/* DWARF 2 support.
- Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
- 2004, 2005 Free Software Foundation, Inc.
+ Copyright (C) 1994-2014 Free Software Foundation, Inc.
Adapted from gdb/dwarf2read.c by Gavin Koch of Cygnus Solutions
(gavin@cygnus.com).
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or (at
+ the Free Software Foundation; either version 3 of the License, or (at
your option) any later version.
This program is distributed in the hope that it will be useful, but
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */
+ Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
+ MA 02110-1301, USA. */
-#include "bfd.h"
#include "sysdep.h"
+#include "bfd.h"
#include "libiberty.h"
#include "libbfd.h"
#include "elf-bfd.h"
-#include "elf/dwarf2.h"
+#include "dwarf2.h"
/* The data in the .debug_line statement prologue looks like this. */
unsigned short version;
bfd_vma prologue_length;
unsigned char minimum_instruction_length;
+ unsigned char maximum_ops_per_insn;
unsigned char default_is_stmt;
int line_base;
unsigned char line_range;
bfd_byte *data;
};
+struct adjusted_section
+{
+ asection *section;
+ bfd_vma adj_vma;
+};
+
struct dwarf2_debug
{
/* A list of all previously read comp_units. */
struct comp_unit *all_comp_units;
+ /* Last comp unit in list above. */
+ struct comp_unit *last_comp_unit;
+
+ /* Names of the debug sections. */
+ const struct dwarf_debug_section *debug_sections;
+
/* The next unread compilation unit within the .debug_info section.
Zero indicates that the .debug_info section has not been loaded
into a buffer yet. */
/* Pointer to the end of the .debug_info section memory buffer. */
bfd_byte *info_ptr_end;
- /* Pointer to the section and address of the beginning of the
- section. */
+ /* Pointer to the bfd, section and address of the beginning of the
+ section. The bfd might be different than expected because of
+ gnu_debuglink sections. */
+ bfd *bfd_ptr;
asection *sec;
bfd_byte *sec_info_ptr;
+ /* Support for alternate debug info sections created by the DWZ utility:
+ This includes a pointer to an alternate bfd which contains *extra*,
+ possibly duplicate debug sections, and pointers to the loaded
+ .debug_str and .debug_info sections from this bfd. */
+ bfd * alt_bfd_ptr;
+ bfd_byte * alt_dwarf_str_buffer;
+ bfd_size_type alt_dwarf_str_size;
+ bfd_byte * alt_dwarf_info_buffer;
+ bfd_size_type alt_dwarf_info_size;
+
+ /* A pointer to the memory block allocated for info_ptr. Neither
+ info_ptr nor sec_info_ptr are guaranteed to stay pointing to the
+ beginning of the malloc block. This is used only to free the
+ memory later. */
+ bfd_byte *info_ptr_memory;
+
/* Pointer to the symbol table. */
asymbol **syms;
bfd_byte *dwarf_abbrev_buffer;
/* Length of the loaded .debug_abbrev section. */
- unsigned long dwarf_abbrev_size;
+ bfd_size_type dwarf_abbrev_size;
/* Buffer for decode_line_info. */
bfd_byte *dwarf_line_buffer;
/* Length of the loaded .debug_line section. */
- unsigned long dwarf_line_size;
+ bfd_size_type dwarf_line_size;
/* Pointer to the .debug_str section loaded into memory. */
bfd_byte *dwarf_str_buffer;
/* Length of the loaded .debug_str section. */
- unsigned long dwarf_str_size;
+ bfd_size_type dwarf_str_size;
/* Pointer to the .debug_ranges section loaded into memory. */
bfd_byte *dwarf_ranges_buffer;
/* Length of the loaded .debug_ranges section. */
- unsigned long dwarf_ranges_size;
+ bfd_size_type dwarf_ranges_size;
/* If the most recent call to bfd_find_nearest_line was given an
address in an inlined function, preserve a pointer into the
calling chain for subsequent calls to bfd_find_inliner_info to
use. */
struct funcinfo *inliner_chain;
+
+ /* Section VMAs at the time the stash was built. */
+ bfd_vma *sec_vma;
+
+ /* Number of sections whose VMA we must adjust. */
+ int adjusted_section_count;
+
+ /* Array of sections with adjusted VMA. */
+ struct adjusted_section *adjusted_sections;
+
+ /* Number of times find_line is called. This is used in
+ the heuristic for enabling the info hash tables. */
+ int info_hash_count;
+
+#define STASH_INFO_HASH_TRIGGER 100
+
+ /* Hash table mapping symbol names to function infos. */
+ struct info_hash_table *funcinfo_hash_table;
+
+ /* Hash table mapping symbol names to variable infos. */
+ struct info_hash_table *varinfo_hash_table;
+
+ /* Head of comp_unit list in the last hash table update. */
+ struct comp_unit *hash_units_head;
+
+ /* Status of info hash. */
+ int info_hash_status;
+#define STASH_INFO_HASH_OFF 0
+#define STASH_INFO_HASH_ON 1
+#define STASH_INFO_HASH_DISABLED 2
+
+ /* True if we opened bfd_ptr. */
+ bfd_boolean close_on_cleanup;
};
struct arange
/* Chain the previously read compilation units. */
struct comp_unit *next_unit;
+ /* Likewise, chain the compilation unit read after this one.
+ The comp units are stored in reversed reading order. */
+ struct comp_unit *prev_unit;
+
/* Keep the bfd convenient (for memory allocation). */
bfd *abfd;
by its reference. */
bfd_byte *info_ptr_unit;
+ /* Pointer to the start of the debug section, for DW_FORM_ref_addr. */
+ bfd_byte *sec_info_ptr;
+
/* The offset into .debug_line of the line number table. */
unsigned long line_offset;
/* Pointer to dwarf2_debug structure. */
struct dwarf2_debug *stash;
+ /* DWARF format version for this unit - from unit header. */
+ int version;
+
/* Address size for this unit - from unit header. */
unsigned char addr_size;
/* Base address for this unit - from DW_AT_low_pc attribute of
DW_TAG_compile_unit DIE */
bfd_vma base_address;
+
+ /* TRUE if symbols are cached in hash table for faster lookup by name. */
+ bfd_boolean cached;
};
/* This data structure holds the information of an abbrev. */
enum dwarf_form form;
};
+/* Map of uncompressed DWARF debug section name to compressed one. It
+ is terminated by NULL uncompressed_name. */
+
+const struct dwarf_debug_section dwarf_debug_sections[] =
+{
+ { ".debug_abbrev", ".zdebug_abbrev" },
+ { ".debug_aranges", ".zdebug_aranges" },
+ { ".debug_frame", ".zdebug_frame" },
+ { ".debug_info", ".zdebug_info" },
+ { ".debug_info", ".zdebug_info" },
+ { ".debug_line", ".zdebug_line" },
+ { ".debug_loc", ".zdebug_loc" },
+ { ".debug_macinfo", ".zdebug_macinfo" },
+ { ".debug_macro", ".zdebug_macro" },
+ { ".debug_pubnames", ".zdebug_pubnames" },
+ { ".debug_pubtypes", ".zdebug_pubtypes" },
+ { ".debug_ranges", ".zdebug_ranges" },
+ { ".debug_static_func", ".zdebug_static_func" },
+ { ".debug_static_vars", ".zdebug_static_vars" },
+ { ".debug_str", ".zdebug_str", },
+ { ".debug_str", ".zdebug_str", },
+ { ".debug_types", ".zdebug_types" },
+ /* GNU DWARF 1 extensions */
+ { ".debug_sfnames", ".zdebug_sfnames" },
+ { ".debug_srcinfo", ".zebug_srcinfo" },
+ /* SGI/MIPS DWARF 2 extensions */
+ { ".debug_funcnames", ".zdebug_funcnames" },
+ { ".debug_typenames", ".zdebug_typenames" },
+ { ".debug_varnames", ".zdebug_varnames" },
+ { ".debug_weaknames", ".zdebug_weaknames" },
+ { NULL, NULL },
+};
+
+/* NB/ Numbers in this enum must match up with indicies
+ into the dwarf_debug_sections[] array above. */
+enum dwarf_debug_section_enum
+{
+ debug_abbrev = 0,
+ debug_aranges,
+ debug_frame,
+ debug_info,
+ debug_info_alt,
+ debug_line,
+ debug_loc,
+ debug_macinfo,
+ debug_macro,
+ debug_pubnames,
+ debug_pubtypes,
+ debug_ranges,
+ debug_static_func,
+ debug_static_vars,
+ debug_str,
+ debug_str_alt,
+ debug_types,
+ debug_sfnames,
+ debug_srcinfo,
+ debug_funcnames,
+ debug_typenames,
+ debug_varnames,
+ debug_weaknames
+};
+
#ifndef ABBREV_HASH_SIZE
#define ABBREV_HASH_SIZE 121
#endif
#define ATTR_ALLOC_CHUNK 4
#endif
+/* Variable and function hash tables. This is used to speed up look-up
+ in lookup_symbol_in_var_table() and lookup_symbol_in_function_table().
+ In order to share code between variable and function infos, we use
+ a list of untyped pointer for all variable/function info associated with
+ a symbol. We waste a bit of memory for list with one node but that
+ simplifies the code. */
+
+struct info_list_node
+{
+ struct info_list_node *next;
+ void *info;
+};
+
+/* Info hash entry. */
+struct info_hash_entry
+{
+ struct bfd_hash_entry root;
+ struct info_list_node *head;
+};
+
+struct info_hash_table
+{
+ struct bfd_hash_table base;
+};
+
+/* Function to create a new entry in info hash table. */
+
+static struct bfd_hash_entry *
+info_hash_table_newfunc (struct bfd_hash_entry *entry,
+ struct bfd_hash_table *table,
+ const char *string)
+{
+ struct info_hash_entry *ret = (struct info_hash_entry *) entry;
+
+ /* Allocate the structure if it has not already been allocated by a
+ derived class. */
+ if (ret == NULL)
+ {
+ ret = (struct info_hash_entry *) bfd_hash_allocate (table,
+ sizeof (* ret));
+ if (ret == NULL)
+ return NULL;
+ }
+
+ /* Call the allocation method of the base class. */
+ ret = ((struct info_hash_entry *)
+ bfd_hash_newfunc ((struct bfd_hash_entry *) ret, table, string));
+
+ /* Initialize the local fields here. */
+ if (ret)
+ ret->head = NULL;
+
+ return (struct bfd_hash_entry *) ret;
+}
+
+/* Function to create a new info hash table. It returns a pointer to the
+ newly created table or NULL if there is any error. We need abfd
+ solely for memory allocation. */
+
+static struct info_hash_table *
+create_info_hash_table (bfd *abfd)
+{
+ struct info_hash_table *hash_table;
+
+ hash_table = ((struct info_hash_table *)
+ bfd_alloc (abfd, sizeof (struct info_hash_table)));
+ if (!hash_table)
+ return hash_table;
+
+ if (!bfd_hash_table_init (&hash_table->base, info_hash_table_newfunc,
+ sizeof (struct info_hash_entry)))
+ {
+ bfd_release (abfd, hash_table);
+ return NULL;
+ }
+
+ return hash_table;
+}
+
+/* Insert an info entry into an info hash table. We do not check of
+ duplicate entries. Also, the caller need to guarantee that the
+ right type of info in inserted as info is passed as a void* pointer.
+ This function returns true if there is no error. */
+
+static bfd_boolean
+insert_info_hash_table (struct info_hash_table *hash_table,
+ const char *key,
+ void *info,
+ bfd_boolean copy_p)
+{
+ struct info_hash_entry *entry;
+ struct info_list_node *node;
+
+ entry = (struct info_hash_entry*) bfd_hash_lookup (&hash_table->base,
+ key, TRUE, copy_p);
+ if (!entry)
+ return FALSE;
+
+ node = (struct info_list_node *) bfd_hash_allocate (&hash_table->base,
+ sizeof (*node));
+ if (!node)
+ return FALSE;
+
+ node->info = info;
+ node->next = entry->head;
+ entry->head = node;
+
+ return TRUE;
+}
+
+/* Look up an info entry list from an info hash table. Return NULL
+ if there is none. */
+
+static struct info_list_node *
+lookup_info_hash_table (struct info_hash_table *hash_table, const char *key)
+{
+ struct info_hash_entry *entry;
+
+ entry = (struct info_hash_entry*) bfd_hash_lookup (&hash_table->base, key,
+ FALSE, FALSE);
+ return entry ? entry->head : NULL;
+}
+
+/* Read a section into its appropriate place in the dwarf2_debug
+ struct (indicated by SECTION_BUFFER and SECTION_SIZE). If SYMS is
+ not NULL, use bfd_simple_get_relocated_section_contents to read the
+ section contents, otherwise use bfd_get_section_contents. Fail if
+ the located section does not contain at least OFFSET bytes. */
+
+static bfd_boolean
+read_section (bfd * abfd,
+ const struct dwarf_debug_section *sec,
+ asymbol ** syms,
+ bfd_uint64_t offset,
+ bfd_byte ** section_buffer,
+ bfd_size_type * section_size)
+{
+ asection *msec;
+ const char *section_name = sec->uncompressed_name;
+
+ /* The section may have already been read. */
+ if (*section_buffer == NULL)
+ {
+ msec = bfd_get_section_by_name (abfd, section_name);
+ if (! msec)
+ {
+ section_name = sec->compressed_name;
+ if (section_name != NULL)
+ msec = bfd_get_section_by_name (abfd, section_name);
+ }
+ if (! msec)
+ {
+ (*_bfd_error_handler) (_("Dwarf Error: Can't find %s section."),
+ sec->uncompressed_name);
+ bfd_set_error (bfd_error_bad_value);
+ return FALSE;
+ }
+
+ *section_size = msec->rawsize ? msec->rawsize : msec->size;
+ if (syms)
+ {
+ *section_buffer
+ = bfd_simple_get_relocated_section_contents (abfd, msec, NULL, syms);
+ if (! *section_buffer)
+ return FALSE;
+ }
+ else
+ {
+ *section_buffer = (bfd_byte *) bfd_malloc (*section_size);
+ if (! *section_buffer)
+ return FALSE;
+ if (! bfd_get_section_contents (abfd, msec, *section_buffer,
+ 0, *section_size))
+ return FALSE;
+ }
+ }
+
+ /* It is possible to get a bad value for the offset into the section
+ that the client wants. Validate it here to avoid trouble later. */
+ if (offset != 0 && offset >= *section_size)
+ {
+ (*_bfd_error_handler) (_("Dwarf Error: Offset (%lu)"
+ " greater than or equal to %s size (%lu)."),
+ (long) offset, section_name, *section_size);
+ bfd_set_error (bfd_error_bad_value);
+ return FALSE;
+ }
+
+ return TRUE;
+}
+
/* VERBATIM
The following function up to the END VERBATIM mark are
copied directly from dwarf2read.c. */
bfd_byte *buf,
unsigned int size ATTRIBUTE_UNUSED)
{
- /* If the size of a host char is 8 bits, we can return a pointer
- to the buffer, otherwise we have to copy the data to a buffer
- allocated on the temporary obstack. */
return buf;
}
{
/* Return a pointer to the embedded string. */
char *str = (char *) buf;
+
if (*str == '\0')
{
*bytes_read_ptr = 1;
return str;
}
+/* END VERBATIM */
+
static char *
-read_indirect_string (struct comp_unit* unit,
- bfd_byte *buf,
- unsigned int *bytes_read_ptr)
+read_indirect_string (struct comp_unit * unit,
+ bfd_byte * buf,
+ unsigned int * bytes_read_ptr)
{
bfd_uint64_t offset;
struct dwarf2_debug *stash = unit->stash;
offset = read_4_bytes (unit->abfd, buf);
else
offset = read_8_bytes (unit->abfd, buf);
+
*bytes_read_ptr = unit->offset_size;
- if (! stash->dwarf_str_buffer)
- {
- asection *msec;
- bfd *abfd = unit->abfd;
- bfd_size_type sz;
+ if (! read_section (unit->abfd, &stash->debug_sections[debug_str],
+ stash->syms, offset,
+ &stash->dwarf_str_buffer, &stash->dwarf_str_size))
+ return NULL;
- msec = bfd_get_section_by_name (abfd, ".debug_str");
- if (! msec)
- {
- (*_bfd_error_handler)
- (_("Dwarf Error: Can't find .debug_str section."));
- bfd_set_error (bfd_error_bad_value);
- return NULL;
- }
+ str = (char *) stash->dwarf_str_buffer + offset;
+ if (*str == '\0')
+ return NULL;
+ return str;
+}
- sz = msec->rawsize ? msec->rawsize : msec->size;
- stash->dwarf_str_size = sz;
- stash->dwarf_str_buffer = bfd_alloc (abfd, sz);
- if (! stash->dwarf_str_buffer)
- return NULL;
+/* Like read_indirect_string but uses a .debug_str located in
+ an alternate file pointed to by the .gnu_debugaltlink section.
+ Used to impement DW_FORM_GNU_strp_alt. */
- if (! bfd_get_section_contents (abfd, msec, stash->dwarf_str_buffer,
- 0, sz))
- return NULL;
- }
+static char *
+read_alt_indirect_string (struct comp_unit * unit,
+ bfd_byte * buf,
+ unsigned int * bytes_read_ptr)
+{
+ bfd_uint64_t offset;
+ struct dwarf2_debug *stash = unit->stash;
+ char *str;
+
+ if (unit->offset_size == 4)
+ offset = read_4_bytes (unit->abfd, buf);
+ else
+ offset = read_8_bytes (unit->abfd, buf);
+
+ *bytes_read_ptr = unit->offset_size;
- if (offset >= stash->dwarf_str_size)
+ if (stash->alt_bfd_ptr == NULL)
{
- (*_bfd_error_handler) (_("Dwarf Error: DW_FORM_strp offset (%lu) greater than or equal to .debug_str size (%lu)."),
- (unsigned long) offset, stash->dwarf_str_size);
- bfd_set_error (bfd_error_bad_value);
- return NULL;
+ bfd * debug_bfd;
+ char * debug_filename = bfd_follow_gnu_debugaltlink (unit->abfd, DEBUGDIR);
+
+ if (debug_filename == NULL)
+ return NULL;
+
+ if ((debug_bfd = bfd_openr (debug_filename, NULL)) == NULL
+ || ! bfd_check_format (debug_bfd, bfd_object))
+ {
+ if (debug_bfd)
+ bfd_close (debug_bfd);
+
+ /* FIXME: Should we report our failure to follow the debuglink ? */
+ free (debug_filename);
+ return NULL;
+ }
+ stash->alt_bfd_ptr = debug_bfd;
}
+
+ if (! read_section (unit->stash->alt_bfd_ptr,
+ stash->debug_sections + debug_str_alt,
+ NULL, /* FIXME: Do we need to load alternate symbols ? */
+ offset,
+ &stash->alt_dwarf_str_buffer,
+ &stash->alt_dwarf_str_size))
+ return NULL;
- str = (char *) stash->dwarf_str_buffer + offset;
+ str = (char *) stash->alt_dwarf_str_buffer + offset;
if (*str == '\0')
return NULL;
+
return str;
}
-/* END VERBATIM */
+/* Resolve an alternate reference from UNIT at OFFSET.
+ Returns a pointer into the loaded alternate CU upon success
+ or NULL upon failure. */
+
+static bfd_byte *
+read_alt_indirect_ref (struct comp_unit * unit,
+ bfd_uint64_t offset)
+{
+ struct dwarf2_debug *stash = unit->stash;
+
+ if (stash->alt_bfd_ptr == NULL)
+ {
+ bfd * debug_bfd;
+ char * debug_filename = bfd_follow_gnu_debugaltlink (unit->abfd, DEBUGDIR);
+
+ if (debug_filename == NULL)
+ return FALSE;
+
+ if ((debug_bfd = bfd_openr (debug_filename, NULL)) == NULL
+ || ! bfd_check_format (debug_bfd, bfd_object))
+ {
+ if (debug_bfd)
+ bfd_close (debug_bfd);
+
+ /* FIXME: Should we report our failure to follow the debuglink ? */
+ free (debug_filename);
+ return NULL;
+ }
+ stash->alt_bfd_ptr = debug_bfd;
+ }
+
+ if (! read_section (unit->stash->alt_bfd_ptr,
+ stash->debug_sections + debug_info_alt,
+ NULL, /* FIXME: Do we need to load alternate symbols ? */
+ offset,
+ &stash->alt_dwarf_info_buffer,
+ &stash->alt_dwarf_info_size))
+ return NULL;
+
+ return stash->alt_dwarf_info_buffer + offset;
+}
static bfd_uint64_t
read_address (struct comp_unit *unit, bfd_byte *buf)
{
- int signed_vma = get_elf_backend_data (unit->abfd)->sign_extend_vma;
+ int signed_vma = 0;
+
+ if (bfd_get_flavour (unit->abfd) == bfd_target_elf_flavour)
+ signed_vma = get_elf_backend_data (unit->abfd)->sign_extend_vma;
if (signed_vma)
{
unsigned int abbrev_form, hash_number;
bfd_size_type amt;
- if (! stash->dwarf_abbrev_buffer)
- {
- asection *msec;
-
- msec = bfd_get_section_by_name (abfd, ".debug_abbrev");
- if (! msec)
- {
- (*_bfd_error_handler) (_("Dwarf Error: Can't find .debug_abbrev section."));
- bfd_set_error (bfd_error_bad_value);
- return 0;
- }
-
- stash->dwarf_abbrev_size = msec->size;
- stash->dwarf_abbrev_buffer
- = bfd_simple_get_relocated_section_contents (abfd, msec, NULL,
- stash->syms);
- if (! stash->dwarf_abbrev_buffer)
- return 0;
- }
-
- if (offset >= stash->dwarf_abbrev_size)
- {
- (*_bfd_error_handler) (_("Dwarf Error: Abbrev offset (%lu) greater than or equal to .debug_abbrev size (%lu)."),
- (unsigned long) offset, stash->dwarf_abbrev_size);
- bfd_set_error (bfd_error_bad_value);
- return 0;
- }
+ if (! read_section (abfd, &stash->debug_sections[debug_abbrev],
+ stash->syms, offset,
+ &stash->dwarf_abbrev_buffer, &stash->dwarf_abbrev_size))
+ return NULL;
amt = sizeof (struct abbrev_info*) * ABBREV_HASH_SIZE;
- abbrevs = bfd_zalloc (abfd, amt);
+ abbrevs = (struct abbrev_info **) bfd_zalloc (abfd, amt);
+ if (abbrevs == NULL)
+ return NULL;
abbrev_ptr = stash->dwarf_abbrev_buffer + offset;
abbrev_number = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
while (abbrev_number)
{
amt = sizeof (struct abbrev_info);
- cur_abbrev = bfd_zalloc (abfd, amt);
+ cur_abbrev = (struct abbrev_info *) bfd_zalloc (abfd, amt);
+ if (cur_abbrev == NULL)
+ return NULL;
/* Read in abbrev header. */
cur_abbrev->number = abbrev_number;
amt = cur_abbrev->num_attrs + ATTR_ALLOC_CHUNK;
amt *= sizeof (struct attr_abbrev);
- tmp = bfd_realloc (cur_abbrev->attrs, amt);
+ tmp = (struct attr_abbrev *) bfd_realloc (cur_abbrev->attrs, amt);
if (tmp == NULL)
- {
- size_t i;
-
- for (i = 0; i < ABBREV_HASH_SIZE; i++)
- {
- struct abbrev_info *abbrev = abbrevs[i];
-
- while (abbrev)
- {
- free (abbrev->attrs);
- abbrev = abbrev->next;
- }
- }
- return NULL;
- }
+ {
+ size_t i;
+
+ for (i = 0; i < ABBREV_HASH_SIZE; i++)
+ {
+ struct abbrev_info *abbrev = abbrevs[i];
+
+ while (abbrev)
+ {
+ free (abbrev->attrs);
+ abbrev = abbrev->next;
+ }
+ }
+ return NULL;
+ }
cur_abbrev->attrs = tmp;
}
for the next compile unit) or if the end of the abbreviation
table is reached. */
if ((unsigned int) (abbrev_ptr - stash->dwarf_abbrev_buffer)
- >= stash->dwarf_abbrev_size)
+ >= stash->dwarf_abbrev_size)
break;
abbrev_number = read_unsigned_leb128 (abfd, abbrev_ptr, &bytes_read);
abbrev_ptr += bytes_read;
return abbrevs;
}
+/* Returns true if the form is one which has a string value. */
+
+static inline bfd_boolean
+is_str_attr (enum dwarf_form form)
+{
+ return form == DW_FORM_string || form == DW_FORM_strp || form == DW_FORM_GNU_strp_alt;
+}
+
/* Read an attribute value described by an attribute form. */
static bfd_byte *
switch (form)
{
- case DW_FORM_addr:
- /* FIXME: DWARF3 draft says DW_FORM_ref_addr is offset_size. */
case DW_FORM_ref_addr:
+ /* DW_FORM_ref_addr is an address in DWARF2, and an offset in
+ DWARF3. */
+ if (unit->version == 3 || unit->version == 4)
+ {
+ if (unit->offset_size == 4)
+ attr->u.val = read_4_bytes (unit->abfd, info_ptr);
+ else
+ attr->u.val = read_8_bytes (unit->abfd, info_ptr);
+ info_ptr += unit->offset_size;
+ break;
+ }
+ /* FALLTHROUGH */
+ case DW_FORM_addr:
attr->u.val = read_address (unit, info_ptr);
info_ptr += unit->addr_size;
break;
+ case DW_FORM_GNU_ref_alt:
+ case DW_FORM_sec_offset:
+ if (unit->offset_size == 4)
+ attr->u.val = read_4_bytes (unit->abfd, info_ptr);
+ else
+ attr->u.val = read_8_bytes (unit->abfd, info_ptr);
+ info_ptr += unit->offset_size;
+ break;
case DW_FORM_block2:
amt = sizeof (struct dwarf_block);
- blk = bfd_alloc (abfd, amt);
+ blk = (struct dwarf_block *) bfd_alloc (abfd, amt);
+ if (blk == NULL)
+ return NULL;
blk->size = read_2_bytes (abfd, info_ptr);
info_ptr += 2;
blk->data = read_n_bytes (abfd, info_ptr, blk->size);
break;
case DW_FORM_block4:
amt = sizeof (struct dwarf_block);
- blk = bfd_alloc (abfd, amt);
+ blk = (struct dwarf_block *) bfd_alloc (abfd, amt);
+ if (blk == NULL)
+ return NULL;
blk->size = read_4_bytes (abfd, info_ptr);
info_ptr += 4;
blk->data = read_n_bytes (abfd, info_ptr, blk->size);
attr->u.str = read_indirect_string (unit, info_ptr, &bytes_read);
info_ptr += bytes_read;
break;
+ case DW_FORM_GNU_strp_alt:
+ attr->u.str = read_alt_indirect_string (unit, info_ptr, &bytes_read);
+ info_ptr += bytes_read;
+ break;
+ case DW_FORM_exprloc:
case DW_FORM_block:
amt = sizeof (struct dwarf_block);
- blk = bfd_alloc (abfd, amt);
+ blk = (struct dwarf_block *) bfd_alloc (abfd, amt);
+ if (blk == NULL)
+ return NULL;
blk->size = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
info_ptr += bytes_read;
blk->data = read_n_bytes (abfd, info_ptr, blk->size);
break;
case DW_FORM_block1:
amt = sizeof (struct dwarf_block);
- blk = bfd_alloc (abfd, amt);
+ blk = (struct dwarf_block *) bfd_alloc (abfd, amt);
+ if (blk == NULL)
+ return NULL;
blk->size = read_1_byte (abfd, info_ptr);
info_ptr += 1;
blk->data = read_n_bytes (abfd, info_ptr, blk->size);
attr->u.val = read_1_byte (abfd, info_ptr);
info_ptr += 1;
break;
+ case DW_FORM_flag_present:
+ attr->u.val = 1;
+ break;
case DW_FORM_sdata:
attr->u.sval = read_signed_leb128 (abfd, info_ptr, &bytes_read);
info_ptr += bytes_read;
attr->u.val = read_8_bytes (abfd, info_ptr);
info_ptr += 8;
break;
+ case DW_FORM_ref_sig8:
+ attr->u.val = read_8_bytes (abfd, info_ptr);
+ info_ptr += 8;
+ break;
case DW_FORM_ref_udata:
attr->u.val = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
info_ptr += bytes_read;
info_ptr = read_attribute_value (attr, form, unit, info_ptr);
break;
default:
- (*_bfd_error_handler) (_("Dwarf Error: Invalid or unhandled FORM value: %u."),
+ (*_bfd_error_handler) (_("Dwarf Error: Invalid or unhandled FORM value: %#x."),
form);
bfd_set_error (bfd_error_bad_value);
+ return NULL;
}
return info_ptr;
}
char *filename;
unsigned int line;
unsigned int column;
- int end_sequence; /* End of (sequential) code sequence. */
+ unsigned int discriminator;
+ unsigned char op_index;
+ unsigned char end_sequence; /* End of (sequential) code sequence. */
};
struct fileinfo
unsigned int size;
};
+struct line_sequence
+{
+ bfd_vma low_pc;
+ struct line_sequence* prev_sequence;
+ struct line_info* last_line; /* Largest VMA. */
+};
+
struct line_info_table
{
- bfd* abfd;
- unsigned int num_files;
- unsigned int num_dirs;
- char *comp_dir;
- char **dirs;
- struct fileinfo* files;
- struct line_info* last_line; /* largest VMA */
- struct line_info* lcl_head; /* local head; used in 'add_line_info' */
+ bfd* abfd;
+ unsigned int num_files;
+ unsigned int num_dirs;
+ unsigned int num_sequences;
+ char * comp_dir;
+ char ** dirs;
+ struct fileinfo* files;
+ struct line_sequence* sequences;
+ struct line_info* lcl_head; /* Local head; used in 'add_line_info'. */
};
/* Remember some information about each function. If the function is
inlined (DW_TAG_inlined_subroutine) it may have two additional
attributes, DW_AT_call_file and DW_AT_call_line, which specify the
- source code location where this function was inlined. */
+ source code location where this function was inlined. */
struct funcinfo
{
- struct funcinfo *prev_func; /* Pointer to previous function in list of all functions */
- struct funcinfo *caller_func; /* Pointer to function one scope higher */
- char *caller_file; /* Source location file name where caller_func inlines this func */
- int caller_line; /* Source location line number where caller_func inlines this func */
- char *file; /* Source location file name */
- int line; /* Source location line number */
+ /* Pointer to previous function in list of all functions. */
+ struct funcinfo *prev_func;
+ /* Pointer to function one scope higher. */
+ struct funcinfo *caller_func;
+ /* Source location file name where caller_func inlines this func. */
+ char *caller_file;
+ /* Source location line number where caller_func inlines this func. */
+ int caller_line;
+ /* Source location file name. */
+ char *file;
+ /* Source location line number. */
+ int line;
int tag;
- int nesting_level;
char *name;
struct arange arange;
- asection *sec; /* Where the symbol is defined */
+ /* Where the symbol is defined. */
+ asection *sec;
};
struct varinfo
unsigned int stack: 1;
};
+/* Return TRUE if NEW_LINE should sort after LINE. */
+
+static inline bfd_boolean
+new_line_sorts_after (struct line_info *new_line, struct line_info *line)
+{
+ return (new_line->address > line->address
+ || (new_line->address == line->address
+ && (new_line->op_index > line->op_index
+ || (new_line->op_index == line->op_index
+ && new_line->end_sequence < line->end_sequence))));
+}
+
+
/* Adds a new entry to the line_info list in the line_info_table, ensuring
that the list is sorted. Note that the line_info list is sorted from
highest to lowest VMA (with possible duplicates); that is,
line_info->prev_line always accesses an equal or smaller VMA. */
-static void
+static bfd_boolean
add_line_info (struct line_info_table *table,
bfd_vma address,
+ unsigned char op_index,
char *filename,
unsigned int line,
unsigned int column,
+ unsigned int discriminator,
int end_sequence)
{
bfd_size_type amt = sizeof (struct line_info);
- struct line_info* info = bfd_alloc (table->abfd, amt);
+ struct line_sequence* seq = table->sequences;
+ struct line_info* info = (struct line_info *) bfd_alloc (table->abfd, amt);
+
+ if (info == NULL)
+ return FALSE;
+
+ /* Set member data of 'info'. */
+ info->prev_line = NULL;
+ info->address = address;
+ info->op_index = op_index;
+ info->line = line;
+ info->column = column;
+ info->discriminator = discriminator;
+ info->end_sequence = end_sequence;
+
+ if (filename && filename[0])
+ {
+ info->filename = (char *) bfd_alloc (table->abfd, strlen (filename) + 1);
+ if (info->filename == NULL)
+ return FALSE;
+ strcpy (info->filename, filename);
+ }
+ else
+ info->filename = NULL;
/* Find the correct location for 'info'. Normally we will receive
new line_info data 1) in order and 2) with increasing VMAs.
