ppc4xx: Remove implementations of testdram()

[platform/kernel/u-boot.git] / board / amcc / katmai / katmai.c

diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c
index 25c9a22..3a0b18f 100644 (file)
--- a/board/amcc/katmai/katmai.c
+++ b/board/amcc/katmai/katmai.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007
+ * (C) Copyright 2007-2008
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -246,35 +246,17 @@ int checkboard (void)
        return 0;
 }
 
-#if defined(CFG_DRAM_TEST)
-int testdram (void)
-{
-       uint *pstart = (uint *) 0x00000000;
-       uint *pend = (uint *) 0x08000000;
-       uint *p;
-
-       for (p = pstart; p < pend; p++)
-               *p = 0xaaaaaaaa;
-
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0xaaaaaaaa) {
-                       printf ("SDRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-
-       for (p = pstart; p < pend; p++)
-               *p = 0x55555555;
+/*
+ * Override the default functions in cpu/ppc4xx/44x_spd_ddr2.c with
+ * board specific values.
+ */
+u32 ddr_wrdtr(u32 default_val) {
+       return (SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_180_DEG_ADV | 0x823);
+}
 
-       for (p = pstart; p < pend; p++) {
-               if (*p != 0x55555555) {
-                       printf ("SDRAM test fails at: %08x\n", (uint) p);
-                       return 1;
-               }
-       }
-       return 0;
+u32 ddr_clktr(u32 default_val) {
+       return (SDRAM_CLKTR_CLKP_90_DEG_ADV);
 }
-#endif
 
 /*************************************************************************
  *  pci_pre_init
@@ -429,27 +411,27 @@ void pcie_setup_hoses(int busno)
                pci_register_hose(hose);
 
                if (is_end_point(i)) {
-                       ppc4xx_setup_pcie_endpoint(hose, i);
+                       ppc4xx_setup_pcie_endpoint(hose, i);
                        /*
                         * Reson for no scanning is endpoint can not generate
                         * upstream configuration accesses.
-                        */
+                        */
                } else {
-                       ppc4xx_setup_pcie_rootpoint(hose, i);
+                       ppc4xx_setup_pcie_rootpoint(hose, i);
                        env = getenv ("pciscandelay");
-                       if (env != NULL) {
-                               delay = simple_strtoul(env, NULL, 10);
+                       if (env != NULL) {
+                               delay = simple_strtoul(env, NULL, 10);
                                if (delay > 5)
-                                       printf("Warning, expect noticable delay before "
+                                       printf("Warning, expect noticable delay before "
                                               "PCIe scan due to 'pciscandelay' value!\n");
                                mdelay(delay * 1000);
                        }
 
-                       /*
-                        * Config access can only go down stream
-                        */
-                       hose->last_busno = pci_hose_scan(hose);
-                       bus = hose->last_busno + 1;
+                       /*
+                        * Config access can only go down stream
+                        */
+                       hose->last_busno = pci_hose_scan(hose);
+                       bus = hose->last_busno + 1;
                }
        }
 }