arm: Disable ATAGs support

[platform/kernel/u-boot.git] / board / davinci / da8xxevm / omapl138_lcdk.c

diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c
index 29296b0..cd021cc 100644 (file)
--- a/board/davinci/da8xxevm/omapl138_lcdk.c
+++ b/board/davinci/da8xxevm/omapl138_lcdk.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
  *
@@ -5,19 +6,19 @@
  *
  * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
+#include <env.h>
 #include <i2c.h>
+#include <init.h>
 #include <net.h>
-#include <netdev.h>
-#include <spi.h>
-#include <spi_flash.h>
 #include <asm/arch/hardware.h>
+#include <asm/global_data.h>
 #include <asm/ti-common/davinci_nand.h>
 #include <asm/io.h>
+#include <ns16550.h>
+#include <dm/platdata.h>
 #include <linux/errno.h>
 #include <asm/mach-types.h>
 #include <asm/arch/davinci_misc.h>
@@ -142,20 +143,6 @@ const int lpsc_size = ARRAY_SIZE(lpsc);
 #define CONFIG_DA850_EVM_MAX_CPU_CLK   456000000
 #endif
 
-/*
- * get_board_rev() - setup to pass kernel board revision information
- * Returns:
- * bit[0-3]    Maximum cpu clock rate supported by onboard SoC
- *             0000b - 300 MHz
- *             0001b - 372 MHz
- *             0010b - 408 MHz
- *             0011b - 456 MHz
- */
-u32 get_board_rev(void)
-{
-       return 0;
-}
-
 int board_early_init_f(void)
 {
        /*
@@ -228,23 +215,6 @@ int board_init(void)
        return 0;
 }
 
-#ifdef CONFIG_DRIVER_TI_EMAC
-
-/*
- * Initializes on-board ethernet controllers.
- */
-int board_eth_init(bd_t *bis)
-{
-       if (!davinci_emac_initialize()) {
-               printf("Error: Ethernet init failed!\n");
-               return -1;
-       }
-
-       return 0;
-}
-
-#endif /* CONFIG_DRIVER_TI_EMAC */
-
 #define CFG_MAC_ADDR_SPI_BUS   0
 #define CFG_MAC_ADDR_SPI_CS    0
 #define CFG_MAC_ADDR_SPI_MAX_HZ        CONFIG_SF_DEFAULT_SPEED
@@ -252,12 +222,6 @@ int board_eth_init(bd_t *bis)
 
 #define CFG_MAC_ADDR_OFFSET    (flash->size - SZ_64K)
 
-static int  get_mac_addr(u8 *addr)
-{
-       /* Need to find a way to get MAC ADDRESS */
-       return 0;
-}
-
 void dsp_lpsc_on(unsigned domain, unsigned int id)
 {
        dv_reg_p mdstat, mdctl, ptstat, ptcmd;
@@ -293,7 +257,7 @@ static void dspwake(void)
        if ((REG(CHIP_REV_ID_REG) & 0x3f) == 0x10)
                return;
 
-       if (!strcmp(getenv("dspwake"), "no"))
+       if (!strcmp(env_get("dspwake"), "no"))
                return;
 
        *resetvect++ = 0x1E000; /* DSP Idle */
@@ -320,29 +284,6 @@ int rmii_hw_init(void)
 
 int misc_init_r(void)
 {
-       uint8_t tmp[20], addr[10];
-
-
-       if (getenv("ethaddr") == NULL) {
-               /* Read Ethernet MAC address from EEPROM */
-               if (dvevm_read_mac_address(addr)) {
-                       /* Set Ethernet MAC address from EEPROM */
-                       davinci_sync_env_enetaddr(addr);
-               } else {
-                       get_mac_addr(addr);
-               }
-
-               if (!is_multicast_ethaddr(addr) && !is_zero_ethaddr(addr)) {
-                       sprintf((char *)tmp, "%02x:%02x:%02x:%02x:%02x:%02x",
-                               addr[0], addr[1], addr[2], addr[3], addr[4],
-                               addr[5]);
-
-                       env_set("ethaddr", (char *)tmp);
-               } else {
-                       printf("Invalid MAC address read.\n");
-               }
-       }
-
 #ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
        /* Select RMII fucntion through the expander */
        if (rmii_hw_init())
@@ -354,15 +295,15 @@ int misc_init_r(void)
        return 0;
 }
 
+#if !CONFIG_IS_ENABLED(DM_MMC)
 #ifdef CONFIG_MMC_DAVINCI
 static struct davinci_mmc mmc_sd0 = {
        .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
        .host_caps = MMC_MODE_4BIT,     /* DA850 supports only 4-bit SD/MMC */
        .voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
-       .version = MMC_CTLR_VERSION_2,
 };
 
-int board_mmc_init(bd_t *bis)
+int board_mmc_init(struct bd_info *bis)
 {
        mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID);
 
@@ -370,3 +311,39 @@ int board_mmc_init(bd_t *bis)
        return davinci_mmc_init(bis, &mmc_sd0);
 }
 #endif
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+static const struct ns16550_plat serial_pdata = {
+       .base = DAVINCI_UART2_BASE,
+       .reg_shift = 2,
+       .clock = 228000000,
+       .fcr = UART_FCR_DEFVAL,
+};
+
+U_BOOT_DRVINFO(omapl138_uart) = {
+       .name = "ns16550_serial",
+       .plat = &serial_pdata,
+};
+
+static const struct davinci_mmc_plat mmc_plat = {
+       .reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
+       .cfg = {
+               .f_min = 200000,
+               .f_max = 25000000,
+               .voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
+               .host_caps = MMC_MODE_4BIT,
+               .b_max = DAVINCI_MAX_BLOCKS,
+               .name = "da830-mmc",
+       },
+};
+U_BOOT_DRVINFO(omapl138_mmc) = {
+       .name = "ti_da830_mmc",
+       .plat = &mmc_plat,
+};
+
+void spl_board_init(void)
+{
+       davinci_configure_pin_mux(mmc0_pins, ARRAY_SIZE(mmc0_pins));
+}
+#endif