p...z a...j (where a < j < p < z)
Note: table->lcl_head is used to head an *actual* or *possible*
- sequence within the list (such as a...j) that is not directly
+ sub-sequence within the list (such as a...j) that is not directly
headed by table->last_line
Note: we may receive duplicate entries from 'decode_line_info'. */
- while (1)
- if (!table->last_line
- || address >= table->last_line->address)
- {
- /* Normal case: add 'info' to the beginning of the list */
- info->prev_line = table->last_line;
- table->last_line = info;
-
- /* lcl_head: initialize to head a *possible* sequence at the end. */
- if (!table->lcl_head)
- table->lcl_head = info;
- break;
- }
- else if (!table->lcl_head->prev_line
- && table->lcl_head->address > address)
- {
- /* Abnormal but easy: lcl_head is 1) at the *end* of the line
- list and 2) the head of 'info'. */
- info->prev_line = NULL;
- table->lcl_head->prev_line = info;
- break;
- }
- else if (table->lcl_head->prev_line
- && table->lcl_head->address > address
- && address >= table->lcl_head->prev_line->address)
- {
- /* Abnormal but easy: lcl_head is 1) in the *middle* of the line
- list and 2) the head of 'info'. */
- info->prev_line = table->lcl_head->prev_line;
- table->lcl_head->prev_line = info;
- break;
- }
- else
- {
- /* Abnormal and hard: Neither 'last_line' nor 'lcl_head' are valid
- heads for 'info'. Reset 'lcl_head' and repeat. */
- struct line_info* li2 = table->last_line; /* always non-NULL */
- struct line_info* li1 = li2->prev_line;
-
- while (li1)
- {
- if (li2->address > address && address >= li1->address)
- break;
-
- li2 = li1; /* always non-NULL */
- li1 = li1->prev_line;
- }
- table->lcl_head = li2;
- }
-
- /* Set member data of 'info'. */
- info->address = address;
- info->line = line;
- info->column = column;
- info->end_sequence = end_sequence;
+ if (seq
+ && seq->last_line->address == address
+ && seq->last_line->op_index == op_index
+ && seq->last_line->end_sequence == end_sequence)
+ {
+ /* We only keep the last entry with the same address and end
+ sequence. See PR ld/4986. */
+ if (table->lcl_head == seq->last_line)
+ table->lcl_head = info;
+ info->prev_line = seq->last_line->prev_line;
+ seq->last_line = info;
+ }
+ else if (!seq || seq->last_line->end_sequence)
+ {
+ /* Start a new line sequence. */
+ amt = sizeof (struct line_sequence);
+ seq = (struct line_sequence *) bfd_malloc (amt);
+ if (seq == NULL)
+ return FALSE;
+ seq->low_pc = address;
+ seq->prev_sequence = table->sequences;
+ seq->last_line = info;
+ table->lcl_head = info;
+ table->sequences = seq;
+ table->num_sequences++;
+ }
+ else if (new_line_sorts_after (info, seq->last_line))
+ {
+ /* Normal case: add 'info' to the beginning of the current sequence. */
+ info->prev_line = seq->last_line;
+ seq->last_line = info;
- if (filename && filename[0])
+ /* lcl_head: initialize to head a *possible* sequence at the end. */
+ if (!table->lcl_head)
+ table->lcl_head = info;
+ }
+ else if (!new_line_sorts_after (info, table->lcl_head)
+ && (!table->lcl_head->prev_line
+ || new_line_sorts_after (info, table->lcl_head->prev_line)))
{
- info->filename = bfd_alloc (table->abfd, strlen (filename) + 1);
- if (info->filename)
- strcpy (info->filename, filename);
+ /* Abnormal but easy: lcl_head is the head of 'info'. */
+ info->prev_line = table->lcl_head->prev_line;
+ table->lcl_head->prev_line = info;
}
else
- info->filename = NULL;
+ {
+ /* Abnormal and hard: Neither 'last_line' nor 'lcl_head'
+ are valid heads for 'info'. Reset 'lcl_head'. */
+ struct line_info* li2 = seq->last_line; /* Always non-NULL. */
+ struct line_info* li1 = li2->prev_line;
+
+ while (li1)
+ {
+ if (!new_line_sorts_after (info, li2)
+ && new_line_sorts_after (info, li1))
+ break;
+
+ li2 = li1; /* always non-NULL */
+ li1 = li1->prev_line;
+ }
+ table->lcl_head = li2;
+ info->prev_line = table->lcl_head->prev_line;
+ table->lcl_head->prev_line = info;
+ if (address < seq->low_pc)
+ seq->low_pc = address;
+ }
+ return TRUE;
}
/* Extract a fully qualified filename from a line info table.
if (file - 1 >= table->num_files)
{
- (*_bfd_error_handler)
- (_("Dwarf Error: mangled line number section (bad file number)."));
+ /* FILE == 0 means unknown. */
+ if (file)
+ (*_bfd_error_handler)
+ (_("Dwarf Error: mangled line number section (bad file number)."));
return strdup ("<unknown>");
}
filename = table->files[file - 1].name;
- if (! IS_ABSOLUTE_PATH (filename))
+ if (!IS_ABSOLUTE_PATH (filename))
{
- char *dirname = (table->files[file - 1].dir
- ? table->dirs[table->files[file - 1].dir - 1]
- : table->comp_dir);
+ char *dir_name = NULL;
+ char *subdir_name = NULL;
+ char *name;
+ size_t len;
+
+ if (table->files[file - 1].dir)
+ subdir_name = table->dirs[table->files[file - 1].dir - 1];
- /* Not all tools set DW_AT_comp_dir, so dirname may be unknown.
- The best we can do is return the filename part. */
- if (dirname != NULL)
+ if (!subdir_name || !IS_ABSOLUTE_PATH (subdir_name))
+ dir_name = table->comp_dir;
+
+ if (!dir_name)
{
- unsigned int len = strlen (dirname) + strlen (filename) + 2;
- char * name;
+ dir_name = subdir_name;
+ subdir_name = NULL;
+ }
- name = bfd_malloc (len);
+ if (!dir_name)
+ return strdup (filename);
+
+ len = strlen (dir_name) + strlen (filename) + 2;
+
+ if (subdir_name)
+ {
+ len += strlen (subdir_name) + 1;
+ name = (char *) bfd_malloc (len);
if (name)
- sprintf (name, "%s/%s", dirname, filename);
- return name;
+ sprintf (name, "%s/%s/%s", dir_name, subdir_name, filename);
}
+ else
+ {
+ name = (char *) bfd_malloc (len);
+ if (name)
+ sprintf (name, "%s/%s", dir_name, filename);
+ }
+
+ return name;
}
return strdup (filename);
}
-static void
-arange_add (bfd *abfd, struct arange *first_arange, bfd_vma low_pc, bfd_vma high_pc)
+static bfd_boolean
+arange_add (const struct comp_unit *unit, struct arange *first_arange,
+ bfd_vma low_pc, bfd_vma high_pc)
{
struct arange *arange;
- /* If the first arange is empty, use it. */
+ /* Ignore empty ranges. */
+ if (low_pc == high_pc)
+ return TRUE;
+
+ /* If the first arange is empty, use it. */
if (first_arange->high == 0)
{
first_arange->low = low_pc;
first_arange->high = high_pc;
- return;
+ return TRUE;
}
/* Next see if we can cheaply extend an existing range. */
if (low_pc == arange->high)
{
arange->high = high_pc;
- return;
+ return TRUE;
}
if (high_pc == arange->low)
{
arange->low = low_pc;
- return;
+ return TRUE;
}
arange = arange->next;
}
/* Need to allocate a new arange and insert it into the arange list.
Order isn't significant, so just insert after the first arange. */
- arange = bfd_zalloc (abfd, sizeof (*arange));
+ arange = (struct arange *) bfd_alloc (unit->abfd, sizeof (*arange));
+ if (arange == NULL)
+ return FALSE;
arange->low = low_pc;
arange->high = high_pc;
arange->next = first_arange->next;
first_arange->next = arange;
+ return TRUE;
+}
+
+/* Compare function for line sequences. */
+
+static int
+compare_sequences (const void* a, const void* b)
+{
+ const struct line_sequence* seq1 = a;
+ const struct line_sequence* seq2 = b;
+
+ /* Sort by low_pc as the primary key. */
+ if (seq1->low_pc < seq2->low_pc)
+ return -1;
+ if (seq1->low_pc > seq2->low_pc)
+ return 1;
+
+ /* If low_pc values are equal, sort in reverse order of
+ high_pc, so that the largest region comes first. */
+ if (seq1->last_line->address < seq2->last_line->address)
+ return 1;
+ if (seq1->last_line->address > seq2->last_line->address)
+ return -1;
+
+ if (seq1->last_line->op_index < seq2->last_line->op_index)
+ return 1;
+ if (seq1->last_line->op_index > seq2->last_line->op_index)
+ return -1;
+
+ return 0;
+}
+
+/* Sort the line sequences for quick lookup. */
+
+static bfd_boolean
+sort_line_sequences (struct line_info_table* table)
+{
+ bfd_size_type amt;
+ struct line_sequence* sequences;
+ struct line_sequence* seq;
+ unsigned int n = 0;
+ unsigned int num_sequences = table->num_sequences;
+ bfd_vma last_high_pc;
+
+ if (num_sequences == 0)
+ return TRUE;
+
+ /* Allocate space for an array of sequences. */
+ amt = sizeof (struct line_sequence) * num_sequences;
+ sequences = (struct line_sequence *) bfd_alloc (table->abfd, amt);
+ if (sequences == NULL)
+ return FALSE;
+
+ /* Copy the linked list into the array, freeing the original nodes. */
+ seq = table->sequences;
+ for (n = 0; n < num_sequences; n++)
+ {
+ struct line_sequence* last_seq = seq;
+
+ BFD_ASSERT (seq);
+ sequences[n].low_pc = seq->low_pc;
+ sequences[n].prev_sequence = NULL;
+ sequences[n].last_line = seq->last_line;
+ seq = seq->prev_sequence;
+ free (last_seq);
+ }
+ BFD_ASSERT (seq == NULL);
+
+ qsort (sequences, n, sizeof (struct line_sequence), compare_sequences);
+
+ /* Make the list binary-searchable by trimming overlapping entries
+ and removing nested entries. */
+ num_sequences = 1;
+ last_high_pc = sequences[0].last_line->address;
+ for (n = 1; n < table->num_sequences; n++)
+ {
+ if (sequences[n].low_pc < last_high_pc)
+ {
+ if (sequences[n].last_line->address <= last_high_pc)
+ /* Skip nested entries. */
+ continue;
+
+ /* Trim overlapping entries. */
+ sequences[n].low_pc = last_high_pc;
+ }
+ last_high_pc = sequences[n].last_line->address;
+ if (n > num_sequences)
+ {
+ /* Close up the gap. */
+ sequences[num_sequences].low_pc = sequences[n].low_pc;
+ sequences[num_sequences].last_line = sequences[n].last_line;
+ }
+ num_sequences++;
+ }
+
+ table->sequences = sequences;
+ table->num_sequences = num_sequences;
+ return TRUE;
}
/* Decode the line number information for UNIT. */
unsigned int i, bytes_read, offset_size;
char *cur_file, *cur_dir;
unsigned char op_code, extended_op, adj_opcode;
+ unsigned int exop_len;
bfd_size_type amt;
- if (! stash->dwarf_line_buffer)
- {
- asection *msec;
-
- msec = bfd_get_section_by_name (abfd, ".debug_line");
- if (! msec)
- {
- (*_bfd_error_handler) (_("Dwarf Error: Can't find .debug_line section."));
- bfd_set_error (bfd_error_bad_value);
- return 0;
- }
-
- stash->dwarf_line_size = msec->size;
- stash->dwarf_line_buffer
- = bfd_simple_get_relocated_section_contents (abfd, msec, NULL,
- stash->syms);
- if (! stash->dwarf_line_buffer)
- return 0;
- }
-
- /* It is possible to get a bad value for the line_offset. Validate
- it here so that we won't get a segfault below. */
- if (unit->line_offset >= stash->dwarf_line_size)
- {
- (*_bfd_error_handler) (_("Dwarf Error: Line offset (%lu) greater than or equal to .debug_line size (%lu)."),
- unit->line_offset, stash->dwarf_line_size);
- bfd_set_error (bfd_error_bad_value);
- return 0;
- }
+ if (! read_section (abfd, &stash->debug_sections[debug_line],
+ stash->syms, unit->line_offset,
+ &stash->dwarf_line_buffer, &stash->dwarf_line_size))
+ return NULL;
amt = sizeof (struct line_info_table);
- table = bfd_alloc (abfd, amt);
+ table = (struct line_info_table *) bfd_alloc (abfd, amt);
+ if (table == NULL)
+ return NULL;
table->abfd = abfd;
table->comp_dir = unit->comp_dir;
table->num_dirs = 0;
table->dirs = NULL;
- table->files = NULL;
- table->last_line = NULL;
+ table->num_sequences = 0;
+ table->sequences = NULL;
+
table->lcl_head = NULL;
line_ptr = stash->dwarf_line_buffer + unit->line_offset;
}
line_end = line_ptr + lh.total_length;
lh.version = read_2_bytes (abfd, line_ptr);
+ if (lh.version < 2 || lh.version > 4)
+ {
+ (*_bfd_error_handler)
+ (_("Dwarf Error: Unhandled .debug_line version %d."), lh.version);
+ bfd_set_error (bfd_error_bad_value);
+ return NULL;
+ }
line_ptr += 2;
if (offset_size == 4)
lh.prologue_length = read_4_bytes (abfd, line_ptr);
line_ptr += offset_size;
lh.minimum_instruction_length = read_1_byte (abfd, line_ptr);
line_ptr += 1;
+ if (lh.version >= 4)
+ {
+ lh.maximum_ops_per_insn = read_1_byte (abfd, line_ptr);
+ line_ptr += 1;
+ }
+ else
+ lh.maximum_ops_per_insn = 1;
+ if (lh.maximum_ops_per_insn == 0)
+ {
+ (*_bfd_error_handler)
+ (_("Dwarf Error: Invalid maximum operations per instruction."));
+ bfd_set_error (bfd_error_bad_value);
+ return NULL;
+ }
lh.default_is_stmt = read_1_byte (abfd, line_ptr);
line_ptr += 1;
lh.line_base = read_1_signed_byte (abfd, line_ptr);
lh.opcode_base = read_1_byte (abfd, line_ptr);
line_ptr += 1;
amt = lh.opcode_base * sizeof (unsigned char);
- lh.standard_opcode_lengths = bfd_alloc (abfd, amt);
+ lh.standard_opcode_lengths = (unsigned char *) bfd_alloc (abfd, amt);
lh.standard_opcode_lengths[0] = 1;
amt = table->num_dirs + DIR_ALLOC_CHUNK;
amt *= sizeof (char *);
- tmp = bfd_realloc (table->dirs, amt);
+ tmp = (char **) bfd_realloc (table->dirs, amt);
if (tmp == NULL)
- {
- free (table->dirs);
- return NULL;
- }
+ goto fail;
table->dirs = tmp;
}
amt = table->num_files + FILE_ALLOC_CHUNK;
amt *= sizeof (struct fileinfo);
- tmp = bfd_realloc (table->files, amt);
+ tmp = (struct fileinfo *) bfd_realloc (table->files, amt);
if (tmp == NULL)
- {
- free (table->files);
- free (table->dirs);
- return NULL;
- }
+ goto fail;
table->files = tmp;
}
{
/* State machine registers. */
bfd_vma address = 0;
+ unsigned char op_index = 0;
char * filename = table->num_files ? concat_filename (table, 1) : NULL;
unsigned int line = 1;
unsigned int column = 0;
+ unsigned int discriminator = 0;
int is_stmt = lh.default_is_stmt;
- int basic_block = 0;
int end_sequence = 0;
/* eraxxon@alumni.rice.edu: Against the DWARF2 specs, some
compilers generate address sequences that are wildly out of
{
/* Special operand. */
adj_opcode = op_code - lh.opcode_base;
- address += (adj_opcode / lh.line_range)
- * lh.minimum_instruction_length;
+ if (lh.maximum_ops_per_insn == 1)
+ address += (adj_opcode / lh.line_range
+ * lh.minimum_instruction_length);
+ else
+ {
+ address += ((op_index + adj_opcode / lh.line_range)
+ / lh.maximum_ops_per_insn
+ * lh.minimum_instruction_length);
+ op_index = ((op_index + adj_opcode / lh.line_range)
+ % lh.maximum_ops_per_insn);
+ }
line += lh.line_base + (adj_opcode % lh.line_range);
/* Append row to matrix using current values. */
- add_line_info (table, address, filename, line, column, 0);
- basic_block = 1;
+ if (!add_line_info (table, address, op_index, filename,
+ line, column, discriminator, 0))
+ goto line_fail;
+ discriminator = 0;
if (address < low_pc)
low_pc = address;
if (address > high_pc)
else switch (op_code)
{
case DW_LNS_extended_op:
- /* Ignore length. */
- line_ptr += 1;
+ exop_len = read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ line_ptr += bytes_read;
extended_op = read_1_byte (abfd, line_ptr);
line_ptr += 1;
{
case DW_LNE_end_sequence:
end_sequence = 1;
- add_line_info (table, address, filename, line, column,
- end_sequence);
+ if (!add_line_info (table, address, op_index, filename, line,
+ column, discriminator, end_sequence))
+ goto line_fail;
+ discriminator = 0;
if (address < low_pc)
low_pc = address;
if (address > high_pc)
high_pc = address;
- arange_add (unit->abfd, &unit->arange, low_pc, high_pc);
+ if (!arange_add (unit, &unit->arange, low_pc, high_pc))
+ goto line_fail;
break;
case DW_LNE_set_address:
address = read_address (unit, line_ptr);
+ op_index = 0;
line_ptr += unit->addr_size;
break;
case DW_LNE_define_file:
amt = table->num_files + FILE_ALLOC_CHUNK;
amt *= sizeof (struct fileinfo);
- tmp = bfd_realloc (table->files, amt);
+ tmp = (struct fileinfo *) bfd_realloc (table->files, amt);
if (tmp == NULL)
- {
- free (table->files);
- free (table->dirs);
- free (filename);
- return NULL;
- }
+ goto line_fail;
table->files = tmp;
}
table->files[table->num_files].name = cur_file;
line_ptr += bytes_read;
table->num_files++;
break;
+ case DW_LNE_set_discriminator:
+ discriminator =
+ read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ line_ptr += bytes_read;
+ break;
+ case DW_LNE_HP_source_file_correlation:
+ line_ptr += exop_len - 1;
+ break;
default:
- (*_bfd_error_handler) (_("Dwarf Error: mangled line number section."));
+ (*_bfd_error_handler)
+ (_("Dwarf Error: mangled line number section."));
bfd_set_error (bfd_error_bad_value);
- free (filename);
- free (table->files);
- free (table->dirs);
- return NULL;
+ line_fail:
+ if (filename != NULL)
+ free (filename);
+ goto fail;
}
break;
case DW_LNS_copy:
- add_line_info (table, address, filename, line, column, 0);
- basic_block = 0;
+ if (!add_line_info (table, address, op_index,
+ filename, line, column, discriminator, 0))
+ goto line_fail;
+ discriminator = 0;
if (address < low_pc)
low_pc = address;
if (address > high_pc)
high_pc = address;
break;
case DW_LNS_advance_pc:
- address += lh.minimum_instruction_length
- * read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ if (lh.maximum_ops_per_insn == 1)
+ address += (lh.minimum_instruction_length
+ * read_unsigned_leb128 (abfd, line_ptr,
+ &bytes_read));
+ else
+ {
+ bfd_vma adjust = read_unsigned_leb128 (abfd, line_ptr,
+ &bytes_read);
+ address = ((op_index + adjust) / lh.maximum_ops_per_insn
+ * lh.minimum_instruction_length);
+ op_index = (op_index + adjust) % lh.maximum_ops_per_insn;
+ }
line_ptr += bytes_read;
break;
case DW_LNS_advance_line:
is_stmt = (!is_stmt);
break;
case DW_LNS_set_basic_block:
- basic_block = 1;
break;
case DW_LNS_const_add_pc:
- address += lh.minimum_instruction_length
- * ((255 - lh.opcode_base) / lh.line_range);
+ if (lh.maximum_ops_per_insn == 1)
+ address += (lh.minimum_instruction_length
+ * ((255 - lh.opcode_base) / lh.line_range));
+ else
+ {
+ bfd_vma adjust = ((255 - lh.opcode_base) / lh.line_range);
+ address += (lh.minimum_instruction_length
+ * ((op_index + adjust)
+ / lh.maximum_ops_per_insn));
+ op_index = (op_index + adjust) % lh.maximum_ops_per_insn;
+ }
break;
case DW_LNS_fixed_advance_pc:
address += read_2_bytes (abfd, line_ptr);
+ op_index = 0;
line_ptr += 2;
break;
default:
- {
- int i;
-
- /* Unknown standard opcode, ignore it. */
- for (i = 0; i < lh.standard_opcode_lengths[op_code]; i++)
- {
- (void) read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
- line_ptr += bytes_read;
- }
- }
+ /* Unknown standard opcode, ignore it. */
+ for (i = 0; i < lh.standard_opcode_lengths[op_code]; i++)
+ {
+ (void) read_unsigned_leb128 (abfd, line_ptr, &bytes_read);
+ line_ptr += bytes_read;
+ }
+ break;
}
}
free (filename);
}
- return table;
+ if (sort_line_sequences (table))
+ return table;
+
+ fail:
+ if (table->sequences != NULL)
+ free (table->sequences);
+ if (table->files != NULL)
+ free (table->files);
+ if (table->dirs != NULL)
+ free (table->dirs);
+ return NULL;
}
-/* If ADDR is within TABLE set the output parameters and return TRUE,
- otherwise return FALSE. The output parameters, FILENAME_PTR and
- LINENUMBER_PTR, are pointers to the objects to be filled in. */
+/* If ADDR is within TABLE set the output parameters and return the
+ range of addresses covered by the entry used to fill them out.
+ Otherwise set * FILENAME_PTR to NULL and return 0.
+ The parameters FILENAME_PTR, LINENUMBER_PTR and DISCRIMINATOR_PTR
+ are pointers to the objects to be filled in. */
-static bfd_boolean
+static bfd_vma
lookup_address_in_line_info_table (struct line_info_table *table,
bfd_vma addr,
- struct funcinfo *function,
const char **filename_ptr,
- unsigned int *linenumber_ptr)
+ unsigned int *linenumber_ptr,
+ unsigned int *discriminator_ptr)
{
- /* Note: table->last_line should be a descendingly sorted list. */
- struct line_info* next_line = table->last_line;
- struct line_info* each_line = NULL;
- *filename_ptr = NULL;
-
- if (!next_line)
- return FALSE;
-
- each_line = next_line->prev_line;
-
- /* Check for large addresses */
- if (addr > next_line->address)
- each_line = NULL; /* ensure we skip over the normal case */
-
- /* Normal case: search the list; save */
- while (each_line && next_line)
+ struct line_sequence *seq = NULL;
+ struct line_info *each_line;
+ int low, high, mid;
+
+ /* Binary search the array of sequences. */
+ low = 0;
+ high = table->num_sequences;
+ while (low < high)
{
- /* If we have an address match, save this info. This allows us
- to return as good as results as possible for strange debugging
- info. */
- bfd_boolean addr_match = FALSE;
- if (each_line->address <= addr && addr < next_line->address)
- {
- addr_match = TRUE;
-
- /* If this line appears to span functions, and addr is in the
- later function, return the first line of that function instead
- of the last line of the earlier one. This check is for GCC
- 2.95, which emits the first line number for a function late. */
-
- if (function != NULL)
- {
- bfd_vma lowest_pc;
- struct arange *arange;
-
- /* Find the lowest address in the function's range list */
- lowest_pc = function->arange.low;
- for (arange = &function->arange;
- arange;
- arange = arange->next)
- {
- if (function->arange.low < lowest_pc)
- lowest_pc = function->arange.low;
- }
- /* Check for spanning function and set outgoing line info */
- if (addr >= lowest_pc
- && each_line->address < lowest_pc
- && next_line->address > lowest_pc)
- {
- *filename_ptr = next_line->filename;
- *linenumber_ptr = next_line->line;
- }
- else
- {
- *filename_ptr = each_line->filename;
- *linenumber_ptr = each_line->line;
- }
- }
- else
- {
- *filename_ptr = each_line->filename;
- *linenumber_ptr = each_line->line;
- }
- }
-
- if (addr_match && !each_line->end_sequence)
- return TRUE; /* we have definitely found what we want */
-
- next_line = each_line;
- each_line = each_line->prev_line;
+ mid = (low + high) / 2;
+ seq = &table->sequences[mid];
+ if (addr < seq->low_pc)
+ high = mid;
+ else if (addr >= seq->last_line->address)
+ low = mid + 1;
+ else
+ break;
}
- /* At this point each_line is NULL but next_line is not. If we found
- a candidate end-of-sequence point in the loop above, we can return
- that (compatibility with a bug in the Intel compiler); otherwise,
- assuming that we found the containing function for this address in
- this compilation unit, return the first line we have a number for
- (compatibility with GCC 2.95). */
- if (*filename_ptr == NULL && function != NULL)
+ if (seq && addr >= seq->low_pc && addr < seq->last_line->address)
{
- *filename_ptr = next_line->filename;
- *linenumber_ptr = next_line->line;
- return TRUE;
+ /* Note: seq->last_line should be a descendingly sorted list. */
+ for (each_line = seq->last_line;
+ each_line;
+ each_line = each_line->prev_line)
+ if (addr >= each_line->address)
+ break;
+
+ if (each_line
+ && !(each_line->end_sequence || each_line == seq->last_line))
+ {
+ *filename_ptr = each_line->filename;
+ *linenumber_ptr = each_line->line;
+ if (discriminator_ptr)
+ *discriminator_ptr = each_line->discriminator;
+ return seq->last_line->address - seq->low_pc;
+ }
}
- return FALSE;
+ *filename_ptr = NULL;
+ return 0;
}
-/* Read in the .debug_ranges section for future reference */
+/* Read in the .debug_ranges section for future reference. */
static bfd_boolean
read_debug_ranges (struct comp_unit *unit)
{
struct dwarf2_debug *stash = unit->stash;
- if (! stash->dwarf_ranges_buffer)
- {
- bfd *abfd = unit->abfd;
- asection *msec;
-
- msec = bfd_get_section_by_name (abfd, ".debug_ranges");
- if (! msec)
- {
- (*_bfd_error_handler) (_("Dwarf Error: Can't find .debug_ranges section."));
- bfd_set_error (bfd_error_bad_value);
- return FALSE;
- }
-
- stash->dwarf_ranges_size = msec->size;
- stash->dwarf_ranges_buffer
- = bfd_simple_get_relocated_section_contents (abfd, msec, NULL,
- stash->syms);
- if (! stash->dwarf_ranges_buffer)
- return FALSE;
- }
- return TRUE;
+ return read_section (unit->abfd, &stash->debug_sections[debug_ranges],
+ stash->syms, 0,
+ &stash->dwarf_ranges_buffer, &stash->dwarf_ranges_size);
}
/* Function table functions. */
-/* If ADDR is within TABLE, set FUNCTIONNAME_PTR, and return TRUE.
- Note that we need to find the function that has the smallest
- range that contains ADDR, to handle inlined functions without
- depending upon them being ordered in TABLE by increasing range. */
+/* If ADDR is within UNIT's function tables, set FUNCTIONNAME_PTR, and return
+ TRUE. Note that we need to find the function that has the smallest range
+ that contains ADDR, to handle inlined functions without depending upon
+ them being ordered in TABLE by increasing range. */
static bfd_boolean
lookup_address_in_function_table (struct comp_unit *unit,
{
struct funcinfo* each_func;
struct funcinfo* best_fit = NULL;
+ bfd_vma best_fit_len = 0;
struct arange *arange;
for (each_func = unit->function_table;
{
if (addr >= arange->low && addr < arange->high)
{
- if (!best_fit ||
- ((arange->high - arange->low) < (best_fit->arange.high - best_fit->arange.low)))
- best_fit = each_func;
+ if (!best_fit
+ || arange->high - arange->low < best_fit_len)
+ {
+ best_fit = each_func;
+ best_fit_len = arange->high - arange->low;
+ }
}
}
}
if (best_fit)
{
- struct funcinfo* curr_func = best_fit;
-
*functionname_ptr = best_fit->name;
*function_ptr = best_fit;
-
- /* If we found a match and it is a function that was inlined,
- traverse the function list looking for the function at the
- next higher scope and save a pointer to it for future use.
