#include <common.h>
#include <asm/arch/pxa-regs.h>
+DECLARE_GLOBAL_DATA_PTR;
+
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
#else
# define SHOW_BOOT_PROGRESS(arg)
#endif
-/**
+/**
* misc_init_r: - misc initialisation routines
*/
int misc_init_r(void)
{
+#if 0
uchar *str;
-
+
/* determine if the software update key is pressed during startup */
-#if 0
/* not ported yet... */
if (GPLR0 & 0x00000800) {
printf("using bootcmd_normal (sw-update button not pressed)\n");
}
setenv("bootcmd",str);
-#endif
+#endif
return 0;
-}
+}
-/**
+/**
* board_init: - setup some data structures
*
- * @return: 0 in case of success
+ * @return: 0 in case of success
*/
int board_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
/* memory and cpu-speed are setup before relocation */
/* so we do _nothing_ here */
/* arch number of CSB226 board */
- gd->bd->bi_arch_number = 216;
+ gd->bd->bi_arch_number = MACH_TYPE_CSB226;
/* adress of boot parameters */
gd->bd->bi_boot_params = 0xa0000100;
}
-/**
+/**
* dram_init: - setup dynamic RAM
*
* @return: 0 in case of success
int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
-
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
}
-/**
+/**
* csb226_set_led: - switch LEDs on or off
*
* @param led: LED to switch (0,1,2)
{
switch(led) {
- case 0: if (state==1) {
- GPCR0 |= CSB226_USER_LED0;
+ case 0: if (state==1) {
+ GPCR0 |= CSB226_USER_LED0;
} else if (state==0) {
GPSR0 |= CSB226_USER_LED0;
}
break;
case 1: if (state==1) {
- GPCR0 |= CSB226_USER_LED1;
- } else if (state==0) {
- GPSR0 |= CSB226_USER_LED1;
- }
- break;
+ GPCR0 |= CSB226_USER_LED1;
+ } else if (state==0) {
+ GPSR0 |= CSB226_USER_LED1;
+ }
+ break;
case 2: if (state==1) {
- GPCR0 |= CSB226_USER_LED2;
- } else if (state==0) {
- GPSR0 |= CSB226_USER_LED2;
- }
- break;
+ GPCR0 |= CSB226_USER_LED2;
+ } else if (state==0) {
+ GPSR0 |= CSB226_USER_LED2;
+ }
+ break;
}
return;
/**
* show_boot_progress: - indicate state of the boot process
*
- * @param status: Status number - see README for details.
+ * @param status: Status number - see README for details.
*
- * The CSB226 does only have 3 LEDs, so we switch them on at the most
- * important states (1, 5, 15).
+ * The CSB226 does only have 3 LEDs, so we switch them on at the most
+ * important states (1, 5, 15).
*/
void show_boot_progress (int status)
return;
}
-