layerscape: Disable CONFIG_FMAN_ENET on *aqds* platforms

[platform/kernel/u-boot.git] / board / freescale / ls1012ardb / eth.c

diff --git a/board/freescale/ls1012ardb/eth.c b/board/freescale/ls1012ardb/eth.c
index a65ff4d..565f800 100644 (file)
--- a/board/freescale/ls1012ardb/eth.c
+++ b/board/freescale/ls1012ardb/eth.c
@@ -29,7 +29,7 @@ static inline void ls1012ardb_reset_phy(void)
 {
 #ifdef CONFIG_TARGET_LS1012ARDB
        /* Through reset IO expander reset both RGMII and SGMII PHYs */
-#ifdef CONFIG_DM_I2C
+#if CONFIG_IS_ENABLED(DM_I2C)
        struct udevice *dev;
        int ret;
 
@@ -121,12 +121,12 @@ int pfe_eth_board_init(struct udevice *dev)
                        /* MAC1 */
                        pfe_set_phy_address_mode(priv->gemac_port,
                                                 CONFIG_PFE_EMAC1_PHY_ADDR,
-                                                PHY_INTERFACE_MODE_SGMII_2500);
+                                                PHY_INTERFACE_MODE_2500BASEX);
                } else {
                        /* MAC2 */
                        pfe_set_phy_address_mode(priv->gemac_port,
                                                 CONFIG_PFE_EMAC2_PHY_ADDR,
-                                                PHY_INTERFACE_MODE_SGMII_2500);
+                                                PHY_INTERFACE_MODE_2500BASEX);
                }
                break;
        default:
@@ -160,12 +160,12 @@ static struct pfe_eth_pdata pfe_pdata1 = {
        },
 };
 
-U_BOOT_DEVICE(ls1012a_pfe0) = {
+U_BOOT_DRVINFO(ls1012a_pfe0) = {
        .name = "pfe_eth",
-       .platdata = &pfe_pdata0,
+       .plat = &pfe_pdata0,
 };
 
-U_BOOT_DEVICE(ls1012a_pfe1) = {
+U_BOOT_DRVINFO(ls1012a_pfe1) = {
        .name = "pfe_eth",
-       .platdata = &pfe_pdata1,
+       .plat = &pfe_pdata1,
 };