- Note that because of the way the DWARF info is generated, and
- the way we build the function list, the first function at the
- next higher level is the one we want. */
-
- for (each_func = best_fit -> prev_func;
- each_func && (curr_func->tag == DW_TAG_inlined_subroutine);
- each_func = each_func->prev_func)
- {
- if (each_func->nesting_level < curr_func->nesting_level)
- {
- curr_func->caller_func = each_func;
- curr_func = each_func;
- }
- }
return TRUE;
}
else
{
struct funcinfo* each_func;
struct funcinfo* best_fit = NULL;
+ bfd_vma best_fit_len = 0;
struct arange *arange;
const char *name = bfd_asymbol_name (sym);
asection *sec = bfd_get_section (sym);
if ((!each_func->sec || each_func->sec == sec)
&& addr >= arange->low
&& addr < arange->high
+ && each_func->name
&& strcmp (name, each_func->name) == 0
&& (!best_fit
- || ((arange->high - arange->low)
- < (best_fit->arange.high - best_fit->arange.low))))
- best_fit = each_func;
+ || arange->high - arange->low < best_fit_len))
+ {
+ best_fit = each_func;
+ best_fit_len = arange->high - arange->low;
+ }
}
}
}
static char *
-find_abstract_instance_name (struct comp_unit *unit, bfd_uint64_t die_ref)
+find_abstract_instance_name (struct comp_unit *unit,
+ struct attribute *attr_ptr)
{
bfd *abfd = unit->abfd;
bfd_byte *info_ptr;
unsigned int abbrev_number, bytes_read, i;
struct abbrev_info *abbrev;
+ bfd_uint64_t die_ref = attr_ptr->u.val;
struct attribute attr;
- char *name = 0;
+ char *name = NULL;
+
+ /* DW_FORM_ref_addr can reference an entry in a different CU. It
+ is an offset from the .debug_info section, not the current CU. */
+ if (attr_ptr->form == DW_FORM_ref_addr)
+ {
+ /* We only support DW_FORM_ref_addr within the same file, so
+ any relocations should be resolved already. */
+ if (!die_ref)
+ abort ();
+
+ info_ptr = unit->sec_info_ptr + die_ref;
+
+ /* Now find the CU containing this pointer. */
+ if (info_ptr >= unit->info_ptr_unit && info_ptr < unit->end_ptr)
+ ;
+ else
+ {
+ /* Check other CUs to see if they contain the abbrev. */
+ struct comp_unit * u;
+
+ for (u = unit->prev_unit; u != NULL; u = u->prev_unit)
+ if (info_ptr >= u->info_ptr_unit && info_ptr < u->end_ptr)
+ break;
+
+ if (u == NULL)
+ for (u = unit->next_unit; u != NULL; u = u->next_unit)
+ if (info_ptr >= u->info_ptr_unit && info_ptr < u->end_ptr)
+ break;
+
+ if (u)
+ unit = u;
+ /* else FIXME: What do we do now ? */
+ }
+ }
+ else if (attr_ptr->form == DW_FORM_GNU_ref_alt)
+ {
+ info_ptr = read_alt_indirect_ref (unit, die_ref);
+ if (info_ptr == NULL)
+ {
+ (*_bfd_error_handler)
+ (_("Dwarf Error: Unable to read alt ref %u."), die_ref);
+ bfd_set_error (bfd_error_bad_value);
+ return name;
+ }
+ /* FIXME: Do we need to locate the correct CU, in a similar
+ fashion to the code in the DW_FORM_ref_addr case above ? */
+ }
+ else
+ info_ptr = unit->info_ptr_unit + die_ref;
- info_ptr = unit->info_ptr_unit + die_ref;
abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
info_ptr += bytes_read;
abbrev = lookup_abbrev (abbrev_number, unit->abbrevs);
if (! abbrev)
{
- (*_bfd_error_handler) (_("Dwarf Error: Could not find abbrev number %u."),
- abbrev_number);
+ (*_bfd_error_handler)
+ (_("Dwarf Error: Could not find abbrev number %u."), abbrev_number);
bfd_set_error (bfd_error_bad_value);
}
else
{
- for (i = 0; i < abbrev->num_attrs && !name; ++i)
+ for (i = 0; i < abbrev->num_attrs; ++i)
{
- info_ptr = read_attribute (&attr, &abbrev->attrs[i], unit, info_ptr);
+ info_ptr = read_attribute (&attr, &abbrev->attrs[i], unit,
+ info_ptr);
+ if (info_ptr == NULL)
+ break;
switch (attr.name)
{
case DW_AT_name:
- name = attr.u.str;
+ /* Prefer DW_AT_MIPS_linkage_name or DW_AT_linkage_name
+ over DW_AT_name. */
+ if (name == NULL && is_str_attr (attr.form))
+ name = attr.u.str;
break;
case DW_AT_specification:
- name = find_abstract_instance_name (unit, attr.u.val);
+ name = find_abstract_instance_name (unit, &attr);
+ break;
+ case DW_AT_linkage_name:
+ case DW_AT_MIPS_linkage_name:
+ /* PR 16949: Corrupt debug info can place
+ non-string forms into these attributes. */
+ if (is_str_attr (attr.form))
+ name = attr.u.str;
break;
default:
break;
}
}
}
- return (name);
+ return name;
}
-static void
-read_rangelist (struct comp_unit *unit, struct arange *arange, bfd_uint64_t offset)
+static bfd_boolean
+read_rangelist (struct comp_unit *unit, struct arange *arange,
+ bfd_uint64_t offset)
{
bfd_byte *ranges_ptr;
bfd_vma base_address = unit->base_address;
if (! unit->stash->dwarf_ranges_buffer)
{
if (! read_debug_ranges (unit))
- return;
+ return FALSE;
}
ranges_ptr = unit->stash->dwarf_ranges_buffer + offset;
-
+
for (;;)
{
bfd_vma low_pc;
bfd_vma high_pc;
- if (unit->offset_size == 4)
- {
- low_pc = read_4_bytes (unit->abfd, ranges_ptr);
- ranges_ptr += 4;
- high_pc = read_4_bytes (unit->abfd, ranges_ptr);
- ranges_ptr += 4;
- }
- else
- {
- low_pc = read_8_bytes (unit->abfd, ranges_ptr);
- ranges_ptr += 8;
- high_pc = read_8_bytes (unit->abfd, ranges_ptr);
- ranges_ptr += 8;
- }
+ low_pc = read_address (unit, ranges_ptr);
+ ranges_ptr += unit->addr_size;
+ high_pc = read_address (unit, ranges_ptr);
+ ranges_ptr += unit->addr_size;
+
if (low_pc == 0 && high_pc == 0)
break;
if (low_pc == -1UL && high_pc != -1UL)
base_address = high_pc;
else
- arange_add (unit->abfd, arange, base_address + low_pc, base_address + high_pc);
+ {
+ if (!arange_add (unit, arange,
+ base_address + low_pc, base_address + high_pc))
+ return FALSE;
+ }
}
+ return TRUE;
}
/* DWARF2 Compilation unit functions. */
bfd *abfd = unit->abfd;
bfd_byte *info_ptr = unit->first_child_die_ptr;
int nesting_level = 1;
+ struct funcinfo **nested_funcs;
+ int nested_funcs_size;
+
+ /* Maintain a stack of in-scope functions and inlined functions, which we
+ can use to set the caller_func field. */
+ nested_funcs_size = 32;
+ nested_funcs = (struct funcinfo **)
+ bfd_malloc (nested_funcs_size * sizeof (struct funcinfo *));
+ if (nested_funcs == NULL)
+ return FALSE;
+ nested_funcs[nesting_level] = 0;
while (nesting_level)
{
struct varinfo *var;
bfd_vma low_pc = 0;
bfd_vma high_pc = 0;
+ bfd_boolean high_pc_relative = FALSE;
abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
info_ptr += bytes_read;
abbrev = lookup_abbrev (abbrev_number,unit->abbrevs);
if (! abbrev)
{
- (*_bfd_error_handler) (_("Dwarf Error: Could not find abbrev number %u."),
- abbrev_number);
+ (*_bfd_error_handler)
+ (_("Dwarf Error: Could not find abbrev number %u."),
+ abbrev_number);
bfd_set_error (bfd_error_bad_value);
- return FALSE;
+ goto fail;
}
var = NULL;
|| abbrev->tag == DW_TAG_inlined_subroutine)
{
bfd_size_type amt = sizeof (struct funcinfo);
- func = bfd_zalloc (abfd, amt);
+ func = (struct funcinfo *) bfd_zalloc (abfd, amt);
+ if (func == NULL)
+ goto fail;
func->tag = abbrev->tag;
- func->nesting_level = nesting_level;
func->prev_func = unit->function_table;
unit->function_table = func;
+ BFD_ASSERT (!unit->cached);
+
+ if (func->tag == DW_TAG_inlined_subroutine)
+ for (i = nesting_level - 1; i >= 1; i--)
+ if (nested_funcs[i])
+ {
+ func->caller_func = nested_funcs[i];
+ break;
+ }
+ nested_funcs[nesting_level] = func;
}
else
{
if (abbrev->tag == DW_TAG_variable)
{
bfd_size_type amt = sizeof (struct varinfo);
- var = bfd_zalloc (abfd, amt);
+ var = (struct varinfo *) bfd_zalloc (abfd, amt);
+ if (var == NULL)
+ goto fail;
var->tag = abbrev->tag;
var->stack = 1;
var->prev_var = unit->variable_table;
unit->variable_table = var;
+ BFD_ASSERT (!unit->cached);
}
+
+ /* No inline function in scope at this nesting level. */
+ nested_funcs[nesting_level] = 0;
}
for (i = 0; i < abbrev->num_attrs; ++i)
{
info_ptr = read_attribute (&attr, &abbrev->attrs[i], unit, info_ptr);
+ if (info_ptr == NULL)
+ goto fail;
if (func)
{
switch (attr.name)
{
case DW_AT_call_file:
- func->caller_file = concat_filename (unit->line_table, attr.u.val);
+ func->caller_file = concat_filename (unit->line_table,
+ attr.u.val);
break;
case DW_AT_call_line:
break;
case DW_AT_abstract_origin:
- func->name = find_abstract_instance_name (unit, attr.u.val);
+ case DW_AT_specification:
+ func->name = find_abstract_instance_name (unit, &attr);
break;
case DW_AT_name:
- /* Prefer DW_AT_MIPS_linkage_name over DW_AT_name. */
- if (func->name == NULL)
+ /* Prefer DW_AT_MIPS_linkage_name or DW_AT_linkage_name
+ over DW_AT_name. */
+ if (func->name == NULL && is_str_attr (attr.form))
func->name = attr.u.str;
break;
+ case DW_AT_linkage_name:
case DW_AT_MIPS_linkage_name:
- func->name = attr.u.str;
+ /* PR 16949: Corrupt debug info can place
+ non-string forms into these attributes. */
+ if (is_str_attr (attr.form))
+ func->name = attr.u.str;
break;
case DW_AT_low_pc:
case DW_AT_high_pc:
high_pc = attr.u.val;
+ high_pc_relative = attr.form != DW_FORM_addr;
break;
case DW_AT_ranges:
- read_rangelist (unit, &func->arange, attr.u.val);
+ if (!read_rangelist (unit, &func->arange, attr.u.val))
+ goto fail;
break;
case DW_AT_decl_file:
case DW_FORM_block1:
case DW_FORM_block2:
case DW_FORM_block4:
+ case DW_FORM_exprloc:
if (*attr.u.blk->data == DW_OP_addr)
{
var->stack = 0;
- var->addr = bfd_get ((attr.u.blk->size - 1) * 8,
- unit->abfd,
- attr.u.blk->data + 1);
+
+ /* Verify that DW_OP_addr is the only opcode in the
+ location, in which case the block size will be 1
+ plus the address size. */
+ /* ??? For TLS variables, gcc can emit
+ DW_OP_addr <addr> DW_OP_GNU_push_tls_address
+ which we don't handle here yet. */
+ if (attr.u.blk->size == unit->addr_size + 1U)
+ var->addr = bfd_get (unit->addr_size * 8,
+ unit->abfd,
+ attr.u.blk->data + 1);
}
break;
-
+
default:
break;
}
}
}
+ if (high_pc_relative)
+ high_pc += low_pc;
+
if (func && high_pc != 0)
{
- arange_add (unit->abfd, &func->arange, low_pc, high_pc);
+ if (!arange_add (unit, &func->arange, low_pc, high_pc))
+ goto fail;
}
if (abbrev->has_children)
- nesting_level++;
+ {
+ nesting_level++;
+
+ if (nesting_level >= nested_funcs_size)
+ {
+ struct funcinfo **tmp;
+
+ nested_funcs_size *= 2;
+ tmp = (struct funcinfo **)
+ bfd_realloc (nested_funcs,
+ nested_funcs_size * sizeof (struct funcinfo *));
+ if (tmp == NULL)
+ goto fail;
+ nested_funcs = tmp;
+ }
+ nested_funcs[nesting_level] = 0;
+ }
}
+ free (nested_funcs);
return TRUE;
+
+ fail:
+ free (nested_funcs);
+ return FALSE;
}
/* Parse a DWARF2 compilation unit starting at INFO_PTR. This
to get to the line number information for the compilation unit. */
static struct comp_unit *
-parse_comp_unit (bfd *abfd,
- struct dwarf2_debug *stash,
+parse_comp_unit (struct dwarf2_debug *stash,
bfd_vma unit_length,
bfd_byte *info_ptr_unit,
unsigned int offset_size)
bfd_size_type amt;
bfd_vma low_pc = 0;
bfd_vma high_pc = 0;
+ bfd *abfd = stash->bfd_ptr;
+ bfd_boolean high_pc_relative = FALSE;
version = read_2_bytes (abfd, info_ptr);
info_ptr += 2;
addr_size = read_1_byte (abfd, info_ptr);
info_ptr += 1;
- if (version != 2)
+ if (version != 2 && version != 3 && version != 4)
{
- (*_bfd_error_handler) (_("Dwarf Error: found dwarf version '%u', this reader only handles version 2 information."), version);
+ (*_bfd_error_handler)
+ (_("Dwarf Error: found dwarf version '%u', this reader"
+ " only handles version 2, 3 and 4 information."), version);
bfd_set_error (bfd_error_bad_value);
return 0;
}
if (addr_size > sizeof (bfd_vma))
{
- (*_bfd_error_handler) (_("Dwarf Error: found address size '%u', this reader can not handle sizes greater than '%u'."),
- addr_size,
- (unsigned int) sizeof (bfd_vma));
+ (*_bfd_error_handler)
+ (_("Dwarf Error: found address size '%u', this reader"
+ " can not handle sizes greater than '%u'."),
+ addr_size,
+ (unsigned int) sizeof (bfd_vma));
bfd_set_error (bfd_error_bad_value);
return 0;
}
if (addr_size != 2 && addr_size != 4 && addr_size != 8)
{
- (*_bfd_error_handler) ("Dwarf Error: found address size '%u', this reader can only handle address sizes '2', '4' and '8'.", addr_size);
+ (*_bfd_error_handler)
+ ("Dwarf Error: found address size '%u', this reader"
+ " can only handle address sizes '2', '4' and '8'.", addr_size);
bfd_set_error (bfd_error_bad_value);
return 0;
}
/* Read the abbrevs for this compilation unit into a table. */
abbrevs = read_abbrevs (abfd, abbrev_offset, stash);
if (! abbrevs)
- return 0;
+ return 0;
abbrev_number = read_unsigned_leb128 (abfd, info_ptr, &bytes_read);
info_ptr += bytes_read;
if (! abbrev_number)
{
(*_bfd_error_handler) (_("Dwarf Error: Bad abbrev number: %u."),
- abbrev_number);
+ abbrev_number);
bfd_set_error (bfd_error_bad_value);
return 0;
}
if (! abbrev)
{
(*_bfd_error_handler) (_("Dwarf Error: Could not find abbrev number %u."),
- abbrev_number);
+ abbrev_number);
bfd_set_error (bfd_error_bad_value);
return 0;
}
amt = sizeof (struct comp_unit);
- unit = bfd_zalloc (abfd, amt);
+ unit = (struct comp_unit *) bfd_zalloc (abfd, amt);
+ if (unit == NULL)
+ return NULL;
unit->abfd = abfd;
+ unit->version = version;
unit->addr_size = addr_size;
unit->offset_size = offset_size;
unit->abbrevs = abbrevs;
unit->end_ptr = end_ptr;
unit->stash = stash;
unit->info_ptr_unit = info_ptr_unit;
+ unit->sec_info_ptr = stash->sec_info_ptr;
for (i = 0; i < abbrev->num_attrs; ++i)
{
info_ptr = read_attribute (&attr, &abbrev->attrs[i], unit, info_ptr);
+ if (info_ptr == NULL)
+ return NULL;
/* Store the data if it is of an attribute we want to keep in a
partial symbol table. */
/* If the compilation unit DIE has a DW_AT_low_pc attribute,
this is the base address to use when reading location
lists or range lists. */
- unit->base_address = low_pc;
+ if (abbrev->tag == DW_TAG_compile_unit)
+ unit->base_address = low_pc;
break;
case DW_AT_high_pc:
high_pc = attr.u.val;
+ high_pc_relative = attr.form != DW_FORM_addr;
break;
case DW_AT_ranges:
- read_rangelist (unit, &unit->arange, attr.u.val);
+ if (!read_rangelist (unit, &unit->arange, attr.u.val))
+ return NULL;
break;
case DW_AT_comp_dir:
break;
}
}
+ if (high_pc_relative)
+ high_pc += low_pc;
if (high_pc != 0)
{
- arange_add (unit->abfd, &unit->arange, low_pc, high_pc);
+ if (!arange_add (unit, &unit->arange, low_pc, high_pc))
+ return NULL;
}
unit->first_child_die_ptr = info_ptr;
return unit;
}
-/* Return TRUE if UNIT contains the address given by ADDR. */
+/* Return TRUE if UNIT may contain the address given by ADDR. When
+ there are functions written entirely with inline asm statements, the
+ range info in the compilation unit header may not be correct. We
+ need to consult the line info table to see if a compilation unit
+ really contains the given address. */
static bfd_boolean
comp_unit_contains_address (struct comp_unit *unit, bfd_vma addr)
FUNCTIONNAME_PTR, and LINENUMBER_PTR, are pointers to the objects
to be filled in.
