* - run-time SDRAM controller configuration
* - LIBFDT support
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#ifdef CONFIG_OF_LIBFDT
#include <libfdt.h>
-#include <libfdt_env.h>
#include <fdt_support.h>
#endif /* CONFIG_OF_LIBFDT */
/*
* Initalize SDRAM - configure SDRAM controller, detect memory size.
*/
-phys_size_t initdram(int board_type)
+int dram_init(void)
{
ulong dramsize = 0;
#ifndef CONFIG_SYS_RAMBOOT
ulong test1, test2;
mem_conf_t *mem_conf;
- mem_conf = get_mem_config(board_type);
+ mem_conf = get_mem_config(gd->board_type);
/* configure SDRAM start/end for detection */
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
__asm__ volatile ("sync");
- return dramsize;
+ gd->ram_size = dramsize;
+
+ return 0;
}
*/
static void read_hw_id(hw_id_t hw_id)
{
- int i;
- for (i = 0; i < HW_ID_ELEM_COUNT; ++i)
- if (i2c_read(CONFIG_SYS_I2C_EEPROM,
- hw_id_format[i].offset,
- 2,
- (uchar *)&hw_id[i][0],
- hw_id_format[i].length) != 0)
- printf("ERROR: can't read HW ID from EEPROM\n");
+ printf("ERROR: can't read HW ID from EEPROM\n");
}
strcat(buf, tmp);
}
-
+#if defined(CONFIG_SYS_I2C_SOFT)
/*
* Compose string with hostname.
* buf is assumed to have enough space, and be null-terminated.
*p = tolower(*p);
}
+#endif
-
-#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+#ifdef CONFIG_OF_BOARD_SETUP
/*
* Update 'model' and 'memory' properties in the blob according to the module
* that we are running on.
printf("ft_blob_update(): cannot set /model property err:%s\n",
fdt_strerror(ret));
}
-#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
+#endif /* CONFIG_OF_BOARD_SETUP */
/*
hw_id_t hw_id_tmp;
char module_name_tmp[MODULE_NAME_MAXLEN] = "";
- /*
- * We need I2C to access HW ID data from EEPROM, so we call i2c_init()
- * here despite the fact that it will be called again later on. We
- * also use a little trick to silence I2C-related output.
- */
- gd->flags |= GD_FLG_SILENT;
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- gd->flags &= ~GD_FLG_SILENT;
-
read_hw_id(hw_id_tmp);
identify_module(hw_id_tmp); /* this sets gd->board_type */
compose_module_name(hw_id_tmp, module_name_tmp);
#ifdef CONFIG_MISC_INIT_R
int misc_init_r(void)
{
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
uchar buf[6];
char str[18];
char hostname[MODULE_NAME_MAXLEN];
" device at address %02X:%04X\n", CONFIG_SYS_I2C_EEPROM,
CONFIG_MAC_OFFSET);
}
-#endif /* defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C) */
- if (!getenv("ethaddr"))
- printf(LOG_PREFIX "MAC address not set, networking is not "
- "operational\n");
-
- /* set the hostname appropriate to the module we're running on */
hostname[0] = 0x00;
+ /* set the hostname appropriate to the module we're running on */
compose_hostname(hw_id, hostname);
setenv("hostname", hostname);
+#endif /* defined(CONFIG_SYS_I2C_SOFT) */
+ if (!getenv("ethaddr"))
+ printf(LOG_PREFIX "MAC address not set, networking is not "
+ "operational\n");
+
return 0;
}
#endif /* CONFIG_MISC_INIT_R */
#endif /* CONFIG_LAST_STAGE_INIT */
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+#ifdef CONFIG_OF_BOARD_SETUP
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
ft_blob_update(blob, bd);
+
+ return 0;
}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+#endif /* CONFIG_OF_BOARD_SETUP */