env: Rename getenv/_f() to env_get()

[platform/kernel/u-boot.git] / board / congatec / cgtqmx6eval / cgtqmx6eval.c

diff --git a/board/congatec/cgtqmx6eval/cgtqmx6eval.c b/board/congatec/cgtqmx6eval/cgtqmx6eval.c
index 225de7c..8cd0090 100644 (file)
--- a/board/congatec/cgtqmx6eval/cgtqmx6eval.c
+++ b/board/congatec/cgtqmx6eval/cgtqmx6eval.c
@@ -14,10 +14,10 @@
 #include <asm/arch/iomux.h>
 #include <asm/arch/mx6-pins.h>
 #include <asm/gpio.h>
-#include <asm/imx-common/iomux-v3.h>
-#include <asm/imx-common/sata.h>
-#include <asm/imx-common/boot_mode.h>
-#include <asm/imx-common/mxc_i2c.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/sata.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/mxc_i2c.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
@@ -71,6 +71,7 @@ static iomux_v3_cfg_t const uart2_pads[] = {
        IOMUX_PADS(PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
 };
 
+#ifndef CONFIG_SPL_BUILD
 static iomux_v3_cfg_t const usdhc2_pads[] = {
        IOMUX_PADS(PAD_SD2_CLK__SD2_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
        IOMUX_PADS(PAD_SD2_CMD__SD2_CMD   | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
@@ -94,6 +95,7 @@ static iomux_v3_cfg_t const usdhc3_pads[] = {
        IOMUX_PADS(PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
        IOMUX_PADS(PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 };
+#endif
 
 static iomux_v3_cfg_t const usdhc4_pads[] = {
        IOMUX_PADS(PAD_SD4_CLK__SD4_CLK   | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
@@ -233,7 +235,7 @@ int power_init_board(void)
                return 0;
 
        /* set level of MIPI if specified */
-       lv_mipi = getenv("lv_mipi");
+       lv_mipi = env_get("lv_mipi");
        if (lv_mipi)
                return 0;
 
@@ -581,7 +583,7 @@ int board_video_skip(void)
 {
        int i;
        int ret;
-       char const *panel = getenv("panel");
+       char const *panel = env_get("panel");
        if (!panel) {
                for (i = 0; i < ARRAY_SIZE(displays); i++) {
                        struct display_info_t const *dev = displays + i;
@@ -678,14 +680,6 @@ int overwrite_console(void)
        return 1;
 }
 
-static bool is_mx6q(void)
-{
-       if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
-               return true;
-       else
-               return false;
-}
-
 int board_early_init_f(void)
 {
        setup_iomux_uart();
@@ -703,12 +697,12 @@ int board_init(void)
        gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
 
-       if (is_mx6q())
+       if (is_mx6dq())
                setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6q_i2c_pad_info1);
        else
                setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &mx6dl_i2c_pad_info1);
 
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
        setup_sata();
 #endif
 
@@ -760,10 +754,10 @@ int misc_init_r(void)
 int board_late_init(void)
 {
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
-       if (is_mx6q())
-               setenv("board_rev", "MX6Q");
+       if (is_mx6dq())
+               env_set("board_rev", "MX6Q");
        else
-               setenv("board_rev", "MX6DL");
+               env_set("board_rev", "MX6DL");
 #endif
 
        return 0;
@@ -1045,6 +1039,8 @@ static void spl_dram_init(int width)
                .bi_on = 1,
                .sde_to_rst = 0x0d,
                .rst_to_cke = 0x20,
+               .refsel = 1,    /* Refresh cycles at 32KHz */
+               .refr = 7,      /* 8 refresh commands per refresh cycle */
        };
 
        if (is_cpu_type(MXC_CPU_MX6Q) && is_2gb()) {
@@ -1053,7 +1049,7 @@ static void spl_dram_init(int width)
                return;
        }
 
-       if (is_mx6q()) {
+       if (is_mx6dq()) {
                mx6dq_dram_iocfg(width, &mx6q_ddr_ioregs, &mx6q_grp_ioregs);
                mx6_dram_cfg(&sysinfo, &mx6q_mmcd_calib, &mem_ddr_2g);
        } else if (is_cpu_type(MXC_CPU_MX6SOLO)) {