- Return TRUE if UNIT contains ADDR, and no errors were encountered;
- FALSE otherwise. */
+ Returns the range of addresses covered by the entry that was used
+ to fill in *LINENUMBER_PTR or 0 if it was not filled in. */
-static bfd_boolean
+static bfd_vma
comp_unit_find_nearest_line (struct comp_unit *unit,
bfd_vma addr,
const char **filename_ptr,
const char **functionname_ptr,
unsigned int *linenumber_ptr,
+ unsigned int *discriminator_ptr,
struct dwarf2_debug *stash)
{
- bfd_boolean line_p;
bfd_boolean func_p;
struct funcinfo *function;
&function, functionname_ptr);
if (func_p && (function->tag == DW_TAG_inlined_subroutine))
stash->inliner_chain = function;
- line_p = lookup_address_in_line_info_table (unit->line_table, addr,
- function, filename_ptr,
- linenumber_ptr);
- return line_p || func_p;
-}
-/* If UNIT contains SYM at ADDR, set the output parameters to the
- values for the line containing SYM. The output parameters,
- FILENAME_PTR, and LINENUMBER_PTR, are pointers to the objects to be
- filled in.
+ return lookup_address_in_line_info_table (unit->line_table, addr,
+ filename_ptr,
+ linenumber_ptr,
+ discriminator_ptr);
+}
- Return TRUE if UNIT contains SYM, and no errors were encountered;
+/* Check to see if line info is already decoded in a comp_unit.
+ If not, decode it. Returns TRUE if no errors were encountered;
FALSE otherwise. */
static bfd_boolean
-comp_unit_find_line (struct comp_unit *unit,
- asymbol *sym,
- bfd_vma addr,
- const char **filename_ptr,
- unsigned int *linenumber_ptr,
- struct dwarf2_debug *stash)
+comp_unit_maybe_decode_line_info (struct comp_unit *unit,
+ struct dwarf2_debug *stash)
{
if (unit->error)
return FALSE;
}
}
+ return TRUE;
+}
+
+/* If UNIT contains SYM at ADDR, set the output parameters to the
+ values for the line containing SYM. The output parameters,
+ FILENAME_PTR, and LINENUMBER_PTR, are pointers to the objects to be
+ filled in.
+
+ Return TRUE if UNIT contains SYM, and no errors were encountered;
+ FALSE otherwise. */
+
+static bfd_boolean
+comp_unit_find_line (struct comp_unit *unit,
+ asymbol *sym,
+ bfd_vma addr,
+ const char **filename_ptr,
+ unsigned int *linenumber_ptr,
+ struct dwarf2_debug *stash)
+{
+ if (!comp_unit_maybe_decode_line_info (unit, stash))
+ return FALSE;
+
if (sym->flags & BSF_FUNCTION)
return lookup_symbol_in_function_table (unit, sym, addr,
filename_ptr,
linenumber_ptr);
- else
- return lookup_symbol_in_variable_table (unit, sym, addr,
- filename_ptr,
- linenumber_ptr);
+
+ return lookup_symbol_in_variable_table (unit, sym, addr,
+ filename_ptr,
+ linenumber_ptr);
+}
+
+static struct funcinfo *
+reverse_funcinfo_list (struct funcinfo *head)
+{
+ struct funcinfo *rhead;
+ struct funcinfo *temp;
+
+ for (rhead = NULL; head; head = temp)
+ {
+ temp = head->prev_func;
+ head->prev_func = rhead;
+ rhead = head;
+ }
+ return rhead;
+}
+
+static struct varinfo *
+reverse_varinfo_list (struct varinfo *head)
+{
+ struct varinfo *rhead;
+ struct varinfo *temp;
+
+ for (rhead = NULL; head; head = temp)
+ {
+ temp = head->prev_var;
+ head->prev_var = rhead;
+ rhead = head;
+ }
+ return rhead;
+}
+
+/* Extract all interesting funcinfos and varinfos of a compilation
+ unit into hash tables for faster lookup. Returns TRUE if no
+ errors were enountered; FALSE otherwise. */
+
+static bfd_boolean
+comp_unit_hash_info (struct dwarf2_debug *stash,
+ struct comp_unit *unit,
+ struct info_hash_table *funcinfo_hash_table,
+ struct info_hash_table *varinfo_hash_table)
+{
+ struct funcinfo* each_func;
+ struct varinfo* each_var;
+ bfd_boolean okay = TRUE;
+
+ BFD_ASSERT (stash->info_hash_status != STASH_INFO_HASH_DISABLED);
+
+ if (!comp_unit_maybe_decode_line_info (unit, stash))
+ return FALSE;
+
+ BFD_ASSERT (!unit->cached);
+
+ /* To preserve the original search order, we went to visit the function
+ infos in the reversed order of the list. However, making the list
+ bi-directional use quite a bit of extra memory. So we reverse
+ the list first, traverse the list in the now reversed order and
+ finally reverse the list again to get back the original order. */
+ unit->function_table = reverse_funcinfo_list (unit->function_table);
+ for (each_func = unit->function_table;
+ each_func && okay;
+ each_func = each_func->prev_func)
+ {
+ /* Skip nameless functions. */
+ if (each_func->name)
+ /* There is no need to copy name string into hash table as
+ name string is either in the dwarf string buffer or
+ info in the stash. */
+ okay = insert_info_hash_table (funcinfo_hash_table, each_func->name,
+ (void*) each_func, FALSE);
+ }
+ unit->function_table = reverse_funcinfo_list (unit->function_table);
+ if (!okay)
+ return FALSE;
+
+ /* We do the same for variable infos. */
+ unit->variable_table = reverse_varinfo_list (unit->variable_table);
+ for (each_var = unit->variable_table;
+ each_var && okay;
+ each_var = each_var->prev_var)
+ {
+ /* Skip stack vars and vars with no files or names. */
+ if (each_var->stack == 0
+ && each_var->file != NULL
+ && each_var->name != NULL)
+ /* There is no need to copy name string into hash table as
+ name string is either in the dwarf string buffer or
+ info in the stash. */
+ okay = insert_info_hash_table (varinfo_hash_table, each_var->name,
+ (void*) each_var, FALSE);
+ }
+
+ unit->variable_table = reverse_varinfo_list (unit->variable_table);
+ unit->cached = TRUE;
+ return okay;
}
/* Locate a section in a BFD containing debugging info. The search starts
from the section after AFTER_SEC, or from the first section in the BFD if
AFTER_SEC is NULL. The search works by examining the names of the
- sections. There are two permissiable names. The first is .debug_info.
- This is the standard DWARF2 name. The second is a prefix .gnu.linkonce.wi.
+ sections. There are three permissiable names. The first two are given
+ by DEBUG_SECTIONS[debug_info] (whose standard DWARF2 names are .debug_info
+ and .zdebug_info). The third is a prefix .gnu.linkonce.wi.
This is a variation on the .debug_info section which has a checksum
describing the contents appended onto the name. This allows the linker to
identify and discard duplicate debugging sections for different
compilation units. */
-#define DWARF2_DEBUG_INFO ".debug_info"
#define GNU_LINKONCE_INFO ".gnu.linkonce.wi."
static asection *
-find_debug_info (bfd *abfd, asection *after_sec)
+find_debug_info (bfd *abfd, const struct dwarf_debug_section *debug_sections,
+ asection *after_sec)
{
- asection * msec;
+ asection *msec;
+ const char *look;
- if (after_sec)
- msec = after_sec->next;
- else
- msec = abfd->sections;
+ if (after_sec == NULL)
+ {
+ look = debug_sections[debug_info].uncompressed_name;
+ msec = bfd_get_section_by_name (abfd, look);
+ if (msec != NULL)
+ return msec;
+
+ look = debug_sections[debug_info].compressed_name;
+ if (look != NULL)
+ {
+ msec = bfd_get_section_by_name (abfd, look);
+ if (msec != NULL)
+ return msec;
+ }
+
+ for (msec = abfd->sections; msec != NULL; msec = msec->next)
+ if (CONST_STRNEQ (msec->name, GNU_LINKONCE_INFO))
+ return msec;
- while (msec)
+ return NULL;
+ }
+
+ for (msec = after_sec->next; msec != NULL; msec = msec->next)
{
- if (strcmp (msec->name, DWARF2_DEBUG_INFO) == 0)
+ look = debug_sections[debug_info].uncompressed_name;
+ if (strcmp (msec->name, look) == 0)
return msec;
- if (strncmp (msec->name, GNU_LINKONCE_INFO, strlen (GNU_LINKONCE_INFO)) == 0)
+ look = debug_sections[debug_info].compressed_name;
+ if (look != NULL && strcmp (msec->name, look) == 0)
return msec;
- msec = msec->next;
+ if (CONST_STRNEQ (msec->name, GNU_LINKONCE_INFO))
+ return msec;
}
return NULL;
}
-/* The DWARF2 version of find_nearest_line. Return TRUE if the line
- is found without error. ADDR_SIZE is the number of bytes in the
- initial .debug_info length field and in the abbreviation offset.
- You may use zero to indicate that the default value should be
- used. */
+/* Transfer VMAs from object file to separate debug file. */
-bfd_boolean
-_bfd_dwarf2_find_nearest_line (bfd *abfd,
- asection *section,
- asymbol **symbols,
- bfd_vma offset,
- const char **filename_ptr,
- const char **functionname_ptr,
- unsigned int *linenumber_ptr,
- unsigned int addr_size,
- void **pinfo)
+static void
+set_debug_vma (bfd *orig_bfd, bfd *debug_bfd)
{
- /* Read each compilation unit from the section .debug_info, and check
- to see if it contains the address we are searching for. If yes,
- lookup the address, and return the line number info. If no, go
- on to the next compilation unit.
+ asection *s, *d;
- We keep a list of all the previously read compilation units, and
- a pointer to the next un-read compilation unit. Check the
- previously read units before reading more. */
- struct dwarf2_debug *stash;
+ for (s = orig_bfd->sections, d = debug_bfd->sections;
+ s != NULL && d != NULL;
+ s = s->next, d = d->next)
+ {
+ if ((d->flags & SEC_DEBUGGING) != 0)
+ break;
+ /* ??? Assumes 1-1 correspondence between sections in the
+ two files. */
+ if (strcmp (s->name, d->name) == 0)
+ {
+ d->output_section = s->output_section;
+ d->output_offset = s->output_offset;
+ d->vma = s->vma;
+ }
+ }
+}
- /* What address are we looking for? */
- bfd_vma addr;
+/* Unset vmas for adjusted sections in STASH. */
- struct comp_unit* each;
+static void
+unset_sections (struct dwarf2_debug *stash)
+{
+ int i;
+ struct adjusted_section *p;
- stash = *pinfo;
- addr = offset;
- if (section->output_section)
- addr += section->output_section->vma + section->output_offset;
- else
- addr += section->vma;
- *filename_ptr = NULL;
- *functionname_ptr = NULL;
- *linenumber_ptr = 0;
+ i = stash->adjusted_section_count;
+ p = stash->adjusted_sections;
+ for (; i > 0; i--, p++)
+ p->section->vma = 0;
+}
- /* The DWARF2 spec says that the initial length field, and the
- offset of the abbreviation table, should both be 4-byte values.
- However, some compilers do things differently. */
- if (addr_size == 0)
- addr_size = 4;
- BFD_ASSERT (addr_size == 4 || addr_size == 8);
+/* Set VMAs for allocated and .debug_info sections in ORIG_BFD, a
+ relocatable object file. VMAs are normally all zero in relocatable
+ object files, so if we want to distinguish locations in sections by
+ address we need to set VMAs so the sections do not overlap. We
+ also set VMA on .debug_info so that when we have multiple
+ .debug_info sections (or the linkonce variant) they also do not
+ overlap. The multiple .debug_info sections make up a single
+ logical section. ??? We should probably do the same for other
+ debug sections. */
+
+static bfd_boolean
+place_sections (bfd *orig_bfd, struct dwarf2_debug *stash)
+{
+ bfd *abfd;
+ struct adjusted_section *p;
+ int i;
+ const char *debug_info_name;
- if (! stash)
+ if (stash->adjusted_section_count != 0)
{
- bfd_size_type total_size;
- asection *msec;
- bfd_size_type amt = sizeof (struct dwarf2_debug);
+ i = stash->adjusted_section_count;
+ p = stash->adjusted_sections;
+ for (; i > 0; i--, p++)
+ p->section->vma = p->adj_vma;
+ return TRUE;
+ }
- stash = bfd_zalloc (abfd, amt);
- if (! stash)
- return FALSE;
+ debug_info_name = stash->debug_sections[debug_info].uncompressed_name;
+ i = 0;
+ abfd = orig_bfd;
+ while (1)
+ {
+ asection *sect;
- *pinfo = stash;
+ for (sect = abfd->sections; sect != NULL; sect = sect->next)
+ {
+ int is_debug_info;
- msec = find_debug_info (abfd, NULL);
- if (! msec)
- /* No dwarf2 info. Note that at this point the stash
- has been allocated, but contains zeros, this lets
- future calls to this function fail quicker. */
- return FALSE;
-
- /* There can be more than one DWARF2 info section in a BFD these days.
- Read them all in and produce one large stash. We do this in two
- passes - in the first pass we just accumulate the section sizes.
