+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright 2011 Freescale Semiconductor
+ * Copyright 2020 NXP
* Author: Shengzhou Liu <Shengzhou.Liu@freescale.com>
*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
* This file provides support for the QIXIS of some Freescale reference boards.
*/
u8 gdc;
u8 gdd; /* DCM Debug Data Register,0x17 */
u8 dmack;
- u8 res1[6];
+ u8 res1;
+ u8 sdhc1;
+ u8 sdhc2;
+ u8 stat_pres3;
+ u8 los_stat;
+ u8 usb_ctl;
u8 watch; /* Watchdog Register,0x1F */
u8 pwr_ctl[2]; /* Power Control Register,0x20 */
u8 res2[2];
u8 clk_freq[6]; /* Clock Measurement Registers */
u8 res_c6[8];
u8 clk_base[2]; /* Clock Frequency Base Reg */
- u8 res_d0[16];
+ u8 res_d0[8];
+ u8 cms[2]; /* Core Management Space Address Register, 0xD8 */
+ u8 res_c0[6];
u8 aux2[4]; /* Auxiliary Registers,0xE0 */
u8 res14[10];
u8 aux_ad;
void qixis_write_i2c(unsigned int reg, u8 value);
#endif
+#if defined(CONFIG_QIXIS_I2C_ACCESS) && defined(CONFIG_SYS_I2C_FPGA_ADDR)
+#define QIXIS_READ(reg) qixis_read_i2c(offsetof(struct qixis, reg))
+#define QIXIS_WRITE(reg, value) \
+ qixis_write_i2c(offsetof(struct qixis, reg), value)
+#else
#define QIXIS_READ(reg) qixis_read(offsetof(struct qixis, reg))
#define QIXIS_WRITE(reg, value) qixis_write(offsetof(struct qixis, reg), value)
+#endif
+
#ifdef CONFIG_SYS_I2C_FPGA_ADDR
#define QIXIS_READ_I2C(reg) qixis_read_i2c(offsetof(struct qixis, reg))
#define QIXIS_WRITE_I2C(reg, value) \
qixis_write_i2c(offsetof(struct qixis, reg), value)
#endif
+/* Use for SDHC adapter card type identification and operation */
+#define QIXIS_SDID_MASK 0x07
+
+#define QIXIS_ESDHC_ADAPTER_TYPE_EMMC45 0x1 /* eMMC Card Rev4.5 */
+#define QIXIS_ESDHC_ADAPTER_TYPE_SDMMC_LEGACY 0x2 /* SD/MMC Legacy Card */
+#define QIXIS_ESDHC_ADAPTER_TYPE_EMMC44 0x3 /* eMMC Card Rev4.4 */
+#define QIXIS_ESDHC_ADAPTER_TYPE_RSV 0x4 /* Reserved */
+#define QIXIS_ESDHC_ADAPTER_TYPE_MMC 0x5 /* MMC Card */
+#define QIXIS_ESDHC_ADAPTER_TYPE_SD 0x6 /* SD Card Rev2.0 3.0 */
+#define QIXIS_ESDHC_NO_ADAPTER 0x7 /* No Card is Present*/
+
+#define QIXIS_SDHC1_S1V3 0x80 /* SDHC1: SDHC1 3.3V power control */
+#define QIXIS_SDHC1_VS 0x30 /* BRDCFG11: route to SDHC1_VS */
+
+#define QIXIS_SDCLKIN 0x08
+#define QIXIS_SDCLKOUT 0x02
+#define QIXIS_DAT5_6_7 0X02
+#define QIXIS_DAT4 0X01
+
+#define QIXIS_EVDD_BY_SDHC_VS 0x0c
+
+#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS) || \
+defined(CONFIG_TARGET_LX2160ARDB)
+#define QIXIS_XMAP_MASK 0x07
+#define QIXIS_RST_CTL_RESET_EN 0x30
+#define QIXIS_LBMAP_DFLTBANK 0x00
+#define QIXIS_LBMAP_ALTBANK 0x20
+#define QIXIS_LBMAP_QSPI 0x00
+#define QIXIS_RCW_SRC_QSPI 0xff
+#define QIXIS_RST_CTL_RESET 0x31
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
+#define QIXIS_LBMAP_MASK 0x0f
+#define QIXIS_LBMAP_SD
+#define QIXIS_LBMAP_EMMC
+#define QIXIS_RCW_SRC_SD 0x08
+#define QIXIS_RCW_SRC_EMMC 0x09
+#define NON_EXTENDED_DUTCFG
+#endif
+
+#if defined(CONFIG_TARGET_LX2160AQDS) || defined(CONFIG_TARGET_LX2162AQDS)
+#define QIXIS_SDID_MASK 0x07
+#define QIXIS_ESDHC_NO_ADAPTER 0x7
+#endif
+
#endif