ppc4xx: Use correct io accessors for esd 405 boards

[platform/kernel/u-boot.git] / board / esd / wuh405 / wuh405.c

diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c
index 5eca3bd..e330fff 100644 (file)
--- a/board/esd/wuh405/wuh405.c
+++ b/board/esd/wuh405/wuh405.c
@@ -82,10 +82,6 @@ int board_early_init_f (void)
 
 int misc_init_r (void)
 {
-       volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
-       volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
-       volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4);
-       volatile unsigned char *duart3_mcr = (unsigned char *)((ulong)DUART3_BA + 4);
        unsigned char *dst;
        ulong len = sizeof(fpgadata);
        int status;
@@ -155,18 +151,20 @@ int misc_init_r (void)
        /*
         * Reset external DUARTs
         */
-       out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
+       out_be32((void *)GPIO0_OR,
+                in_be32((void *)GPIO0_OR) | CONFIG_SYS_DUART_RST);
        udelay(10); /* wait 10us */
-       out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
+       out_be32((void *)GPIO0_OR,
+                in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_DUART_RST);
        udelay(1000); /* wait 1ms */
 
        /*
         * Enable interrupts in exar duart mcr[3]
         */
-       *duart0_mcr = 0x08;
-       *duart1_mcr = 0x08;
-       *duart2_mcr = 0x08;
-       *duart3_mcr = 0x08;
+       out_8((void *)(DUART0_BA + 4), 0x08);
+       out_8((void *)(DUART1_BA + 4), 0x08);
+       out_8((void *)(DUART2_BA + 4), 0x08);
+       out_8((void *)(DUART3_BA + 4), 0x08);
 
        return (0);
 }