#define RX_OPCODE_BIG_ENDIAN 0
+/* This is a meta-target that's used only with objcopy, to avoid the
+ endian-swap we would otherwise get. We check for this in
+ rx_elf_object_p(). */
+const bfd_target bfd_elf32_rx_be_ns_vec;
+const bfd_target bfd_elf32_rx_be_vec;
+
#ifdef DEBUG
char * rx_get_reloc (long);
void rx_dump_symtab (bfd *, void *, void *);
struct elf_link_hash_entry ** sym_hashes;
Elf_Internal_Rela * rel;
Elf_Internal_Rela * relend;
+ bfd_boolean pid_mode;
+ bfd_boolean saw_subtract = FALSE;
+
+ if (elf_elfheader (output_bfd)->e_flags & E_FLAG_RX_PID)
+ pid_mode = TRUE;
+ else
+ pid_mode = FALSE;
symtab_hdr = & elf_tdata (input_bfd)->symtab_hdr;
sym_hashes = elf_sym_hashes (input_bfd);
sec = NULL;
relocation = 0;
+ if (rx_stack_top == 0)
+ saw_subtract = FALSE;
+
if (r_symndx < symtab_hdr->sh_info)
{
sym = local_syms + r_symndx;
_bfd_error_handler (_("%B:%A: Warning: deprecated Red Hat reloc " type " detected against: %s."), \
input_bfd, input_section, name)
+ /* Check for unsafe relocs in PID mode. These are any relocs where
+ an absolute address is being computed. There are special cases
+ for relocs against symbols that are known to be referenced in
+ crt0.o before the PID base address register has been initialised. */
+#define UNSAFE_FOR_PID \
+ do \
+ { \
+ if (pid_mode \
+ && sec != NULL \
+ && sec->flags & SEC_READONLY \
+ && !(input_section->flags & SEC_DEBUGGING) \
+ && strcmp (name, "__pid_base") != 0 \
+ && strcmp (name, "__gp") != 0 \
+ && strcmp (name, "__romdatastart") != 0 \
+ && !saw_subtract) \
+ _bfd_error_handler (_("%B(%A): unsafe PID relocation %s at 0x%08lx (against %s in %s)"), \
+ input_bfd, input_section, howto->name, \
+ input_section->output_section->vma + input_section->output_offset + rel->r_offset, \
+ name, sec->name); \
+ } \
+ while (0)
+
/* Opcode relocs are always big endian. Data relocs are bi-endian. */
switch (r_type)
{
WARN_REDHAT ("RX_RH_8_NEG");
relocation = - relocation;
case R_RX_DIR8S_PCREL:
+ UNSAFE_FOR_PID;
RANGE (-128, 127);
OP (0) = relocation;
break;
case R_RX_DIR8S:
+ UNSAFE_FOR_PID;
RANGE (-128, 255);
OP (0) = relocation;
break;
case R_RX_DIR8U:
+ UNSAFE_FOR_PID;
RANGE (0, 255);
OP (0) = relocation;
break;
WARN_REDHAT ("RX_RH_16_NEG");
relocation = - relocation;
case R_RX_DIR16S_PCREL:
+ UNSAFE_FOR_PID;
RANGE (-32768, 32767);
#if RX_OPCODE_BIG_ENDIAN
#else
case R_RX_RH_16_OP:
WARN_REDHAT ("RX_RH_16_OP");
+ UNSAFE_FOR_PID;
RANGE (-32768, 32767);
#if RX_OPCODE_BIG_ENDIAN
OP (1) = relocation;
break;
case R_RX_DIR16S:
+ UNSAFE_FOR_PID;
RANGE (-32768, 65535);
if (BIGE (output_bfd) && !(input_section->flags & SEC_CODE))
{
break;
case R_RX_DIR16U:
+ UNSAFE_FOR_PID;
RANGE (0, 65536);
#if RX_OPCODE_BIG_ENDIAN
OP (1) = relocation;
break;
case R_RX_DIR16:
+ UNSAFE_FOR_PID;
RANGE (-32768, 65536);
#if RX_OPCODE_BIG_ENDIAN
OP (1) = relocation;
break;
case R_RX_DIR16_REV:
+ UNSAFE_FOR_PID;
RANGE (-32768, 65536);
#if RX_OPCODE_BIG_ENDIAN
OP (0) = relocation;
break;
case R_RX_RH_24_NEG:
+ UNSAFE_FOR_PID;
WARN_REDHAT ("RX_RH_24_NEG");
relocation = - relocation;
case R_RX_DIR24S_PCREL:
break;
case R_RX_RH_24_OP:
+ UNSAFE_FOR_PID;
WARN_REDHAT ("RX_RH_24_OP");
RANGE (-0x800000, 0x7fffff);
#if RX_OPCODE_BIG_ENDIAN
break;
case R_RX_DIR24S:
+ UNSAFE_FOR_PID;
RANGE (-0x800000, 0x7fffff);
if (BIGE (output_bfd) && !(input_section->flags & SEC_CODE))
{
break;
case R_RX_RH_24_UNS:
+ UNSAFE_FOR_PID;
WARN_REDHAT ("RX_RH_24_UNS");
RANGE (0, 0xffffff);
#if RX_OPCODE_BIG_ENDIAN
break;
case R_RX_RH_32_NEG:
+ UNSAFE_FOR_PID;
WARN_REDHAT ("RX_RH_32_NEG");
relocation = - relocation;
#if RX_OPCODE_BIG_ENDIAN
break;
case R_RX_RH_32_OP:
+ UNSAFE_FOR_PID;
WARN_REDHAT ("RX_RH_32_OP");
#if RX_OPCODE_BIG_ENDIAN
OP (3) = relocation;
/* Complex reloc handling: */
case R_RX_ABS32:
+ UNSAFE_FOR_PID;
RX_STACK_POP (relocation);
#if RX_OPCODE_BIG_ENDIAN
OP (3) = relocation;
break;
case R_RX_ABS32_REV:
+ UNSAFE_FOR_PID;
RX_STACK_POP (relocation);
#if RX_OPCODE_BIG_ENDIAN
OP (0) = relocation;
case R_RX_ABS24S_PCREL:
case R_RX_ABS24S:
+ UNSAFE_FOR_PID;
RX_STACK_POP (relocation);
RANGE (-0x800000, 0x7fffff);
if (BIGE (output_bfd) && !(input_section->flags & SEC_CODE))
break;
case R_RX_ABS16:
+ UNSAFE_FOR_PID;
RX_STACK_POP (relocation);
RANGE (-32768, 65535);
#if RX_OPCODE_BIG_ENDIAN
break;
case R_RX_ABS16_REV:
+ UNSAFE_FOR_PID;
RX_STACK_POP (relocation);
RANGE (-32768, 65535);
#if RX_OPCODE_BIG_ENDIAN
break;
case R_RX_ABS16U:
+ UNSAFE_FOR_PID;
RX_STACK_POP (relocation);
RANGE (0, 65536);
#if RX_OPCODE_BIG_ENDIAN
break;
case R_RX_ABS16UL:
+ UNSAFE_FOR_PID;
RX_STACK_POP (relocation);
relocation >>= 2;
RANGE (0, 65536);
break;
case R_RX_ABS16UW:
+ UNSAFE_FOR_PID;
RX_STACK_POP (relocation);
relocation >>= 1;
RANGE (0, 65536);
break;
case R_RX_ABS8:
+ UNSAFE_FOR_PID;
RX_STACK_POP (relocation);
RANGE (-128, 255);
OP (0) = relocation;
break;
case R_RX_ABS8U:
+ UNSAFE_FOR_PID;
RX_STACK_POP (relocation);
RANGE (0, 255);
OP (0) = relocation;
break;
case R_RX_ABS8UL:
+ UNSAFE_FOR_PID;
RX_STACK_POP (relocation);
relocation >>= 2;
RANGE (0, 255);
break;
case R_RX_ABS8UW:
+ UNSAFE_FOR_PID;
RX_STACK_POP (relocation);
relocation >>= 1;
RANGE (0, 255);
OP (0) = relocation;
break;
- case R_RX_ABS8S_PCREL:
case R_RX_ABS8S:
