imx: Convert some boards to DM_ETH

[platform/kernel/u-boot.git] / board / boundary / nitrogen6x / nitrogen6x.c

diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c
index 92a7a2f..8566c22 100644 (file)
--- a/board/boundary/nitrogen6x/nitrogen6x.c
+++ b/board/boundary/nitrogen6x/nitrogen6x.c
@@ -9,6 +9,7 @@
 #include <env.h>
 #include <init.h>
 #include <net.h>
+#include <asm/global_data.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
@@ -16,6 +17,7 @@
 #include <asm/arch/sys_proto.h>
 #include <malloc.h>
 #include <asm/arch/mx6-pins.h>
+#include <linux/delay.h>
 #include <linux/errno.h>
 #include <asm/gpio.h>
 #include <asm/mach-imx/iomux-v3.h>
@@ -24,7 +26,6 @@
 #include <asm/mach-imx/spi.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/video.h>
-#include <mmc.h>
 #include <fsl_esdhc_imx.h>
 #include <micrel.h>
 #include <miiphy.h>
@@ -160,26 +161,6 @@ static iomux_v3_cfg_t const usdhc2_pads[] = {
        IOMUX_PAD_CTRL(SD2_DAT3__SD2_DATA3, USDHC_PAD_CTRL),
 };
 
-static iomux_v3_cfg_t const usdhc3_pads[] = {
-       IOMUX_PAD_CTRL(SD3_CLK__SD3_CLK, USDHC_PAD_CTRL),
-       IOMUX_PAD_CTRL(SD3_CMD__SD3_CMD, USDHC_PAD_CTRL),
-       IOMUX_PAD_CTRL(SD3_DAT0__SD3_DATA0, USDHC_PAD_CTRL),
-       IOMUX_PAD_CTRL(SD3_DAT1__SD3_DATA1, USDHC_PAD_CTRL),
-       IOMUX_PAD_CTRL(SD3_DAT2__SD3_DATA2, USDHC_PAD_CTRL),
-       IOMUX_PAD_CTRL(SD3_DAT3__SD3_DATA3, USDHC_PAD_CTRL),
-       IOMUX_PAD_CTRL(SD3_DAT5__GPIO7_IO00, NO_PAD_CTRL), /* CD */
-};
-
-static iomux_v3_cfg_t const usdhc4_pads[] = {
-       IOMUX_PAD_CTRL(SD4_CLK__SD4_CLK, USDHC_PAD_CTRL),
-       IOMUX_PAD_CTRL(SD4_CMD__SD4_CMD, USDHC_PAD_CTRL),
-       IOMUX_PAD_CTRL(SD4_DAT0__SD4_DATA0, USDHC_PAD_CTRL),
-       IOMUX_PAD_CTRL(SD4_DAT1__SD4_DATA1, USDHC_PAD_CTRL),
-       IOMUX_PAD_CTRL(SD4_DAT2__SD4_DATA2, USDHC_PAD_CTRL),
-       IOMUX_PAD_CTRL(SD4_DAT3__SD4_DATA3, USDHC_PAD_CTRL),
-       IOMUX_PAD_CTRL(NANDF_D6__GPIO2_IO06, NO_PAD_CTRL), /* CD */
-};
-
 static iomux_v3_cfg_t const enet_pads1[] = {
        IOMUX_PAD_CTRL(ENET_MDIO__ENET_MDIO, ENET_PAD_CTRL),
        IOMUX_PAD_CTRL(ENET_MDC__ENET_MDC, ENET_PAD_CTRL),
@@ -304,57 +285,6 @@ int board_ehci_power(int port, int on)
 
 #endif
 
-#ifdef CONFIG_FSL_ESDHC_IMX
-static struct fsl_esdhc_cfg usdhc_cfg[2] = {
-       {USDHC3_BASE_ADDR},
-       {USDHC4_BASE_ADDR},
-};
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-       struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-       int gp_cd = (cfg->esdhc_base == USDHC3_BASE_ADDR) ? IMX_GPIO_NR(7, 0) :
-                       IMX_GPIO_NR(2, 6);
-
-       gpio_direction_input(gp_cd);
-       return !gpio_get_value(gp_cd);
-}
-
-int board_mmc_init(bd_t *bis)
-{
-       int ret;
-       u32 index = 0;
-
-       usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-       usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
-
-       usdhc_cfg[0].max_bus_width = 4;
-       usdhc_cfg[1].max_bus_width = 4;
-
-       for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
-               switch (index) {
-               case 0:
-                       SETUP_IOMUX_PADS(usdhc3_pads);
-                       break;
-               case 1:
-                      SETUP_IOMUX_PADS(usdhc4_pads);
-                      break;
-               default:
-                      printf("Warning: you configured more USDHC controllers"
-                              "(%d) then supported by the board (%d)\n",
-                              index + 1, CONFIG_SYS_FSL_USDHC_NUM);
-                      return -EINVAL;
-               }
-
-               ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
-               if (ret)
-                       return ret;
-       }
-
-       return 0;
-}
-#endif
-
 #ifdef CONFIG_MXC_SPI
 int board_spi_cs_gpio(unsigned bus, unsigned cs)
 {
@@ -392,7 +322,7 @@ int board_phy_config(struct phy_device *phydev)
        return 0;
 }
 
-int board_eth_init(bd_t *bis)
+int board_eth_init(struct bd_info *bis)
 {
        uint32_t base = IMX_FEC_BASE;
        struct mii_dev *bus = NULL;
@@ -426,10 +356,6 @@ int board_eth_init(bd_t *bis)
                goto free_phydev;
 #endif
 
-#ifdef CONFIG_CI_UDC
-       /* For otg ethernet*/
-       usb_eth_initialize(bis);
-#endif
        return 0;
 
 free_phydev: