*
* common board functions for B&R boards
*
- * Copyright (C) 2013 Hannes Petermaier <oe5hpm@oevsv.at>
+ * Copyright (C) 2013 Hannes Schmelzer <oe5hpm@oevsv.at>
* Bernecker & Rainer Industrieelektronik GmbH - http://www.br-automation.com
*
* SPDX-License-Identifier: GPL-2.0+
#include <version.h>
#include <common.h>
#include <errno.h>
-#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
#include <asm/arch/omap.h>
#include "bur_common.h"
#include "../../../drivers/video/am335x-fb.h"
#include <nand.h>
+#include <fdt_simplefb.h>
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
/* --------------------------------------------------------------------------*/
#if defined(CONFIG_LCD) && defined(CONFIG_AM335X_LCD) && \
!defined(CONFIG_SPL_BUILD)
+void lcdbacklight(int on)
+{
+#ifdef CONFIG_USE_FDT
+ if (gd->fdt_blob == NULL) {
+ printf("%s: don't have a valid gd->fdt_blob!\n", __func__);
+ return;
+ }
+ unsigned int driver = FDTPROP(PATHINF, "brightdrv");
+ unsigned int bright = FDTPROP(PATHINF, "brightdef");
+ unsigned int pwmfrq = FDTPROP(PATHINF, "brightfdim");
+#else
+ unsigned int driver = getenv_ulong("ds1_bright_drv", 16, 0UL);
+ unsigned int bright = getenv_ulong("ds1_bright_def", 10, 50);
+ unsigned int pwmfrq = getenv_ulong("ds1_pwmfreq", 10, ~0UL);
+#endif
+ unsigned int tmp;
+ struct gptimer *timerhw;
+
+ if (on)
+ bright = bright != ~0UL ? bright : 50;
+ else
+ bright = 0;
+
+ switch (driver) {
+ case 2:
+ timerhw = (struct gptimer *)DM_TIMER5_BASE;
+ break;
+ default:
+ timerhw = (struct gptimer *)DM_TIMER6_BASE;
+ }
+
+ switch (driver) {
+ case 0: /* PMIC LED-Driver */
+ /* brightness level */
+ tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
+ TPS65217_WLEDCTRL2, bright, 0xFF);
+ /* current sink */
+ tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
+ TPS65217_WLEDCTRL1,
+ bright != 0 ? 0x0A : 0x02,
+ 0xFF);
+ break;
+ case 1:
+ case 2: /* PWM using timer */
+ if (pwmfrq != ~0UL) {
+ timerhw->tiocp_cfg = TCFG_RESET;
+ udelay(10);
+ while (timerhw->tiocp_cfg & TCFG_RESET)
+ ;
+ tmp = ~0UL-(V_OSCK/pwmfrq); /* bottom value */
+ timerhw->tldr = tmp;
+ timerhw->tcrr = tmp;
+ tmp = tmp + ((V_OSCK/pwmfrq)/100) * bright;
+ timerhw->tmar = tmp;
+ timerhw->tclr = (TCLR_PT | (2 << TCLR_TRG_SHIFT) |
+ TCLR_CE | TCLR_AR | TCLR_ST);
+ } else {
+ puts("invalid pwmfrq in env/dtb! skip PWM-setup.\n");
+ }
+ break;
+ default:
+ puts("no suitable backlightdriver in env/dtb!\n");
+ break;
+ }
+}
+
int load_lcdtiming(struct am335x_lcdpanel *panel)
{
struct am335x_lcdpanel pnltmp;
#ifdef CONFIG_USE_FDT
u32 dtbprop;
+ char buf[32];
+ const char *nodep = 0;
+ int nodeoff;
if (gd->fdt_blob == NULL) {
printf("%s: don't have a valid gd->fdt_blob!\n", __func__);
dtbprop = FDTPROP(PATHTIM, "de-active");
if (dtbprop == 0)
pnltmp.pol |= DE_INVERT;
+
+ nodeoff = fdt_path_offset(gd->fdt_blob, "/factory-settings");
+ if (nodeoff >= 0) {
+ nodep = fdt_getprop(gd->fdt_blob, nodeoff, "rotation", NULL);
+ if (nodep != 0) {
+ if (strcmp(nodep, "cw") == 0)
+ panel_info.vl_rot = 1;
+ else if (strcmp(nodep, "ud") == 0)
+ panel_info.vl_rot = 2;
+ else if (strcmp(nodep, "ccw") == 0)
+ panel_info.vl_rot = 3;
+ else
+ panel_info.vl_rot = 0;
+ }
+ } else {
+ puts("no 'factory-settings / rotation' in dtb!\n");
+ }
+ snprintf(buf, sizeof(buf), "fbcon=rotate:%d", panel_info.vl_rot);
+ setenv("optargs_rot", buf);
#else
pnltmp.hactive = getenv_ulong("ds1_hactive", 10, ~0UL);
pnltmp.vactive = getenv_ulong("ds1_vactive", 10, ~0UL);
pnltmp.pol = getenv_ulong("ds1_pol", 16, ~0UL);
pnltmp.pup_delay = getenv_ulong("ds1_pupdelay", 10, ~0UL);
pnltmp.pon_delay = getenv_ulong("ds1_tondelay", 10, ~0UL);
+ panel_info.vl_rot = getenv_ulong("ds1_rotation", 10, 0);
#endif
if (
~0UL == (pnltmp.hactive) ||
}
#ifdef CONFIG_NAND
dtbsize = 0x20000;
- rc = nand_read_skip_bad(&nand_info[0], 0x40000, (size_t *)&dtbsize,
+ rc = nand_read_skip_bad(nand_info[0], 0x40000, (size_t *)&dtbsize,
NULL, 0x20000, (u_char *)dtbaddr);
#else
char *dtbname = getenv("dtb");
char *dtbdev = getenv("dtbdev");
- char *dtppart = getenv("dtbpart");
- if (!dtbdev || !dtbdev || !dtbname) {
+ char *dtbpart = getenv("dtbpart");
+ if (!dtbdev || !dtbpart || !dtbname) {
printf("%s: <dtbdev>/<dtbpart>/<dtb> missing.\n", __func__);
return -1;
}
- if (fs_set_blk_dev(dtbdev, dtppart, FS_TYPE_EXT)) {
+ if (fs_set_blk_dev(dtbdev, dtbpart, FS_TYPE_EXT)) {
puts("load_devicetree: set_blk_dev failed.\n");
return -1;
}
puts("set bootloader version 'bl-version' prop. not in dtb!\n");
return -1;
}
+ /*
+ * if no simplefb is requested through environment, we don't set up
+ * one, instead we turn off backlight.
+ */
+ if (getenv_ulong("simplefb", 10, 0) == 0) {
+ lcdbacklight(0);
+ return 0;
+ }
+ /* Setup simplefb devicetree node, also adapt memory-node,
+ * upper limit for kernel e.g. linux is memtop-framebuffer alligned
+ * to a full megabyte.
+ */
+ u64 start = gd->bd->bi_dram[0].start;
+ u64 size = (gd->fb_base - start) & ~0xFFFFF;
+ int rc = fdt_fixup_memory_banks(blob, &start, &size, 1);
+
+ if (rc) {
+ puts("cannot setup simplefb: Error reserving memory!\n");
+ return rc;
+ }
+ rc = lcd_dt_simplefb_enable_existing_node(blob);
+ if (rc) {
+ puts("cannot setup simplefb: error enabling simplefb node!\n");
+ return rc;
+ }
+
return 0;
}
#else
void lcd_enable(void)
{
-#ifdef CONFIG_USE_FDT
- if (gd->fdt_blob == NULL) {
- printf("%s: don't have a valid gd->fdt_blob!\n", __func__);
- return;
- }
- unsigned int driver = FDTPROP(PATHINF, "brightdrv");
- unsigned int bright = FDTPROP(PATHINF, "brightdef");
- unsigned int pwmfrq = FDTPROP(PATHINF, "brightfdim");
-#else
- unsigned int driver = getenv_ulong("ds1_bright_drv", 16, 0UL);
- unsigned int bright = getenv_ulong("ds1_bright_def", 10, 50);
- unsigned int pwmfrq = getenv_ulong("ds1_pwmfreq", 10, ~0UL);
-#endif
- unsigned int tmp;
- struct gptimer *const timerhw = (struct gptimer *)DM_TIMER6_BASE;
-
- bright = bright != ~0UL ? bright : 50;
-
- switch (driver) {
- case 0: /* PMIC LED-Driver */
- /* brightness level */
- tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
- TPS65217_WLEDCTRL2, bright, 0xFF);
- /* turn on light */
- tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
- TPS65217_WLEDCTRL1, 0x0A, 0xFF);
- break;
- case 1: /* PWM using timer6 */
- if (pwmfrq != ~0UL) {
- timerhw->tiocp_cfg = TCFG_RESET;
- udelay(10);
- while (timerhw->tiocp_cfg & TCFG_RESET)
- ;
- tmp = ~0UL-(V_OSCK/pwmfrq); /* bottom value */
- timerhw->tldr = tmp;
- timerhw->tcrr = tmp;
- tmp = tmp + ((V_OSCK/pwmfrq)/100) * bright;
- timerhw->tmar = tmp;
- timerhw->tclr = (TCLR_PT | (2 << TCLR_TRG_SHIFT) |
- TCLR_CE | TCLR_AR | TCLR_ST);
- } else {
- puts("invalid pwmfrq in env/dtb! skip PWM-setup.\n");
- }
- break;
- default:
- puts("no suitable backlightdriver in env/dtb!\n");
- break;
- }
br_summaryscreen();
+ lcdbacklight(1);
}
#elif CONFIG_SPL_BUILD
#else
};
#endif /* CONFIG_DRIVER_TI_CPSW, ... */
-#if defined(CONFIG_DRIVER_TI_CPSW)
-
+#if defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)
int board_eth_init(bd_t *bis)
{
int rv = 0;
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
- (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
if (!getenv("ethaddr")) {
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USE_FDT)
printf("<ethaddr> not set. trying DTB ... ");
printf("Error %d registering CPSW switch\n", rv);
return 0;
}
-#endif /* CONFIG_DRIVER_TI_CPSW, ... */
return rv;
}
-#endif /* CONFIG_DRIVER_TI_CPSW */
-#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+#endif /* defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD) */
+#if defined(CONFIG_MMC)
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(1, 0, 0, -1, -1);
+ int rc = 0;
+
+ rc |= omap_mmc_init(0, 0, 0, -1, -1);
+ rc |= omap_mmc_init(1, 0, 0, -1, -1);
+
+ return rc;
}
#endif
int overwrite_console(void)
projects / platform / kernel / u-boot.git / blobdiff