board_f: Rename initdram() to dram_init()
[platform/kernel/u-boot.git] / board / esd / vme8349 / vme8349.c
index 96698e7..36a5519 100644 (file)
@@ -9,24 +9,7 @@
  * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
  * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.)
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
 #include <i2c.h>
 #include <netdev.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 void ddr_enable_ecc(unsigned int dram_size);
 
-phys_size_t initdram(int board_type)
+int dram_init(void)
 {
        volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
        u32 msize = 0;
 
        if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
-               return -1;
+               return -ENXIO;
 
        /* DDR SDRAM - Main memory */
        im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
@@ -69,7 +54,9 @@ phys_size_t initdram(int board_type)
        msize = get_ram_size(0, msize);
 
        /* return total bus SDRAM size(bytes)  -- DDR */
-       return msize * 1024 * 1024;
+       gd->ram_size = msize * 1024 * 1024;
+
+       return 0;
 }
 
 int checkboard(void)
@@ -91,13 +78,15 @@ int board_eth_init(bd_t *bis)
 #endif
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
 {
        ft_cpu_setup(blob, bd);
 
 #ifdef CONFIG_PCI
        ft_pci_setup(blob, bd);
 #endif
+
+       return 0;
 }
 #endif
 
@@ -186,11 +175,11 @@ static spd_eeprom_t default_spd_eeprom = {
 
 int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
 {
-       int old_bus = I2C_GET_BUS();
+       int old_bus = i2c_get_bus_num();
        unsigned int l, sum;
        int valid = 0;
 
-       I2C_SET_BUS(0);
+       i2c_set_bus_num(0);
 
        if (i2c_read(chip, addr, alen, buffer, len) == 0)
                if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) {
@@ -215,7 +204,7 @@ int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
                buffer[63] = sum;
        }
 
-       I2C_SET_BUS(old_bus);
+       i2c_set_bus_num(old_bus);
 
        return 0;
 }