+ UNSAFE_FOR_PID;
+ case R_RX_ABS8S_PCREL:
RX_STACK_POP (relocation);
RANGE (-128, 127);
OP (0) = relocation;
if (r_symndx < symtab_hdr->sh_info)
RX_STACK_PUSH (sec->output_section->vma
+ sec->output_offset
- + sym->st_value);
+ + sym->st_value
+ + rel->r_addend);
else
{
if (h != NULL
|| h->root.type == bfd_link_hash_defweak))
RX_STACK_PUSH (h->root.u.def.value
+ sec->output_section->vma
- + sec->output_offset);
+ + sec->output_offset
+ + rel->r_addend);
else
_bfd_error_handler (_("Warning: RX_SYM reloc with an unknown symbol"));
}
{
int32_t tmp1, tmp2;
+ saw_subtract = TRUE;
RX_STACK_POP (tmp1);
RX_STACK_POP (tmp2);
tmp2 -= tmp1;
{
int32_t tmp1, tmp2;
+ saw_subtract = TRUE;
RX_STACK_POP (tmp1);
RX_STACK_POP (tmp2);
tmp1 /= tmp2;
}
else if (old_flags != new_flags)
{
- flagword known_flags = E_FLAG_RX_64BIT_DOUBLES | E_FLAG_RX_DSP;
+ flagword known_flags = E_FLAG_RX_64BIT_DOUBLES | E_FLAG_RX_DSP | E_FLAG_RX_PID;
if ((old_flags ^ new_flags) & known_flags)
{
Elf_Internal_Phdr *phdr = elf_tdata (abfd)->phdr;
int nphdrs = elf_elfheader (abfd)->e_phnum;
sec_ptr bsec;
+ static int saw_be = FALSE;
+
+ /* We never want to automatically choose the non-swapping big-endian
+ target. The user can only get that explicitly, such as with -I
+ and objcopy. */
+ if (abfd->xvec == &bfd_elf32_rx_be_ns_vec
+ && abfd->target_defaulted)
+ return FALSE;
+
+ /* BFD->target_defaulted is not set to TRUE when a target is chosen
+ as a fallback, so we check for "scanning" to know when to stop
+ using the non-swapping target. */
+ if (abfd->xvec == &bfd_elf32_rx_be_ns_vec
+ && saw_be)
+ return FALSE;
+ if (abfd->xvec == &bfd_elf32_rx_be_vec)
+ saw_be = TRUE;
bfd_default_set_arch_mach (abfd, bfd_arch_rx,
elf32_rx_machine (abfd));
bsec = abfd->sections;
while (bsec)
{
- if (phdr[i].p_vaddr <= bsec->lma
+ if (phdr[i].p_vaddr <= bsec->vma
&& bsec->vma <= phdr[i].p_vaddr + (phdr[i].p_filesz - 1))
{
bsec->lma = phdr[i].p_paddr + (bsec->vma - phdr[i].p_vaddr);
#define bfd_elf32_bfd_relax_section elf32_rx_relax_section_wrapper
#include "elf32-target.h"
+
+/* We define a second big-endian target that doesn't have the custom
+ section get/set hooks, for times when we want to preserve the
+ pre-swapped .text sections (like objcopy). */
+
+#undef TARGET_BIG_SYM
+#define TARGET_BIG_SYM bfd_elf32_rx_be_ns_vec
+#undef TARGET_BIG_NAME
+#define TARGET_BIG_NAME "elf32-rx-be-ns"
+#undef TARGET_LITTLE_SYM
+
+#undef bfd_elf32_get_section_contents
+#undef bfd_elf32_set_section_contents
+
+#undef elf32_bed
+#define elf32_bed elf32_rx_be_ns_bed
+
+#include "elf32-target.h"
projects / external / binutils.git / blobdiff