- In the second pass we read in the section's contents. The allows
- us to avoid reallocing the data as we add sections to the stash. */
- for (total_size = 0; msec; msec = find_debug_info (abfd, msec))
- total_size += msec->size;
+ if ((sect->output_section != NULL
+ && sect->output_section != sect
+ && (sect->flags & SEC_DEBUGGING) == 0)
+ || sect->vma != 0)
+ continue;
+
+ is_debug_info = (strcmp (sect->name, debug_info_name) == 0
+ || CONST_STRNEQ (sect->name, GNU_LINKONCE_INFO));
+
+ if (!((sect->flags & SEC_ALLOC) != 0 && abfd == orig_bfd)
+ && !is_debug_info)
+ continue;
- stash->info_ptr = bfd_alloc (abfd, total_size);
- if (stash->info_ptr == NULL)
+ i++;
+ }
+ if (abfd == stash->bfd_ptr)
+ break;
+ abfd = stash->bfd_ptr;
+ }
+
+ if (i <= 1)
+ stash->adjusted_section_count = -1;
+ else
+ {
+ bfd_vma last_vma = 0, last_dwarf = 0;
+ bfd_size_type amt = i * sizeof (struct adjusted_section);
+
+ p = (struct adjusted_section *) bfd_malloc (amt);
+ if (p == NULL)
return FALSE;
- stash->info_ptr_end = stash->info_ptr;
+ stash->adjusted_sections = p;
+ stash->adjusted_section_count = i;
- for (msec = find_debug_info (abfd, NULL);
- msec;
- msec = find_debug_info (abfd, msec))
+ abfd = orig_bfd;
+ while (1)
{
- bfd_size_type size;
- bfd_size_type start;
+ asection *sect;
- size = msec->size;
- if (size == 0)
- continue;
+ for (sect = abfd->sections; sect != NULL; sect = sect->next)
+ {
+ bfd_size_type sz;
+ int is_debug_info;
- start = stash->info_ptr_end - stash->info_ptr;
+ if ((sect->output_section != NULL
+ && sect->output_section != sect
+ && (sect->flags & SEC_DEBUGGING) == 0)
+ || sect->vma != 0)
+ continue;
- if ((bfd_simple_get_relocated_section_contents
- (abfd, msec, stash->info_ptr + start, symbols)) == NULL)
- continue;
+ is_debug_info = (strcmp (sect->name, debug_info_name) == 0
+ || CONST_STRNEQ (sect->name, GNU_LINKONCE_INFO));
- stash->info_ptr_end = stash->info_ptr + start + size;
- }
+ if (!((sect->flags & SEC_ALLOC) != 0 && abfd == orig_bfd)
+ && !is_debug_info)
+ continue;
- BFD_ASSERT (stash->info_ptr_end == stash->info_ptr + total_size);
+ sz = sect->rawsize ? sect->rawsize : sect->size;
- stash->sec = find_debug_info (abfd, NULL);
- stash->sec_info_ptr = stash->info_ptr;
- stash->syms = symbols;
+ if (is_debug_info)
+ {
+ BFD_ASSERT (sect->alignment_power == 0);
+ sect->vma = last_dwarf;
+ last_dwarf += sz;
+ }
+ else
+ {
+ /* Align the new address to the current section
+ alignment. */
+ last_vma = ((last_vma
+ + ~((bfd_vma) -1 << sect->alignment_power))
+ & ((bfd_vma) -1 << sect->alignment_power));
+ sect->vma = last_vma;
+ last_vma += sz;
+ }
+
+ p->section = sect;
+ p->adj_vma = sect->vma;
+ p++;
+ }
+ if (abfd == stash->bfd_ptr)
+ break;
+ abfd = stash->bfd_ptr;
+ }
}
- /* A null info_ptr indicates that there is no dwarf2 info
- (or that an error occured while setting up the stash). */
- if (! stash->info_ptr)
- return FALSE;
+ if (orig_bfd != stash->bfd_ptr)
+ set_debug_vma (orig_bfd, stash->bfd_ptr);
- stash->inliner_chain = NULL;
+ return TRUE;
+}
- /* Check the previously read comp. units first. */
- for (each = stash->all_comp_units; each; each = each->next_unit)
- if (comp_unit_contains_address (each, addr))
- return comp_unit_find_nearest_line (each, addr, filename_ptr,
- functionname_ptr, linenumber_ptr,
- stash);
+/* Look up a funcinfo by name using the given info hash table. If found,
+ also update the locations pointed to by filename_ptr and linenumber_ptr.
- /* Read each remaining comp. units checking each as they are read. */
- while (stash->info_ptr < stash->info_ptr_end)
- {
- bfd_vma length;
- bfd_boolean found;
- unsigned int offset_size = addr_size;
- bfd_byte *info_ptr_unit = stash->info_ptr;
+ This function returns TRUE if a funcinfo that matches the given symbol
+ and address is found with any error; otherwise it returns FALSE. */
- length = read_4_bytes (abfd, stash->info_ptr);
- /* A 0xffffff length is the DWARF3 way of indicating we use
- 64-bit offsets, instead of 32-bit offsets. */
- if (length == 0xffffffff)
+static bfd_boolean
+info_hash_lookup_funcinfo (struct info_hash_table *hash_table,
+ asymbol *sym,
+ bfd_vma addr,
+ const char **filename_ptr,
+ unsigned int *linenumber_ptr)
+{
+ struct funcinfo* each_func;
+ struct funcinfo* best_fit = NULL;
+ bfd_vma best_fit_len = 0;
+ struct info_list_node *node;
+ struct arange *arange;
+ const char *name = bfd_asymbol_name (sym);
+ asection *sec = bfd_get_section (sym);
+
+ for (node = lookup_info_hash_table (hash_table, name);
+ node;
+ node = node->next)
+ {
+ each_func = (struct funcinfo *) node->info;
+ for (arange = &each_func->arange;
+ arange;
+ arange = arange->next)
{
- offset_size = 8;
- length = read_8_bytes (abfd, stash->info_ptr + 4);
- stash->info_ptr += 12;
+ if ((!each_func->sec || each_func->sec == sec)
+ && addr >= arange->low
+ && addr < arange->high
+ && (!best_fit
+ || arange->high - arange->low < best_fit_len))
+ {
+ best_fit = each_func;
+ best_fit_len = arange->high - arange->low;
+ }
}
- /* A zero length is the IRIX way of indicating 64-bit offsets,
- mostly because the 64-bit length will generally fit in 32
- bits, and the endianness helps. */
- else if (length == 0)
+ }
+
+ if (best_fit)
+ {
+ best_fit->sec = sec;
+ *filename_ptr = best_fit->file;
+ *linenumber_ptr = best_fit->line;
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+/* Look up a varinfo by name using the given info hash table. If found,
+ also update the locations pointed to by filename_ptr and linenumber_ptr.
+
+ This function returns TRUE if a varinfo that matches the given symbol
+ and address is found with any error; otherwise it returns FALSE. */
+
+static bfd_boolean
+info_hash_lookup_varinfo (struct info_hash_table *hash_table,
+ asymbol *sym,
+ bfd_vma addr,
+ const char **filename_ptr,
+ unsigned int *linenumber_ptr)
+{
+ const char *name = bfd_asymbol_name (sym);
+ asection *sec = bfd_get_section (sym);
+ struct varinfo* each;
+ struct info_list_node *node;
+
+ for (node = lookup_info_hash_table (hash_table, name);
+ node;
+ node = node->next)
+ {
+ each = (struct varinfo *) node->info;
+ if (each->addr == addr
+ && (!each->sec || each->sec == sec))
{
- offset_size = 8;
- length = read_4_bytes (abfd, stash->info_ptr + 4);
- stash->info_ptr += 8;
+ each->sec = sec;
+ *filename_ptr = each->file;
+ *linenumber_ptr = each->line;
+ return TRUE;
}
- /* In the absence of the hints above, we assume addr_size-sized
- offsets, for backward-compatibility with pre-DWARF3 64-bit
- platforms. */
- else if (addr_size == 8)
+ }
+
+ return FALSE;
+}
+
+/* Update the funcinfo and varinfo info hash tables if they are
+ not up to date. Returns TRUE if there is no error; otherwise
+ returns FALSE and disable the info hash tables. */
+
+static bfd_boolean
+stash_maybe_update_info_hash_tables (struct dwarf2_debug *stash)
+{
+ struct comp_unit *each;
+
+ /* Exit if hash tables are up-to-date. */
+ if (stash->all_comp_units == stash->hash_units_head)
+ return TRUE;
+
+ if (stash->hash_units_head)
+ each = stash->hash_units_head->prev_unit;
+ else
+ each = stash->last_comp_unit;
+
+ while (each)
+ {
+ if (!comp_unit_hash_info (stash, each, stash->funcinfo_hash_table,
+ stash->varinfo_hash_table))
{
- length = read_8_bytes (abfd, stash->info_ptr);
- stash->info_ptr += 8;
+ stash->info_hash_status = STASH_INFO_HASH_DISABLED;
+ return FALSE;
}
- else
- stash->info_ptr += 4;
+ each = each->prev_unit;
+ }
- if (length > 0)
- {
- each = parse_comp_unit (abfd, stash, length, info_ptr_unit,
- offset_size);
- stash->info_ptr += length;
+ stash->hash_units_head = stash->all_comp_units;
+ return TRUE;
+}
- if ((bfd_vma) (stash->info_ptr - stash->sec_info_ptr)
- == stash->sec->size)
+/* Check consistency of info hash tables. This is for debugging only. */
+
+static void ATTRIBUTE_UNUSED
+stash_verify_info_hash_table (struct dwarf2_debug *stash)
+{
+ struct comp_unit *each_unit;
+ struct funcinfo *each_func;
+ struct varinfo *each_var;
+ struct info_list_node *node;
+ bfd_boolean found;
+
+ for (each_unit = stash->all_comp_units;
+ each_unit;
+ each_unit = each_unit->next_unit)
+ {
+ for (each_func = each_unit->function_table;
+ each_func;
+ each_func = each_func->prev_func)
+ {
+ if (!each_func->name)
+ continue;
+ node = lookup_info_hash_table (stash->funcinfo_hash_table,
+ each_func->name);
+ BFD_ASSERT (node);
+ found = FALSE;
+ while (node && !found)
{
- stash->sec = find_debug_info (abfd, stash->sec);
- stash->sec_info_ptr = stash->info_ptr;
+ found = node->info == each_func;
+ node = node->next;
}
+ BFD_ASSERT (found);
+ }
- if (each)
+ for (each_var = each_unit->variable_table;
+ each_var;
+ each_var = each_var->prev_var)
+ {
+ if (!each_var->name || !each_var->file || each_var->stack)
+ continue;
+ node = lookup_info_hash_table (stash->varinfo_hash_table,
+ each_var->name);
+ BFD_ASSERT (node);
+ found = FALSE;
+ while (node && !found)
{
- each->next_unit = stash->all_comp_units;
- stash->all_comp_units = each;
-
- /* DW_AT_low_pc and DW_AT_high_pc are optional for
- compilation units. If we don't have them (i.e.,
- unit->high == 0), we need to consult the line info
- table to see if a compilation unit contains the given
- address. */
- if (each->arange.high > 0)
- {
- if (comp_unit_contains_address (each, addr))
- return comp_unit_find_nearest_line (each, addr,
- filename_ptr,
- functionname_ptr,
- linenumber_ptr,
- stash);
- }
- else
- {
- found = comp_unit_find_nearest_line (each, addr,
- filename_ptr,
- functionname_ptr,
- linenumber_ptr,
- stash);
- if (found)
- return TRUE;
- }
+ found = node->info == each_var;
+ node = node->next;
}
+ BFD_ASSERT (found);
}
}
+}
- return FALSE;
+/* Check to see if we want to enable the info hash tables, which consume
+ quite a bit of memory. Currently we only check the number times
+ bfd_dwarf2_find_line is called. In the future, we may also want to
+ take the number of symbols into account. */
+
+static void
+stash_maybe_enable_info_hash_tables (bfd *abfd, struct dwarf2_debug *stash)
+{
+ BFD_ASSERT (stash->info_hash_status == STASH_INFO_HASH_OFF);
+
+ if (stash->info_hash_count++ < STASH_INFO_HASH_TRIGGER)
+ return;
+
+ /* FIXME: Maybe we should check the reduce_memory_overheads
+ and optimize fields in the bfd_link_info structure ? */
+
+ /* Create hash tables. */
+ stash->funcinfo_hash_table = create_info_hash_table (abfd);
+ stash->varinfo_hash_table = create_info_hash_table (abfd);
+ if (!stash->funcinfo_hash_table || !stash->varinfo_hash_table)
+ {
+ /* Turn off info hashes if any allocation above fails. */
+ stash->info_hash_status = STASH_INFO_HASH_DISABLED;
+ return;
+ }
+ /* We need a forced update so that the info hash tables will
+ be created even though there is no compilation unit. That
+ happens if STASH_INFO_HASH_TRIGGER is 0. */
+ stash_maybe_update_info_hash_tables (stash);
+ stash->info_hash_status = STASH_INFO_HASH_ON;
}
-/* The DWARF2 version of find_line. Return TRUE if the line is found
- without error. */
+/* Find the file and line associated with a symbol and address using the
+ info hash tables of a stash. If there is a match, the function returns
+ TRUE and update the locations pointed to by filename_ptr and linenumber_ptr;
+ otherwise it returns FALSE. */
-bfd_boolean
-_bfd_dwarf2_find_line (bfd *abfd,
- asymbol **symbols,
- asymbol *symbol,
- const char **filename_ptr,
- unsigned int *linenumber_ptr,
- unsigned int addr_size,
- void **pinfo)
+static bfd_boolean
+stash_find_line_fast (struct dwarf2_debug *stash,
+ asymbol *sym,
+ bfd_vma addr,
+ const char **filename_ptr,
+ unsigned int *linenumber_ptr)
{
- /* Read each compilation unit from the section .debug_info, and check
- to see if it contains the address we are searching for. If yes,
- lookup the address, and return the line number info. If no, go
- on to the next compilation unit.
+ BFD_ASSERT (stash->info_hash_status == STASH_INFO_HASH_ON);
- We keep a list of all the previously read compilation units, and
- a pointer to the next un-read compilation unit. Check the
- previously read units before reading more. */
- struct dwarf2_debug *stash;
+ if (sym->flags & BSF_FUNCTION)
+ return info_hash_lookup_funcinfo (stash->funcinfo_hash_table, sym, addr,
+ filename_ptr, linenumber_ptr);
+ return info_hash_lookup_varinfo (stash->varinfo_hash_table, sym, addr,
+ filename_ptr, linenumber_ptr);
+}
- /* What address are we looking for? */
- bfd_vma addr;
+/* Save current section VMAs. */
- struct comp_unit* each;
+static bfd_boolean
+save_section_vma (const bfd *abfd, struct dwarf2_debug *stash)
+{
+ asection *s;
+ unsigned int i;
- asection *section;
+ if (abfd->section_count == 0)
+ return TRUE;
+ stash->sec_vma = bfd_malloc (sizeof (*stash->sec_vma) * abfd->section_count);
+ if (stash->sec_vma == NULL)
+ return FALSE;
+ for (i = 0, s = abfd->sections; i < abfd->section_count; i++, s = s->next)
+ {
+ if (s->output_section != NULL)
+ stash->sec_vma[i] = s->output_section->vma + s->output_offset;
+ else
+ stash->sec_vma[i] = s->vma;
+ }
+ return TRUE;
+}
- bfd_boolean found;
+/* Compare current section VMAs against those at the time the stash
+ was created. If find_nearest_line is used in linker warnings or
+ errors early in the link process, the debug info stash will be
+ invalid for later calls. This is because we relocate debug info
+ sections, so the stashed section contents depend on symbol values,
+ which in turn depend on section VMAs. */
- section = bfd_get_section (symbol);
+static bfd_boolean
+section_vma_same (const bfd *abfd, const struct dwarf2_debug *stash)
+{
+ asection *s;
+ unsigned int i;
- addr = symbol->value;
- if (section->output_section)
- addr += section->output_section->vma + section->output_offset;
+ for (i = 0, s = abfd->sections; i < abfd->section_count; i++, s = s->next)
+ {
+ bfd_vma vma;
+
+ if (s->output_section != NULL)
+ vma = s->output_section->vma + s->output_offset;
+ else
+ vma = s->vma;
+ if (vma != stash->sec_vma[i])
+ return FALSE;
+ }
+ return TRUE;
+}
+
+/* Read debug information from DEBUG_BFD when DEBUG_BFD is specified.
+ If DEBUG_BFD is not specified, we read debug information from ABFD
+ or its gnu_debuglink. The results will be stored in PINFO.
+ The function returns TRUE iff debug information is ready. */
+
+bfd_boolean
+_bfd_dwarf2_slurp_debug_info (bfd *abfd, bfd *debug_bfd,
+ const struct dwarf_debug_section *debug_sections,
+ asymbol **symbols,
+ void **pinfo,
+ bfd_boolean do_place)
+{
+ bfd_size_type amt = sizeof (struct dwarf2_debug);
+ bfd_size_type total_size;
+ asection *msec;
+ struct dwarf2_debug *stash = (struct dwarf2_debug *) *pinfo;
+
+ if (stash != NULL)
+ {
+ if (section_vma_same (abfd, stash))
+ return TRUE;
+ _bfd_dwarf2_cleanup_debug_info (abfd, pinfo);
+ memset (stash, 0, amt);
+ }
else
- addr += section->vma;
+ {
+ stash = (struct dwarf2_debug *) bfd_zalloc (abfd, amt);
+ if (! stash)
+ return FALSE;
+ }
+ stash->debug_sections = debug_sections;
+ stash->syms = symbols;
+ if (!save_section_vma (abfd, stash))
+ return FALSE;
- *filename_ptr = NULL;
- stash = *pinfo;
- *filename_ptr = NULL;
- *linenumber_ptr = 0;
+ *pinfo = stash;
- if (! stash)
+ if (debug_bfd == NULL)
+ debug_bfd = abfd;
+
+ msec = find_debug_info (debug_bfd, debug_sections, NULL);
+ if (msec == NULL && abfd == debug_bfd)
{
- bfd_size_type total_size;
- asection *msec;
- bfd_size_type amt = sizeof (struct dwarf2_debug);
+ char * debug_filename = bfd_follow_gnu_debuglink (abfd, DEBUGDIR);
- stash = bfd_zalloc (abfd, amt);
- if (! stash)
+ if (debug_filename == NULL)
+ /* No dwarf2 info, and no gnu_debuglink to follow.
