Merge 'next' branch
[platform/kernel/u-boot.git] / board / amcc / kilauea / kilauea.c
index 2ee896a..7e84a61 100644 (file)
@@ -36,7 +36,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips   */
+extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips    */
 
 /*
  * Board early initialization function
@@ -192,19 +192,12 @@ int board_early_init_f (void)
         */
        mtsdr(SDR0_SRST, 0);
 
-       /*
-        * Configure FPGA register with PCIe reset
-        */
-       out_be32((void *)CFG_FPGA_BASE, 0xff570cc0);    /* assert PCIe reset */
-       mdelay(50);
-       out_be32((void *)CFG_FPGA_BASE, 0xff570cc3);    /* deassert PCIe reset */
-
        /* Configure 405EX for NAND usage */
        val = SDR0_CUST0_MUX_NDFC_SEL |
                SDR0_CUST0_NDFC_ENABLE |
                SDR0_CUST0_NDFC_BW_8_BIT |
                SDR0_CUST0_NRB_BUSY |
-               (0x80000000 >> (28 + CFG_NAND_CS));
+               (0x80000000 >> (28 + CONFIG_SYS_NAND_CS));
        mtsdr(SDR0_CUST0, val);
 
        /*
@@ -214,15 +207,22 @@ int board_early_init_f (void)
        val = SDR0_PFC1_USBEN | SDR0_PFC1_USBBIGEN | SDR0_PFC1_GPT_FREQ;
        mtsdr(SDR0_PFC1, val);
 
+       /*
+        * Configure FPGA register with PCIe reset
+        */
+       out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc4);     /* assert PCIe reset */
+       mdelay(50);
+       out_be32((void *)CONFIG_SYS_FPGA_BASE, 0xff570cc7);     /* deassert PCIe reset */
+
        return 0;
 }
 
 int misc_init_r(void)
 {
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
        /* Monitor protection ON by default */
        flash_protect(FLAG_PROTECT_SET,
-                     -CFG_MONITOR_LEN,
+                     -CONFIG_SYS_MONITOR_LEN,
                      0xffffffff,
                      &flash_info[0]);
 #endif
@@ -230,14 +230,22 @@ int misc_init_r(void)
        return 0;
 }
 
-int board_emac_count(void)
+static int is_405exr(void)
 {
        u32 pvr = get_pvr();
 
+       if (pvr & 0x00000004)
+               return 0;               /* bit 2 set -> 405EX */
+
+       return 1;                       /* bit 2 cleared -> 405EXr */
+}
+
+int board_emac_count(void)
+{
        /*
         * 405EXr only has one EMAC interface, 405EX has two
         */
-       if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+       if (is_405exr())
                return 1;
        else
                return 2;
@@ -245,12 +253,10 @@ int board_emac_count(void)
 
 static int board_pcie_count(void)
 {
-       u32 pvr = get_pvr();
-
        /*
         * 405EXr only has one EMAC interface, 405EX has two
         */
-       if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+       if (is_405exr())
                return 1;
        else
                return 2;
@@ -259,9 +265,8 @@ static int board_pcie_count(void)
 int checkboard (void)
 {
        char *s = getenv("serial#");
-       u32 pvr = get_pvr();
 
-       if ((pvr == PVR_405EXR1_RA) || (pvr == PVR_405EXR2_RA))
+       if (is_405exr())
                printf("Board: Haleakala - AMCC PPC405EXr Evaluation Board");
        else
                printf("Board: Kilauea - AMCC PPC405EX Evaluation Board");
@@ -325,35 +330,35 @@ void pcie_setup_hoses(int busno)
 
                /* setup mem resource */
                pci_set_region(hose->regions + 0,
-                              CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
-                              CFG_PCIE_MEMBASE + i * CFG_PCIE_MEMSIZE,
-                              CFG_PCIE_MEMSIZE,
+                              CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+                              CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
+                              CONFIG_SYS_PCIE_MEMSIZE,
                               PCI_REGION_MEM);
                hose->region_count = 1;
                pci_register_hose(hose);
 
                if (is_end_point(i)) {
-                       ppc4xx_setup_pcie_endpoint(hose, i);
+                       ppc4xx_setup_pcie_endpoint(hose, i);
                        /*
                         * Reson for no scanning is endpoint can not generate
                         * upstream configuration accesses.
-                        */
+                        */
                } else {
-                       ppc4xx_setup_pcie_rootpoint(hose, i);
+                       ppc4xx_setup_pcie_rootpoint(hose, i);
                        env = getenv ("pciscandelay");
-                       if (env != NULL) {
-                               delay = simple_strtoul(env, NULL, 10);
+                       if (env != NULL) {
+                               delay = simple_strtoul(env, NULL, 10);
                                if (delay > 5)
-                                       printf("Warning, expect noticable delay before "
+                                       printf("Warning, expect noticable delay before "
                                               "PCIe scan due to 'pciscandelay' value!\n");
                                mdelay(delay * 1000);
                        }
 
-                       /*
-                        * Config access can only go down stream
-                        */
-                       hose->last_busno = pci_hose_scan(hose);
-                       bus = hose->last_busno + 1;
+                       /*
+                        * Config access can only go down stream
+                        */
+                       hose->last_busno = pci_hose_scan(hose);
+                       bus = hose->last_busno + 1;
                }
        }
 }
@@ -369,24 +374,3 @@ int post_hotkeys_pressed(void)
        return 0;       /* No hotkeys supported */
 }
 #endif /* CONFIG_POST */
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
-{
-       u32 val[4];
-       int rc;
-
-       ft_cpu_setup(blob, bd);
-
-       /* Fixup NOR mapping */
-       val[0] = 0;                             /* chip select number */
-       val[1] = 0;                             /* always 0 */
-       val[2] = gd->bd->bi_flashstart;
-       val[3] = gd->bd->bi_flashsize;
-       rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges",
-                                 val, sizeof(val), 1);
-       if (rc)
-               printf("Unable to update property NOR mapping, err=%s\n",
-                      fdt_strerror(rc));
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */