@copying
@c man begin COPYRIGHT
-Copyright @copyright{} 1991-2018 Free Software Foundation, Inc.
+Copyright @copyright{} 1991-2019 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3
* c++filt: (binutils)c++filt. Filter to demangle encoded C++ symbols.
* cxxfilt: (binutils)c++filt. MS-DOS name for c++filt.
* dlltool: (binutils)dlltool. Create files needed to build and use DLLs.
-* nlmconv: (binutils)nlmconv. Converts object code into an NLM.
* nm: (binutils)nm. List symbols from object files.
* objcopy: (binutils)objcopy. Copy and translate object files.
* objdump: (binutils)objdump. Display information from object files.
* size: (binutils)size. List section sizes and total size.
* strings: (binutils)strings. List printable strings from files.
* strip: (binutils)strip. Discard symbols.
-* elfedit: (binutils)elfedit. Update the ELF header of ELF files.
+* elfedit: (binutils)elfedit. Update ELF header and property of ELF files.
* windmc: (binutils)windmc. Generator for Windows message resources.
* windres: (binutils)windres. Manipulate Windows resources.
@end direntry
Discard symbols
@item elfedit
-Update the ELF header of ELF files.
+Update the ELF header and program property of ELF files.
@item c++filt
Demangle encoded C++ symbols (on MS-DOS, this program is named
@item addr2line
Convert addresses into file names and line numbers
-@item nlmconv
-Convert object code into a Netware Loadable Module
-
@item windres
Manipulate Windows resources
* c++filt:: Filter to demangle encoded C++ symbols
* cxxfilt: c++filt. MS-DOS name for c++filt
* addr2line:: Convert addresses to file and line
-* nlmconv:: Converts object code into an NLM
* windmc:: Generator for Windows message resources
* windres:: Manipulate Windows resources
* dlltool:: Create files needed to build and use DLLs
* readelf:: Display the contents of ELF format files
-* elfedit:: Update the ELF header of ELF files
+* elfedit:: Update ELF header and property of ELF files
* Common Options:: Command-line options for all utilities
* Selecting the Target System:: How these utilities determine the target
* Reporting Bugs:: Reporting Bugs
@cindex contents of archive
Display a @emph{table} listing the contents of @var{archive}, or those
of the files listed in @var{member}@dots{} that are present in the
-archive. Normally only the member name is shown; if you also want to
-see the modes (permissions), timestamp, owner, group, and size, you can
-request that by also specifying the @samp{v} modifier.
+archive. Normally only the member name is shown, but if the modifier
+@samp{O} is specified, then the corresponding offset of the member is also
+displayed. Finally, in order to see the modes (permissions), timestamp,
+owner, group, and size the @samp{v} modifier should be included.
If you do not specify a @var{member}, all files in the archive
are listed.
you do not specify this modifier, files extracted from the archive
are stamped with the time of extraction.
+@item O
+@cindex offsets of files
+Display member offsets inside the archive. Use together with the @samp{t}
+option.
+
@item P
Use the full path name when matching names in the archive. @sc{gnu}
@command{ar} can not create an archive with a full path name (such archives
-are not POSIX complaint), but other archive creators can. This option
+are not POSIX compliant), but other archive creators can. This option
will cause @sc{gnu} @command{ar} to match file names using a complete path
name, which can be convenient when extracting a single file from an
archive created by another tool.
This modifier shows the version number of @command{ar}.
@end table
-The @command{ar} program also supports some command line options which
+The @command{ar} program also supports some command-line options which
are neither modifiers nor actions, but which do change its behaviour
in specific ways:
@table @samp
@item --help
-Displays the list of command line options supported by @command{ar}
+Displays the list of command-line options supported by @command{ar}
and then exits.
@item --version
@item --plugin @var{name}
@cindex plugins
-The optional command line switch @option{--plugin @var{name}} causes
+The optional command-line switch @option{--plugin @var{name}} causes
@command{ar} to load the plugin called @var{name} which adds support
for more file formats, including object files with link-time
optimization information.
sufficient to just copy the newest one.
@item --target @var{target}
-The optional command line switch @option{--target @var{bfdname}}
+The optional command-line switch @option{--target @var{bfdname}}
specifies that the archive members are in an object code format
different from your system's default format. See
@xref{Target Selection}, for more information.
[@option{-s}|@option{--print-armap}] [@option{-t} @var{radix}|@option{--radix=}@var{radix}]
[@option{-u}|@option{--undefined-only}] [@option{-V}|@option{--version}]
[@option{-X 32_64}] [@option{--defined-only}] [@option{--no-demangle}]
- [@option{--plugin} @var{name}] [@option{--size-sort}] [@option{--special-syms}]
+ [@option{--plugin} @var{name}]
+ [@option{--no-recurse-limit}|@option{--recurse-limit}]]
+ [@option{--size-sort}] [@option{--special-syms}]
[@option{--synthetic}] [@option{--with-symbol-versions}] [@option{--target=}@var{bfdname}]
[@var{objfile}@dots{}]
@c man end
@item B
@itemx b
-The symbol is in the uninitialized data section (known as BSS).
+The symbol is in the BSS data section. This section typically
+contains zero-initialized or uninitialized data, although the exact
+behavior is system dependent.
@item C
The symbol is common. Common symbols are uninitialized data. When
@item S
@itemx s
-The symbol is in an uninitialized data section for small objects.
+The symbol is in an uninitialized or zero-initialized data section
+for small objects.
@item T
@itemx t
@item --no-demangle
Do not demangle low-level symbol names. This is the default.
+@item --recurse-limit
+@itemx --no-recurse-limit
+@itemx --recursion-limit
+@itemx --no-recursion-limit
+Enables or disables a limit on the amount of recursion performed
+whilst demangling strings. Since the name mangling formats allow for
+an inifinite level of recursion it is possible to create strings whose
+decoding will exhaust the amount of stack space available on the host
+machine, triggering a memory fault. The limit tries to prevent this
+from happening by restricting recursion to 2048 levels of nesting.
+
+The default is for this limit to be enabled, but disabling it may be
+necessary in order to demangle truly complicated names. Note however
+that if the recursion limit is disabled then stack exhaustion is
+possible and any bug reports about such an event will be rejected.
+
@item -D
@itemx --dynamic
@cindex dynamic symbols
[@option{--localize-hidden}]
[@option{-L} @var{symbolname}|@option{--localize-symbol=}@var{symbolname}]
[@option{--globalize-symbol=}@var{symbolname}]
+ [@option{--globalize-symbols=}@var{filename}]
[@option{-W} @var{symbolname}|@option{--weaken-symbol=}@var{symbolname}]
[@option{-w}|@option{--wildcard}]
[@option{-x}|@option{--discard-all}]
[@option{--strip-unneeded-symbols=}@var{filename}]
[@option{--keep-global-symbols=}@var{filename}]
[@option{--localize-symbols=}@var{filename}]
- [@option{--globalize-symbols=}@var{filename}]
[@option{--weaken-symbols=}@var{filename}]
- [@option{--add-symbol} @var{name}=[@var{section}:]@var{value}[,@var{flags}]
+ [@option{--add-symbol} @var{name}=[@var{section}:]@var{value}[,@var{flags}]]
[@option{--alt-machine-code=}@var{index}]
[@option{--prefix-symbols=}@var{string}]
[@option{--prefix-sections=}@var{string}]
[@option{--elf-stt-common=@var{val}}]
[@option{--merge-notes}]
[@option{--no-merge-notes}]
+ [@option{--verilog-data-width=@var{val}}]
[@option{-v}|@option{--verbose}]
[@option{-V}|@option{--version}]
[@option{--help}] [@option{--info}]
remove the section '.text.foo'.
@item --remove-relocations=@var{sectionpattern}
-Remove relocations from the output file for any section matching
-@var{sectionpattern}. This option may be given more than once. Note
-that using this option inappropriately may make the output file
-unusable. Wildcard characters are accepted in @var{sectionpattern}.
+Remove non-dynamic relocations from the output file for any section
+matching @var{sectionpattern}. This option may be given more than
+once. Note that using this option inappropriately may make the output
+file unusable, and attempting to remove a dynamic relocation section
+such as @samp{.rela.plt} from an executable or shared library with
+@option{--remove-relocations=.plt} will not work. Wildcard characters
+are accepted in @var{sectionpattern}.
For example:
@smallexample
--remove-relocations=.text.*
@end smallexample
-will remove the relocations for all sections matching the patter
+will remove the relocations for all sections matching the pattern
'.text.*'.
If the first character of @var{sectionpattern} is the exclamation
@itemx --keep-global-symbol=@var{symbolname}
Keep only symbol @var{symbolname} global. Make all other symbols local
to the file, so that they are not visible externally. This option may
-be given more than once.
+be given more than once. Note: this option cannot be used in
+conjunction with the @option{--globalize-symbol} or
+@option{--globalize-symbols} options.
@item --localize-hidden
In an ELF object, mark all symbols that have hidden or internal visibility
@item --globalize-symbol=@var{symbolname}
Give symbol @var{symbolname} global scoping so that it is visible
outside of the file in which it is defined. This option may be given
-more than once.
+more than once. Note: this option cannot be used in conjunction with
+the @option{-G} or @option{--keep-global-symbol} options.
@item -w
@itemx --wildcard
@item --rename-section @var{oldname}=@var{newname}[,@var{flags}]
Rename a section from @var{oldname} to @var{newname}, optionally
changing the section's flags to @var{flags} in the process. This has
-the advantage over usng a linker script to perform the rename in that
+the advantage over using a linker script to perform the rename in that
the output stays as an object file and does not become a linked
executable.
Apply @option{--globalize-symbol} option to each symbol listed in the file
@var{filename}. @var{filename} is simply a flat file, with one symbol
name per line. Line comments may be introduced by the hash character.
-This option may be given more than once.
+This option may be given more than once. Note: this option cannot be
+used in conjunction with the @option{-G} or @option{--keep-global-symbol}
+options.
@item --weaken-symbols=@var{filename}
Apply @option{--weaken-symbol} option to each symbol listed in the file
@smallexample
objcopy --add-gnu-debuglink=foo.debug
@end smallexample
-
+
At debug time the debugger will attempt to look for the separate debug
info file in a set of known locations. The exact set of these
locations varies depending upon the distribution being used, but it
to create these files is as follows:
@enumerate
-@item Link the executable as normal. Assuming that is is called
+@item Link the executable as normal. Assuming that it is called
@code{foo} then...
@item Run @code{objcopy --only-keep-debug foo foo.dbg} to
create a file containing the debugging info.
@itemx --version
Show the version number of @command{objcopy}.
+@item --verilog-data-width=@var{bytes}
+For Verilog output, this options controls the number of bytes
+converted for each output data element. The input target controls the
+endianness of the conversion.
+
@item -v
@itemx --verbose
Verbose output: list all object files modified. In the case of
objdump [@option{-a}|@option{--archive-headers}]
[@option{-b} @var{bfdname}|@option{--target=@var{bfdname}}]
[@option{-C}|@option{--demangle}[=@var{style}] ]
- [@option{-d}|@option{--disassemble}]
+ [@option{-d}|@option{--disassemble}[=@var{symbol}]]
[@option{-D}|@option{--disassemble-all}]
[@option{-z}|@option{--disassemble-zeroes}]
[@option{-EB}|@option{-EL}|@option{--endian=}@{big | little @}]
[@option{-R}|@option{--dynamic-reloc}]
[@option{-s}|@option{--full-contents}]
[@option{-W[lLiaprmfFsoRtUuTgAckK]}|
- @option{--dwarf}[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]
+ @option{--dwarf}[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]]
+ [@option{--ctf=}@var{section}]
[@option{-G}|@option{--stabs}]
[@option{-t}|@option{--syms}]
[@option{-T}|@option{--dynamic-syms}]
[@option{--adjust-vma=}@var{offset}]
[@option{--dwarf-depth=@var{n}}]
[@option{--dwarf-start=@var{n}}]
+ [@option{--ctf-parent=}@var{section}]
+ [@option{--ctf-symbols=}@var{section}]
+ [@option{--ctf-strings=}@var{section}]
+ [@option{--no-recurse-limit}|@option{--recurse-limit}]
[@option{--special-syms}]
[@option{--prefix=}@var{prefix}]
[@option{--prefix-strip=}@var{level}]
choose an appropriate demangling style for your compiler. @xref{c++filt},
for more information on demangling.
+@item --recurse-limit
+@itemx --no-recurse-limit
+@itemx --recursion-limit
+@itemx --no-recursion-limit
+Enables or disables a limit on the amount of recursion performed
+whilst demangling strings. Since the name mangling formats allow for
+an inifinite level of recursion it is possible to create strings whose
+decoding will exhaust the amount of stack space available on the host
+machine, triggering a memory fault. The limit tries to prevent this
+from happening by restricting recursion to 2048 levels of nesting.
+
+The default is for this limit to be enabled, but disabling it may be
+necessary in order to demangle truly complicated names. Note however
+that if the recursion limit is disabled then stack exhaustion is
+possible and any bug reports about such an event will be rejected.
+
@item -g
@itemx --debugging
-Display debugging information. This attempts to parse STABS and IEEE
+Display debugging information. This attempts to parse STABS
debugging format information stored in the file and print it out using
-a C like syntax. If neither of these formats are found this option
+a C like syntax. If no STABS debuging was found this option
falls back on the @option{-W} option to print any DWARF information in
the file.
@item -d
@itemx --disassemble
+@itemx --disassemble=@var{symbol}
@cindex disassembling object code
@cindex machine instructions
-Display the assembler mnemonics for the machine instructions from
-@var{objfile}. This option only disassembles those sections which are
-expected to contain instructions.
+Display the assembler mnemonics for the machine instructions from the
+input file. This option only disassembles those sections which are
+expected to contain instructions. If the optional @var{symbol}
+argument is given, then display the assembler mnemonics starting at
+@var{symbol}. If @var{symbol} is a function name then disassembly
+will stop at the end of the function, otherwise it will stop when the
+next symbol is encountered. If there are no matches for @var{symbol}
+then nothing will be displayed.
+
+Note if the @option{--dwarf=follow-links} option has also been enabled
+then any symbol tables in linked debug info files will be read in and
+used when disassembling.
@item -D
@itemx --disassemble-all
of forcing the disassembler to decode pieces of data found in code
sections as if they were instructions.
+Note if the @option{--dwarf=follow-links} option has also been enabled
+then any symbol tables in linked debug info files will be read in and
+used when disassembling.
+
@item --prefix-addresses
When disassembling, print the complete address on each line. This is
the older disassembly format.
special QuarkSE-EM instructions, @option{fpuda} selects the printing
of double precision assist instructions, @option{fpus} selects the
printing of FPU single precision FP instructions, while @option{fpud}
-selects the printing of FPU souble precision FP instructions.
+selects the printing of FPU double precision FP instructions.
Additionally, one can choose to have all the immediates printed in
hexadecimal using @option{hex}. By default, the short immediates are
printed using the decimal representation, while the long immediate
useful when attempting to disassemble thumb code produced by other
compilers.
+For AArch64 targets this switch can be used to set whether instructions are
+disassembled as the most general instruction using the @option{-M no-aliases}
+option or whether instruction notes should be generated as comments in the
+disasssembly using @option{-M notes}.
+
For the x86, some of the options duplicate functions of the @option{-m}
switch, but allow finer grained control. Multiple selections from the
following may be specified as a comma separated string.
@item --dwarf-check
Enable additional checks for consistency of Dwarf information.
+@include ctf.options.texi
+
@item -G
@itemx --stabs
@cindex stab
@smallexample
@c man begin SYNOPSIS size
-size [@option{-A}|@option{-B}|@option{--format=}@var{compatibility}]
+size [@option{-A}|@option{-B}|@option{-G}|@option{--format=}@var{compatibility}]
[@option{--help}]
[@option{-d}|@option{-o}|@option{-x}|@option{--radix=}@var{number}]
[@option{--common}]
@c man begin OPTIONS size
-The command line options have the following meanings:
+The command-line options have the following meanings:
@table @env
@item -A
@itemx -B
+@itemx -G
@itemx --format=@var{compatibility}
@cindex @command{size} display format
Using one of these options, you can choose whether the output from @sc{gnu}
@command{size} resembles output from System V @command{size} (using @option{-A},
or @option{--format=sysv}), or Berkeley @command{size} (using @option{-B}, or
@option{--format=berkeley}). The default is the one-line format similar to
-Berkeley's.
+Berkeley's. Alternatively, you can choose the GNU format output
+(using @option{-G}, or @option{--format=gnu}), this is similar to
+Berkeley's output format, but sizes are counted differently.
@c Bonus for doc-source readers: you can also say --format=strange (or
@c anything else that starts with 's') for sysv, and --format=boring (or
@c anything else that starts with 'b') for Berkeley.
@command{size}:
@smallexample
$ size --format=Berkeley ranlib size
-text data bss dec hex filename
-294880 81920 11592 388392 5ed28 ranlib
-294880 81920 11888 388688 5ee50 size
+ text data bss dec hex filename
+ 294880 81920 11592 388392 5ed28 ranlib
+ 294880 81920 11888 388688 5ee50 size
+@end smallexample
+
+The Berkeley style output counts read only data in the @code{text}
+column, not in the @code{data} column, the @code{dec} and @code{hex}
+columns both display the sum of the @code{text}, @code{data}, and
+@code{bss} columns in decimal and hexadecimal respectively.
+
+The GNU format counts read only data in the @code{data} column, not
+the @code{text} column, and only displays the sum of the @code{text},
+@code{data}, and @code{bss} columns once, in the @code{total} column.
+The @option{--radix} option can be used to change the number base for
+all columns. Here is the same data displayed with GNU conventions:
+
+@smallexample
+$ size --format=GNU ranlib size
+ text data bss total filename
+ 279880 96920 11592 388392 ranlib
+ 279880 96920 11888 388688 size
@end smallexample
@noindent
@item --common
Print total size of common symbols in each file. When using Berkeley
-format these are included in the bss size.
+or GNU format these are included in the bss size.
@item -t
@itemx --totals
-Show totals of all objects listed (Berkeley format listing mode only).
+Show totals of all objects listed (Berkeley or GNU format mode only).
@item --target=@var{bfdname}
@cindex object code format
reading from stdin then it will always display all of the printable
sequences that it can find.
-For backwards compatibility any file that occurs after a command line
+For backwards compatibility any file that occurs after a command-line
option of just @option{-} will also be scanned in full, regardless of
-the presence of any @option{-d} option.
+the presence of any @option{-d} option.
@command{strings} is mainly useful for determining the contents of
non-text files.
@itemx --no-merge-notes
For ELF files, attempt (or do not attempt) to reduce the size of any
SHT_NOTE type sections by removing duplicate notes. The default is to
-attempt this reduction.
+attempt this reduction unless stripping debug or DWO information.
@item -N @var{symbolname}
@itemx --strip-symbol=@var{symbolname}
to create these files is as follows:
@enumerate
-@item Link the executable as normal. Assuming that is is called
+@item Link the executable as normal. Assuming that it is called
@code{foo} then...
@item Run @code{objcopy --only-keep-debug foo foo.dbg} to
create a file containing the debugging info.
[@option{-p}|@option{--no-params}]
[@option{-t}|@option{--types}]
[@option{-i}|@option{--no-verbose}]
+ [@option{-r}|@option{--no-recurse-limit}]
+ [@option{-R}|@option{--recurse-limit}]
[@option{-s} @var{format}|@option{--format=}@var{format}]
[@option{--help}] [@option{--version}] [@var{symbol}@dots{}]
@c man end
names from the standard input instead. All the results are printed on
the standard output. The difference between reading names from the
command line versus reading names from the standard input is that
-command line arguments are expected to be just mangled names and no
+command-line arguments are expected to be just mangled names and no
checking is performed to separate them from surrounding text. Thus
for example:
Do not include implementation details (if any) in the demangled
output.
+@item -r
+@itemx -R
+@itemx --recurse-limit
+@itemx --no-recurse-limit
+@itemx --recursion-limit
+@itemx --no-recursion-limit
+Enables or disables a limit on the amount of recursion performed
+whilst demangling strings. Since the name mangling formats allow for
+an inifinite level of recursion it is possible to create strings whose
+decoding will exhaust the amount of stack space available on the host
+machine, triggering a memory fault. The limit tries to prevent this
+from happening by restricting recursion to 2048 levels of nesting.
+
+The default is for this limit to be enabled, but disabling it may be
+necessary in order to demangle truly complicated names. Note however
+that if the recursion limit is disabled then stack exhaustion is
+possible and any bug reports about such an event will be rejected.
+
+The @option{-r} option is a synonym for the
+@option{--no-recurse-limit} option. The @option{-R} option is a
+synonym for the @option{--recurse-limit} option.
+
@item -s @var{format}
@itemx --format=@var{format}
@command{c++filt} can decode various methods of mangling, used by
addr2line [@option{-a}|@option{--addresses}]
[@option{-b} @var{bfdname}|@option{--target=}@var{bfdname}]
[@option{-C}|@option{--demangle}[=@var{style}]]
+ [@option{-r}|@option{--no-recurse-limit}]
+ [@option{-R}|@option{--recurse-limit}]
[@option{-e} @var{filename}|@option{--exe=}@var{filename}]
[@option{-f}|@option{--functions}] [@option{-s}|@option{--basename}]
[@option{-i}|@option{--inlines}]
Make the output more human friendly: each location are printed on one line.
If option @option{-i} is specified, lines for all enclosing scopes are
prefixed with @samp{(inlined by)}.
-@end table
-
-@c man end
-
-@ignore
-@c man begin SEEALSO addr2line
-Info entries for @file{binutils}.
-@c man end
-@end ignore
-
-@node nlmconv
-@chapter nlmconv
-
-@command{nlmconv} converts a relocatable object file into a NetWare
-Loadable Module.
-
-@ignore
-@command{nlmconv} currently works with @samp{i386} object
-files in @code{coff}, @sc{elf}, or @code{a.out} format, and @sc{SPARC}
-object files in @sc{elf}, or @code{a.out} format@footnote{
-@command{nlmconv} should work with any @samp{i386} or @sc{sparc} object
-format in the Binary File Descriptor library. It has only been tested
-with the above formats.}.
-@end ignore
-
-@quotation
-@emph{Warning:} @command{nlmconv} is not always built as part of the binary
-utilities, since it is only useful for NLM targets.
-@end quotation
-@c man title nlmconv converts object code into an NLM.
-
-@smallexample
-@c man begin SYNOPSIS nlmconv
-nlmconv [@option{-I} @var{bfdname}|@option{--input-target=}@var{bfdname}]
- [@option{-O} @var{bfdname}|@option{--output-target=}@var{bfdname}]
- [@option{-T} @var{headerfile}|@option{--header-file=}@var{headerfile}]
- [@option{-d}|@option{--debug}] [@option{-l} @var{linker}|@option{--linker=}@var{linker}]
- [@option{-h}|@option{--help}] [@option{-V}|@option{--version}]
- @var{infile} @var{outfile}
-@c man end
-@end smallexample
-
-@c man begin DESCRIPTION nlmconv
-
-@command{nlmconv} converts the relocatable @samp{i386} object file
-@var{infile} into the NetWare Loadable Module @var{outfile}, optionally
-reading @var{headerfile} for NLM header information. For instructions
-on writing the NLM command file language used in header files, see the
-@samp{linkers} section, @samp{NLMLINK} in particular, of the @cite{NLM
-Development and Tools Overview}, which is part of the NLM Software
-Developer's Kit (``NLM SDK''), available from Novell, Inc.
-@command{nlmconv} uses the @sc{gnu} Binary File Descriptor library to read
-@var{infile};
-@ifclear man
-see @ref{BFD,,BFD,ld.info,Using LD}, for more information.
-@end ifclear
-
-@command{nlmconv} can perform a link step. In other words, you can list
-more than one object file for input if you list them in the definitions
-file (rather than simply specifying one input file on the command line).
-In this case, @command{nlmconv} calls the linker for you.
-
-@c man end
-
-@c man begin OPTIONS nlmconv
-
-@table @env
-@item -I @var{bfdname}
-@itemx --input-target=@var{bfdname}
-Object format of the input file. @command{nlmconv} can usually determine
-the format of a given file (so no default is necessary).
-@xref{Target Selection}, for more information.
-
-@item -O @var{bfdname}
-@itemx --output-target=@var{bfdname}
-Object format of the output file. @command{nlmconv} infers the output
-format based on the input format, e.g. for a @samp{i386} input file the
-output format is @samp{nlm32-i386}.
-@xref{Target Selection}, for more information.
-
-@item -T @var{headerfile}
-@itemx --header-file=@var{headerfile}
-Reads @var{headerfile} for NLM header information. For instructions on
-writing the NLM command file language used in header files, see@ see the
-@samp{linkers} section, of the @cite{NLM Development and Tools
-Overview}, which is part of the NLM Software Developer's Kit, available
-from Novell, Inc.
-
-@item -d
-@itemx --debug
-Displays (on standard error) the linker command line used by @command{nlmconv}.
-
-@item -l @var{linker}
-@itemx --linker=@var{linker}
-Use @var{linker} for any linking. @var{linker} can be an absolute or a
-relative pathname.
-
-@item -h
-@itemx --help
-Prints a usage summary.
+@item -r
+@itemx -R
+@itemx --recurse-limit
+@itemx --no-recurse-limit
+@itemx --recursion-limit
+@itemx --no-recursion-limit
+Enables or disables a limit on the amount of recursion performed
+whilst demangling strings. Since the name mangling formats allow for
+an inifinite level of recursion it is possible to create strings whose
+decoding will exhaust the amount of stack space available on the host
+machine, triggering a memory fault. The limit tries to prevent this
+from happening by restricting recursion to 2048 levels of nesting.
+
+The default is for this limit to be enabled, but disabling it may be
+necessary in order to demangle truly complicated names. Note however
+that if the recursion limit is disabled then stack exhaustion is
+possible and any bug reports about such an event will be rejected.
+
+The @option{-r} option is a synonym for the
+@option{--no-recurse-limit} option. The @option{-R} option is a
+synonym for the @option{--recurse-limit} option.
+
+Note this option is only effective if the @option{-C} or
+@option{--demangle} option has been enabled.
-@item -V
-@itemx --version
-Prints the version number for @command{nlmconv}.
@end table
@c man end
@ignore
-@c man begin SEEALSO nlmconv
-the Info entries for @file{binutils}.
+@c man begin SEEALSO addr2line
+Info entries for @file{binutils}.
@c man end
@end ignore
@item -H
@itemx --help
-Displays a list of command line options and then exits.
+Displays a list of command-line options and then exits.
@item -m @var{characters}
@itemx --maxlength @var{characters}
@command{dlltool} builds the library file by hand, but it builds the
exports file by creating temporary files containing assembler statements
-and then assembling these. The @option{-S} command line option can be
+and then assembling these. The @option{-S} command-line option can be
used to specify the path to the assembler that dlltool will use,
and the @option{-f} option can be used to pass specific flags to that
assembler. The @option{-n} can be used to prevent dlltool from deleting
@c man begin OPTIONS dlltool
-The command line options have the following meanings:
+The command-line options have the following meanings:
@table @env
@item -f @var{options}
@itemx --as-flags @var{options}
-Specifies any specific command line options to be passed to the
+Specifies any specific command-line options to be passed to the
assembler when building the exports file. This option will work even if
the @option{-S} option is not used. This option only takes one argument,
and if it occurs more than once on the command line, then later
@item -h
@itemx --help
-Displays a list of command line options and then exits.
+Displays a list of command-line options and then exits.
@item -V
@itemx --version
@option{--debug-dump}[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]]
[@option{--dwarf-depth=@var{n}}]
[@option{--dwarf-start=@var{n}}]
+ [@option{--ctf=}@var{section}]
+ [@option{--ctf-parent=}@var{section}]
+ [@option{--ctf-symbols=}@var{section}]
+ [@option{--ctf-strings=}@var{section}]
[@option{-I}|@option{--histogram}]
[@option{-v}|@option{--version}]
[@option{-W}|@option{--wide}]
@cindex unwind information
Displays the contents of the file's unwind section, if it has one. Only
the unwind sections for IA64 ELF files, as well as ARM unwind tables
-(@code{.ARM.exidx} / @code{.ARM.extab}) are currently supported.
+(@code{.ARM.exidx} / @code{.ARM.extab}) are currently supported. If
+support is not yet implemented for your architecture you could try
+dumping the contents of the @var{.eh_frames} section using the
+@option{--debug-dump=frames} or @option{--debug-dump=frames-interp}
+options.
@item -d
@itemx --dynamic
@itemx --debug-dump[=rawline,=decodedline,=info,=abbrev,=pubnames,=aranges,=macro,=frames,=frames-interp,=str,=loc,=Ranges,=pubtypes,=trace_info,=trace_abbrev,=trace_aranges,=gdb_index,=addr,=cu_index,=links,=follow-links]
@include debug.options.texi
+@include ctf.options.texi
+@item --ctf-symbols=@var{section}
+@item --ctf-strings=@var{section}
+Specify the name of another section from which the CTF file can inherit
+strings and symbols.
+
+If either of @option{--ctf-symbols} or @option{--ctf-strings} is specified, the
+other must be specified as well.
+
@item -I
@itemx --histogram
Display a histogram of bucket list lengths when displaying the contents
@item -H
@itemx --help
-Display the command line options understood by @command{readelf}.
+Display the command-line options understood by @command{readelf}.
@end table
@cindex Update ELF header
@kindex elfedit
-@c man title elfedit Update the ELF header of ELF files.
+@c man title elfedit Update ELF header and program property of ELF files.
@smallexample
@c man begin SYNOPSIS elfedit
@option{--output-mach=}@var{machine}
@option{--output-type=}@var{type}
@option{--output-osabi=}@var{osabi}
+ @option{--enable-x86-feature=}@var{feature}
+ @option{--disable-x86-feature=}@var{feature}
[@option{-v}|@option{--version}]
[@option{-h}|@option{--help}]
@var{elffile}@dots{}
@c man begin DESCRIPTION elfedit
-@command{elfedit} updates the ELF header of ELF files which have
-the matching ELF machine and file types. The options control how and
-which fields in the ELF header should be updated.
+@command{elfedit} updates the ELF header and program property of ELF
+files which have the matching ELF machine and file types. The options
+control how and which fields in the ELF header and program property
+should be updated.
@var{elffile}@dots{} are the ELF files to be updated. 32-bit and
64-bit ELF files are supported, as are archives containing ELF files.
The long and short forms of options, shown here as alternatives, are
equivalent. At least one of the @option{--output-mach},
-@option{--output-type} and @option{--output-osabi} options must be given.
+@option{--output-type}, @option{--output-osabi},
+@option{--enable-x86-feature} and @option{--disable-x86-feature}
+options must be given.
@table @env
Change the ELF OSABI in the ELF header to @var{osabi}. The
supported ELF OSABI are the same as @option{--input-osabi}.
+@item --enable-x86-feature=@var{feature}
+Set the @var{feature} bit in program property in @var{exec} or @var{dyn}
+ELF files with machine types of @var{i386} or @var{x86-64}. The
+supported features are, @var{ibt} and @var{shstk}.
+
+@item --disable-x86-feature=@var{feature}
+Clear the @var{feature} bit in program property in @var{exec} or
+@var{dyn} ELF files with machine types of @var{i386} or @var{x86-64}.
+The supported features are the same as @option{--enable-x86-feature}.
+
+Note: @option{--enable-x86-feature} and @option{--disable-x86-feature}
+are available only on hosts with @samp{mmap} support.
+
@item -v
@itemx --version
Display the version number of @command{elfedit}.
@item -h
@itemx --help
-Display the command line options understood by @command{elfedit}.
+Display the command-line options understood by @command{elfedit}.
@end table
@enumerate
@item
-command line option: @option{-b} or @option{--target}
+command-line option: @option{-b} or @option{--target}
@item
environment variable @code{GNUTARGET}
@enumerate
@item
-command line options: @option{-I} or @option{--input-target}, or @option{-F} or @option{--target}
+command-line options: @option{-I} or @option{--input-target}, or @option{-F} or @option{--target}
@item
environment variable @code{GNUTARGET}
@enumerate
@item
-command line options: @option{-O} or @option{--output-target}, or @option{-F} or @option{--target}
+command-line options: @option{-O} or @option{--output-target}, or @option{-F} or @option{--target}
@item
the input target (see ``@command{objcopy} and @command{strip} Input Target'' above)
@enumerate
@item
-command line option: @option{--target}
+command-line option: @option{--target}
@item
environment variable @code{GNUTARGET}
@enumerate
@item
-command line option: @option{-m} or @option{--architecture}
+command-line option: @option{-m} or @option{--architecture}
@item
deduced from the input file