* UIC2 UIC1
* UIC3 UIC2
*/
- mtdcr (uic1sr, 0xffffffff); /* clear all */
- mtdcr (uic1er, 0x00000000); /* disable all */
- mtdcr (uic1cr, 0x00000009); /* SMI & UIC1 crit are critical */
- mtdcr (uic1pr, 0xfffffe13); /* per ref-board manual */
- mtdcr (uic1tr, 0x01c00008); /* per ref-board manual */
- mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
-
- mtdcr (uic2sr, 0xffffffff); /* clear all */
- mtdcr (uic2er, 0x00000000); /* disable all */
- mtdcr (uic2cr, 0x00000000); /* all non-critical */
- mtdcr (uic2pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr (uic2tr, 0x00ffc000); /* per ref-board manual */
- mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic2sr, 0xffffffff); /* clear all */
-
- mtdcr (uic3sr, 0xffffffff); /* clear all */
- mtdcr (uic3er, 0x00000000); /* disable all */
- mtdcr (uic3cr, 0x00000000); /* all non-critical */
- mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */
- mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */
- mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic3sr, 0xffffffff); /* clear all */
-
- mtdcr (uic0sr, 0xfc000000); /* clear all */
- mtdcr (uic0er, 0x00000000); /* disable all */
- mtdcr (uic0cr, 0x00000000); /* all non-critical */
- mtdcr (uic0pr, 0xfc000000); /* */
- mtdcr (uic0tr, 0x00000000); /* */
- mtdcr (uic0vr, 0x00000001); /* */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+ mtdcr (UIC1ER, 0x00000000); /* disable all */
+ mtdcr (UIC1CR, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr (UIC1PR, 0xfffffe13); /* per ref-board manual */
+ mtdcr (UIC1TR, 0x01c00008); /* per ref-board manual */
+ mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC1SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+ mtdcr (UIC2ER, 0x00000000); /* disable all */
+ mtdcr (UIC2CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC2PR, 0xffffe0ff); /* per ref-board manual */
+ mtdcr (UIC2TR, 0x00ffc000); /* per ref-board manual */
+ mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC2SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+ mtdcr (UIC3ER, 0x00000000); /* disable all */
+ mtdcr (UIC3CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC3PR, 0xffffffff); /* per ref-board manual */
+ mtdcr (UIC3TR, 0x00ff8c0f); /* per ref-board manual */
+ mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr (UIC3SR, 0xffffffff); /* clear all */
+
+ mtdcr (UIC0SR, 0xfc000000); /* clear all */
+ mtdcr (UIC0ER, 0x00000000); /* disable all */
+ mtdcr (UIC0CR, 0x00000000); /* all non-critical */
+ mtdcr (UIC0PR, 0xfc000000); /* */
+ mtdcr (UIC0TR, 0x00000000); /* */
+ mtdcr (UIC0VR, 0x00000001); /* */
/* Enable two GPIO 10~11 and TraceA signal */
mfsdr(SDR0_PFC0,reg);
}
#endif /* defined(CONFIG_PCI) */
-/*************************************************************************
- * pci_target_init
- *
- * The bootstrap configuration provides default settings for the pci
- * inbound map (PIM). But the bootstrap config choices are limited and
- * may not be sufficient for a given board.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose )
-{
- /*--------------------------------------------------------------------------+
- * Disable everything
- *--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0SA, 0 ); /* disable */
- out32r( PCIX0_PIM1SA, 0 ); /* disable */
- out32r( PCIX0_PIM2SA, 0 ); /* disable */
- out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
-
- /*--------------------------------------------------------------------------+
- * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
- * options to not support sizes such as 128/256 MB.
- *--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
- out32r( PCIX0_PIM0LAH, 0 );
- out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
-
- out32r( PCIX0_BAR0, 0 );
-
- /*--------------------------------------------------------------------------+
- * Program the board's subsystem id/vendor id
- *--------------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
-
- out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
-}
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
-
-/*************************************************************************
- * is_pci_host
- *
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
- *
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
- /* The ocotea board is always configured as host. */
- return(1);
-}
-#endif /* defined(CONFIG_PCI) */
-
#ifdef CONFIG_POST
/*
* Returns 1 if keys pressed to start the power-on long-running tests
projects / platform / kernel / u-boot.git / blobdiff