Merge branch 'master' of /home/stefan/git/u-boot/u-boot into next

[platform/kernel/u-boot.git] / board / amcc / sequoia / sequoia.c

diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
index 5ff9787..176d5cf 100644 (file)
--- a/board/amcc/sequoia/sequoia.c
+++ b/board/amcc/sequoia/sequoia.c
@@ -25,12 +25,11 @@
 #include <common.h>
 #include <libfdt.h>
 #include <fdt_support.h>
-#include <ppc440.h>
+#include <ppc4xx.h>
 #include <asm/gpio.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/bitops.h>
-#include <asm/ppc4xx-intvec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -93,6 +92,11 @@ int board_early_init_f(void)
 #ifdef CONFIG_I2C_MULTI_BUS
        sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL);
 #endif
+       /* Two UARTs, so we need 4-pin mode.  Also, we want CTS/RTS mode. */
+       sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0IM_MASK) | SDR0_PFC1_U0IM_4PINS;
+       sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U0ME_MASK) | SDR0_PFC1_U0ME_CTS_RTS;
+       sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_U1ME_MASK) | SDR0_PFC1_U1ME_CTS_RTS;
+
        mfsdr(SDR0_PFC2, sdr0_pfc2);
        sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
                SDR0_PFC2_SELECT_CONFIG_4;
@@ -335,7 +339,7 @@ int checkboard(void)
  */
 void sequoia_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
 {
-       pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIR2);
+       pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2);
 }
 #endif
 
@@ -509,24 +513,3 @@ int post_hotkeys_pressed(void)
        return 0;       /* No hotkeys supported */
 }
 #endif /* CONFIG_POST */
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
-       u32 val[4];
-       int rc;
-
-       ft_cpu_setup(blob, bd);
-
-       /* Fixup NOR mapping */
-       val[0] = 0;                             /* chip select number */
-       val[1] = 0;                             /* always 0 */
-       val[2] = gd->bd->bi_flashstart;
-       val[3] = gd->bd->bi_flashsize;
-       rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
-                                 val, sizeof(val), 1);
-       if (rc)
-               printf("Unable to update property NOR mapping, err=%s\n",
-                      fdt_strerror(rc));
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */