PXA: zipitz2: Add missing CONFIG_SYS_TEXT_BASE

[platform/kernel/u-boot.git] / board / delta / delta.c

diff --git a/board/delta/delta.c b/board/delta/delta.c
index 6e22774..df23076 100644 (file)
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -22,11 +22,13 @@
  */
 
 #include <common.h>
+#include <netdev.h>
 #include <i2c.h>
 #include <da9030.h>
 #include <malloc.h>
 #include <command.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -109,7 +111,7 @@ static uchar kbd_command_prefix[] = "key_cmd";
 static void get_pressed_keys(uchar *s)
 {
        unsigned long val;
-       val = GPLR3;
+       val = readl(GPLR3);
 
        if(val & (1<<31))
                *s++ = KEYBD_KP_DKIN0;
@@ -123,18 +125,18 @@ static void get_pressed_keys(uchar *s)
 
 static void keys_init()
 {
-       CKENB |= CKENB_7_GPIO;
+       writel(readl(CKENB) | CKENB_7_GPIO, CKENB);
        udelay(100);
 
        /* Configure GPIOs */
-       GPIO127 = 0xa840;       /* KP_DKIN0 */
-       GPIO114 = 0xa840;       /* KP_DKIN1 */
-       GPIO125 = 0xa840;       /* KP_DKIN2 */
-       GPIO118 = 0xa840;       /* KP_DKIN5 */
+       writel(0xa840, GPIO127);        /* KP_DKIN0 */
+       writel(0xa840, GPIO114);        /* KP_DKIN1 */
+       writel(0xa840, GPIO125);        /* KP_DKIN2 */
+       writel(0xa840, GPIO118);        /* KP_DKIN5 */
 
        /* Configure GPIOs as inputs */
-       GPDR3 &= ~(1<<31 | 1<<18 | 1<<29 | 1<<22);
-       GCDR3 = (1<<31 | 1<<18 | 1<<29 | 1<<22);
+       writel(readl(GPDR3) & ~(1<<31 | 1<<18 | 1<<29 | 1<<22), GPDR3);
+       writel((1<<31 | 1<<18 | 1<<29 | 1<<22), GCDR3);
 
        udelay(100);
 }
@@ -239,7 +241,7 @@ static uchar *key_match (uchar *kbd_data)
        return (NULL);
 }
 
-int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
        uchar kbd_data[KEYBD_DATALEN];
        char keybd_env[2 * KEYBD_DATALEN + 1];
@@ -259,8 +261,8 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(
           kbd, 1,      1,      do_kbd,
-          "kbd     - read keyboard status\n",
-          NULL
+          "read keyboard status",
+          ""
 );
 
 #endif /* DELTA_CHECK_KEYBD */
@@ -282,11 +284,11 @@ int dram_init (void)
 
 void i2c_init_board()
 {
-       CKENB |= (CKENB_4_I2C);
+       writel(readl(CKENB) | (CKENB_4_I2C), CKENB);
 
        /* setup I2C GPIO's */
-       GPIO32 = 0x801;         /* SCL = Alt. Fkt. 1 */
-       GPIO33 = 0x801;         /* SDA = Alt. Fkt. 1 */
+       writel(0x801, GPIO32);          /* SCL = Alt. Fkt. 1 */
+       writel(0x801, GPIO33);          /* SDA = Alt. Fkt. 1 */
 }
 
 /* initialize the DA9030 Power Controller */
@@ -294,20 +296,20 @@ static void init_DA9030()
 {
        uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
 
-       CKENB |= CKENB_7_GPIO;
+       writel(readl(CKENB) | CKENB_7_GPIO, CKENB);
        udelay(100);
 
        /* Rising Edge on EXTON to reset DA9030 */
-       GPIO17 = 0x8800;        /* configure GPIO17, no pullup, -down */
-       GPDR0 |= (1<<17);       /* GPIO17 is output */
-       GSDR0 = (1<<17);
-       GPCR0 = (1<<17);        /* drive GPIO17 low */
-       GPSR0 = (1<<17);        /* drive GPIO17 high */
-
-#if CFG_DA9030_EXTON_DELAY
-       udelay((unsigned long) CFG_DA9030_EXTON_DELAY); /* wait for DA9030 */
+       writel(0x8800, GPIO17); /* configure GPIO17, no pullup, -down */
+       writel(readl(GPDR0) | (1<<17), GPDR0);  /* GPIO17 is output */
+       writel((1<<17), GSDR0);
+       writel((1<<17), GPCR0); /* drive GPIO17 low */
+       writel((1<<17), GPSR0); /* drive GPIO17 high */
+
+#if CONFIG_SYS_DA9030_EXTON_DELAY
+       udelay((unsigned long) CONFIG_SYS_DA9030_EXTON_DELAY);  /* wait for DA9030 */
 #endif
-       GPCR0 = (1<<17);        /* drive GPIO17 low */
+       writel((1<<17), GPCR0); /* drive GPIO17 low */
 
        /* reset the watchdog and go active (0xec) */
        val = (SYS_CONTROL_A_HWRES_ENABLE |
@@ -363,3 +365,14 @@ void hw_watchdog_reset(void)
        i2c_reg_write(addr, SYS_CONTROL_A, val);
 }
 #endif
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+       int rc = 0;
+#ifdef CONFIG_SMC91111
+       rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
+#endif
+       return rc;
+}
+#endif