASE + CONFIG_ENV_OFFSET);
 }
 #endif