status_led: Kconfig migration

[platform/kernel/u-boot.git] / board / compulab / cm_t3517 / cm_t3517.c

diff --git a/board/compulab/cm_t3517/cm_t3517.c b/board/compulab/cm_t3517/cm_t3517.c
index 6abecc2..50312b1 100644 (file)
--- a/board/compulab/cm_t3517/cm_t3517.c
+++ b/board/compulab/cm_t3517/cm_t3517.c
@@ -8,6 +8,8 @@
 
 #include <common.h>
 #include <status_led.h>
+#include <net.h>
+#include <netdev.h>
 #include <usb.h>
 #include <mmc.h>
 #include <linux/compiler.h>
@@ -23,6 +25,7 @@
 #include <asm/ehci-omap.h>
 
 #include "../common/common.h"
+#include "../common/eeprom.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -47,12 +50,12 @@ static struct omap_musb_board_data cm_t3517_musb_board_data = {
 };
 
 static struct musb_hdrc_platform_data cm_t3517_musb_pdata = {
-#if defined(CONFIG_MUSB_HOST)
+#if defined(CONFIG_USB_MUSB_HOST)
        .mode           = MUSB_HOST,
-#elif defined(CONFIG_MUSB_GADGET)
+#elif defined(CONFIG_USB_MUSB_GADGET)
        .mode           = MUSB_PERIPHERAL,
 #else
-#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET"
 #endif
        .config         = &cm_t3517_musb_config,
        .power          = 250,
@@ -86,8 +89,8 @@ int board_init(void)
        /* boot param addr */
        gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
 
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
-       status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
+       status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
 #endif
 
        cm_t3517_musb_init();
@@ -95,10 +98,19 @@ int board_init(void)
        return 0;
 }
 
+/*
+ * Routine: get_board_rev
+ * Description: read system revision
+ */
+u32 get_board_rev(void)
+{
+       return cl_eeprom_get_board_rev(CONFIG_SYS_I2C_EEPROM_BUS);
+};
+
 int misc_init_r(void)
 {
        cl_print_pcb_info();
-       dieid_num_r();
+       omap_die_id_display();
 
        return 0;
 }
@@ -113,6 +125,92 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
+#ifdef CONFIG_DRIVER_TI_EMAC
+#define CONTROL_EFUSE_EMAC_LSB  0x48002380
+#define CONTROL_EFUSE_EMAC_MSB  0x48002384
+
+static int am3517_get_efuse_enetaddr(u8 *enetaddr)
+{
+       u32 lsb = __raw_readl(CONTROL_EFUSE_EMAC_LSB);
+       u32 msb = __raw_readl(CONTROL_EFUSE_EMAC_MSB);
+
+       enetaddr[0] = (u8)((msb >> 16) & 0xff);
+       enetaddr[1] = (u8)((msb >> 8)  & 0xff);
+       enetaddr[2] = (u8)(msb & 0xff);
+       enetaddr[3] = (u8)((lsb >> 16) & 0xff);
+       enetaddr[4] = (u8)((lsb >> 8)  & 0xff);
+       enetaddr[5] = (u8)(lsb & 0xff);
+
+       return is_valid_ethaddr(enetaddr);
+}
+
+static inline int cm_t3517_init_emac(bd_t *bis)
+{
+       int ret = cpu_eth_init(bis);
+
+       if (ret > 0)
+               return ret;
+
+       printf("Failed initializing EMAC! ");
+       return 0;
+}
+#else /* !CONFIG_DRIVER_TI_EMAC */
+static inline int am3517_get_efuse_enetaddr(u8 *enetaddr) { return 1; }
+static inline int cm_t3517_init_emac(bd_t *bis) { return 0; }
+#endif /* CONFIG_DRIVER_TI_EMAC */
+
+/*
+ * Routine: handle_mac_address
+ * Description: prepare MAC address for on-board Ethernet.
+ */
+static int cm_t3517_handle_mac_address(void)
+{
+       unsigned char enetaddr[6];
+       int ret;
+
+       ret = eth_getenv_enetaddr("ethaddr", enetaddr);
+       if (ret)
+               return 0;
+
+       ret = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
+       if (ret) {
+               ret = am3517_get_efuse_enetaddr(enetaddr);
+               if (ret)
+                       return ret;
+       }
+
+       if (!is_valid_ethaddr(enetaddr))
+               return -1;
+
+       return eth_setenv_enetaddr("ethaddr", enetaddr);
+}
+
+#define SB_T35_ETH_RST_GPIO 164
+
+/*
+ * Routine: board_eth_init
+ * Description: initialize module and base-board Ethernet chips
+ */
+int board_eth_init(bd_t *bis)
+{
+       int rc = 0, rc1 = 0;
+
+       rc1 = cm_t3517_handle_mac_address();
+       if (rc1)
+               printf("No MAC address found! ");
+
+       rc1 = cm_t3517_init_emac(bis);
+       if (rc1 > 0)
+               rc++;
+
+       rc1 = cl_omap3_smc911x_init(0, 4, CONFIG_SMC911X_BASE,
+                                   NULL, SB_T35_ETH_RST_GPIO);
+       if (rc1 > 0)
+               rc++;
+
+       return rc;
+}
+
 #ifdef CONFIG_USB_EHCI_OMAP
 static struct omap_usbhs_board_data cm_t3517_usbhs_bdata = {
        .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,