+ Note that at this point the stash has been allocated, but
+ contains zeros. This lets future calls to this function
+ fail more quickly. */
return FALSE;
- *pinfo = stash;
+ if ((debug_bfd = bfd_openr (debug_filename, NULL)) == NULL
+ || ! bfd_check_format (debug_bfd, bfd_object)
+ || (msec = find_debug_info (debug_bfd,
+ debug_sections, NULL)) == NULL
+ || !bfd_generic_link_read_symbols (debug_bfd))
+ {
+ if (debug_bfd)
+ bfd_close (debug_bfd);
+ /* FIXME: Should we report our failure to follow the debuglink ? */
+ free (debug_filename);
+ return FALSE;
+ }
+
+ symbols = bfd_get_outsymbols (debug_bfd);
+ stash->syms = symbols;
+ stash->close_on_cleanup = TRUE;
+ }
+ stash->bfd_ptr = debug_bfd;
- msec = find_debug_info (abfd, NULL);
- if (! msec)
- /* No dwarf2 info. Note that at this point the stash
- has been allocated, but contains zeros, this lets
- future calls to this function fail quicker. */
- return FALSE;
-
- /* There can be more than one DWARF2 info section in a BFD these days.
- Read them all in and produce one large stash. We do this in two
- passes - in the first pass we just accumulate the section sizes.
- In the second pass we read in the section's contents. The allows
- us to avoid reallocing the data as we add sections to the stash. */
- for (total_size = 0; msec; msec = find_debug_info (abfd, msec))
- total_size += msec->size;
+ if (do_place
+ && !place_sections (abfd, stash))
+ return FALSE;
- stash->info_ptr = bfd_alloc (abfd, total_size);
- if (stash->info_ptr == NULL)
+ /* There can be more than one DWARF2 info section in a BFD these
+ days. First handle the easy case when there's only one. If
+ there's more than one, try case two: none of the sections is
+ compressed. In that case, read them all in and produce one
+ large stash. We do this in two passes - in the first pass we
+ just accumulate the section sizes, and in the second pass we
+ read in the section's contents. (The allows us to avoid
+ reallocing the data as we add sections to the stash.) If
+ some or all sections are compressed, then do things the slow
+ way, with a bunch of reallocs. */
+
+ if (! find_debug_info (debug_bfd, debug_sections, msec))
+ {
+ /* Case 1: only one info section. */
+ total_size = msec->size;
+ if (! read_section (debug_bfd, &stash->debug_sections[debug_info],
+ symbols, 0,
+ &stash->info_ptr_memory, &total_size))
return FALSE;
+ }
+ else
+ {
+ /* Case 2: multiple sections. */
+ for (total_size = 0;
+ msec;
+ msec = find_debug_info (debug_bfd, debug_sections, msec))
+ total_size += msec->size;
- stash->info_ptr_end = stash->info_ptr;
+ stash->info_ptr_memory = (bfd_byte *) bfd_malloc (total_size);
+ if (stash->info_ptr_memory == NULL)
+ return FALSE;
- for (msec = find_debug_info (abfd, NULL);
+ total_size = 0;
+ for (msec = find_debug_info (debug_bfd, debug_sections, NULL);
msec;
- msec = find_debug_info (abfd, msec))
+ msec = find_debug_info (debug_bfd, debug_sections, msec))
{
bfd_size_type size;
- bfd_size_type start;
size = msec->size;
if (size == 0)
continue;
- start = stash->info_ptr_end - stash->info_ptr;
-
- if ((bfd_simple_get_relocated_section_contents
- (abfd, msec, stash->info_ptr + start, symbols)) == NULL)
- continue;
+ if (!(bfd_simple_get_relocated_section_contents
+ (debug_bfd, msec, stash->info_ptr_memory + total_size,
+ symbols)))
+ return FALSE;
- stash->info_ptr_end = stash->info_ptr + start + size;
+ total_size += size;
}
+ }
- BFD_ASSERT (stash->info_ptr_end == stash->info_ptr + total_size);
+ stash->info_ptr = stash->info_ptr_memory;
+ stash->info_ptr_end = stash->info_ptr + total_size;
+ stash->sec = find_debug_info (debug_bfd, debug_sections, NULL);
+ stash->sec_info_ptr = stash->info_ptr;
+ return TRUE;
+}
- stash->sec = find_debug_info (abfd, NULL);
- stash->sec_info_ptr = stash->info_ptr;
- stash->syms = symbols;
+/* Find the source code location of SYMBOL. If SYMBOL is NULL
+ then find the nearest source code location corresponding to
+ the address SECTION + OFFSET.
+ Returns TRUE if the line is found without error and fills in
+ FILENAME_PTR and LINENUMBER_PTR. In the case where SYMBOL was
+ NULL the FUNCTIONNAME_PTR is also filled in.
+ SYMBOLS contains the symbol table for ABFD.
+ DEBUG_SECTIONS contains the name of the dwarf debug sections.
+ ADDR_SIZE is the number of bytes in the initial .debug_info length
+ field and in the abbreviation offset, or zero to indicate that the
+ default value should be used. */
+
+bfd_boolean
+_bfd_dwarf2_find_nearest_line (bfd *abfd,
+ asymbol **symbols,
+ asymbol *symbol,
+ asection *section,
+ bfd_vma offset,
+ const char **filename_ptr,
+ const char **functionname_ptr,
+ unsigned int *linenumber_ptr,
+ unsigned int *discriminator_ptr,
+ const struct dwarf_debug_section *debug_sections,
+ unsigned int addr_size,
+ void **pinfo)
+{
+ /* Read each compilation unit from the section .debug_info, and check
+ to see if it contains the address we are searching for. If yes,
+ lookup the address, and return the line number info. If no, go
+ on to the next compilation unit.
+
+ We keep a list of all the previously read compilation units, and
+ a pointer to the next un-read compilation unit. Check the
+ previously read units before reading more. */
+ struct dwarf2_debug *stash;
+ /* What address are we looking for? */
+ bfd_vma addr;
+ struct comp_unit* each;
+ bfd_boolean found = FALSE;
+ bfd_boolean do_line;
+
+ *filename_ptr = NULL;
+ if (functionname_ptr != NULL)
+ *functionname_ptr = NULL;
+ *linenumber_ptr = 0;
+ if (discriminator_ptr)
+ *discriminator_ptr = 0;
+
+ if (! _bfd_dwarf2_slurp_debug_info (abfd, NULL, debug_sections,
+ symbols, pinfo,
+ (abfd->flags & (EXEC_P | DYNAMIC)) == 0))
+ return FALSE;
+
+ stash = (struct dwarf2_debug *) *pinfo;
+
+ do_line = symbol != NULL;
+ if (do_line)
+ {
+ BFD_ASSERT (section == NULL && offset == 0 && functionname_ptr == NULL);
+ section = bfd_get_section (symbol);
+ addr = symbol->value;
+ }
+ else
+ {
+ BFD_ASSERT (section != NULL && functionname_ptr != NULL);
+ addr = offset;
}
+ if (section->output_section)
+ addr += section->output_section->vma + section->output_offset;
+ else
+ addr += section->vma;
+
/* A null info_ptr indicates that there is no dwarf2 info
(or that an error occured while setting up the stash). */
if (! stash->info_ptr)
stash->inliner_chain = NULL;
/* Check the previously read comp. units first. */
- for (each = stash->all_comp_units; each; each = each->next_unit)
- if ((symbol->flags & BSF_FUNCTION) == 0
- || comp_unit_contains_address (each, addr))
- {
- found = comp_unit_find_line (each, symbol, addr, filename_ptr,
- linenumber_ptr, stash);
- if (found)
- return found;
- }
+ if (do_line)
+ {
+ /* The info hash tables use quite a bit of memory. We may not want to
+ always use them. We use some heuristics to decide if and when to
+ turn it on. */
+ if (stash->info_hash_status == STASH_INFO_HASH_OFF)
+ stash_maybe_enable_info_hash_tables (abfd, stash);
+
+ /* Keep info hash table up to date if they are available. Note that we
+ may disable the hash tables if there is any error duing update. */
+ if (stash->info_hash_status == STASH_INFO_HASH_ON)
+ stash_maybe_update_info_hash_tables (stash);
+
+ if (stash->info_hash_status == STASH_INFO_HASH_ON)
+ {
+ found = stash_find_line_fast (stash, symbol, addr, filename_ptr,
+ linenumber_ptr);
+ if (found)
+ goto done;
+ }
+ else
+ {
+ /* Check the previously read comp. units first. */
+ for (each = stash->all_comp_units; each; each = each->next_unit)
+ if ((symbol->flags & BSF_FUNCTION) == 0
+ || each->arange.high == 0
+ || comp_unit_contains_address (each, addr))
+ {
+ found = comp_unit_find_line (each, symbol, addr, filename_ptr,
+ linenumber_ptr, stash);
+ if (found)
+ goto done;
+ }
+ }
+ }
+ else
+ {
+ bfd_vma min_range = (bfd_vma) -1;
+ const char * local_filename = NULL;
+ const char * local_functionname = NULL;
+ unsigned int local_linenumber = 0;
+ unsigned int local_discriminator = 0;
+
+ for (each = stash->all_comp_units; each; each = each->next_unit)
+ {
+ bfd_vma range = (bfd_vma) -1;
+
+ found = ((each->arange.high == 0
+ || comp_unit_contains_address (each, addr))
+ && (range = comp_unit_find_nearest_line (each, addr,
+ & local_filename,
+ & local_functionname,
+ & local_linenumber,
+ & local_discriminator,
+ stash)) != 0);
+ if (found)
+ {
+ /* PRs 15935 15994: Bogus debug information may have provided us
+ with an erroneous match. We attempt to counter this by
+ selecting the match that has the smallest address range
+ associated with it. (We are assuming that corrupt debug info
+ will tend to result in extra large address ranges rather than
+ extra small ranges).
+
+ This does mean that we scan through all of the CUs associated
+ with the bfd each time this function is called. But this does
+ have the benefit of producing consistent results every time the
+ function is called. */
+ if (range <= min_range)
+ {
+ if (filename_ptr && local_filename)
+ * filename_ptr = local_filename;
+ if (functionname_ptr && local_functionname)
+ * functionname_ptr = local_functionname;
+ if (discriminator_ptr && local_discriminator)
+ * discriminator_ptr = local_discriminator;
+ if (local_linenumber)
+ * linenumber_ptr = local_linenumber;
+ min_range = range;
+ }
+ }
+ }
+
+ if (* linenumber_ptr)
+ {
+ found = TRUE;
+ goto done;
+ }
+ }
/* The DWARF2 spec says that the initial length field, and the
offset of the abbreviation table, should both be 4-byte values.
unsigned int offset_size = addr_size;
bfd_byte *info_ptr_unit = stash->info_ptr;
- length = read_4_bytes (abfd, stash->info_ptr);
- /* A 0xffffff length is the DWARF3 way of indicating we use
- 64-bit offsets, instead of 32-bit offsets. */
+ length = read_4_bytes (stash->bfd_ptr, stash->info_ptr);
+ /* A 0xffffff length is the DWARF3 way of indicating
+ we use 64-bit offsets, instead of 32-bit offsets. */
if (length == 0xffffffff)
{
offset_size = 8;
- length = read_8_bytes (abfd, stash->info_ptr + 4);
+ length = read_8_bytes (stash->bfd_ptr, stash->info_ptr + 4);
stash->info_ptr += 12;
}
/* A zero length is the IRIX way of indicating 64-bit offsets,
else if (length == 0)
{
offset_size = 8;
- length = read_4_bytes (abfd, stash->info_ptr + 4);
+ length = read_4_bytes (stash->bfd_ptr, stash->info_ptr + 4);
stash->info_ptr += 8;
}
- /* In the absence of the hints above, we assume addr_size-sized
- offsets, for backward-compatibility with pre-DWARF3 64-bit
- platforms. */
+ /* In the absence of the hints above, we assume 32-bit DWARF2
+ offsets even for targets with 64-bit addresses, because:
+ a) most of the time these targets will not have generated
+ more than 2Gb of debug info and so will not need 64-bit
+ offsets,
+ and
+ b) if they do use 64-bit offsets but they are not using
+ the size hints that are tested for above then they are
+ not conforming to the DWARF3 standard anyway. */
else if (addr_size == 8)
{
- length = read_8_bytes (abfd, stash->info_ptr);
- stash->info_ptr += 8;
+ offset_size = 4;
+ stash->info_ptr += 4;
}
else
stash->info_ptr += 4;
if (length > 0)
{
- each = parse_comp_unit (abfd, stash, length, info_ptr_unit,
+ each = parse_comp_unit (stash, length, info_ptr_unit,
offset_size);
+ if (!each)
+ /* The dwarf information is damaged, don't trust it any
+ more. */
+ break;
stash->info_ptr += length;
+ if (stash->all_comp_units)
+ stash->all_comp_units->prev_unit = each;
+ else
+ stash->last_comp_unit = each;
+
+ each->next_unit = stash->all_comp_units;
+ stash->all_comp_units = each;
+
+ /* DW_AT_low_pc and DW_AT_high_pc are optional for
+ compilation units. If we don't have them (i.e.,
+ unit->high == 0), we need to consult the line info table
+ to see if a compilation unit contains the given
+ address. */
+ if (do_line)
+ found = (((symbol->flags & BSF_FUNCTION) == 0
+ || each->arange.high == 0
+ || comp_unit_contains_address (each, addr))
+ && comp_unit_find_line (each, symbol, addr,
+ filename_ptr,
+ linenumber_ptr,
+ stash));
+ else
+ found = ((each->arange.high == 0
+ || comp_unit_contains_address (each, addr))
+ && comp_unit_find_nearest_line (each, addr,
+ filename_ptr,
+ functionname_ptr,
+ linenumber_ptr,
+ discriminator_ptr,
+ stash) != 0);
+
if ((bfd_vma) (stash->info_ptr - stash->sec_info_ptr)
== stash->sec->size)
{
- stash->sec = find_debug_info (abfd, stash->sec);
+ stash->sec = find_debug_info (stash->bfd_ptr, debug_sections,
+ stash->sec);
stash->sec_info_ptr = stash->info_ptr;
}
- if (each)
- {
- each->next_unit = stash->all_comp_units;
- stash->all_comp_units = each;
-
- /* DW_AT_low_pc and DW_AT_high_pc are optional for
- compilation units. If we don't have them (i.e.,
- unit->high == 0), we need to consult the line info
- table to see if a compilation unit contains the given
- address. */
- found = (((symbol->flags & BSF_FUNCTION) == 0
- || each->arange.high <= 0
- || comp_unit_contains_address (each, addr))
- && comp_unit_find_line (each, symbol, addr,
- filename_ptr,
- linenumber_ptr,
- stash));
- if (found)
- return TRUE;
- }
+ if (found)
+ goto done;
}
}
- return FALSE;
+ done:
+ if ((abfd->flags & (EXEC_P | DYNAMIC)) == 0)
+ unset_sections (stash);
+
+ return found;
}
bfd_boolean
{
struct dwarf2_debug *stash;
- stash = *pinfo;
+ stash = (struct dwarf2_debug *) *pinfo;
if (stash)
{
struct funcinfo *func = stash->inliner_chain;
+
if (func && func->caller_func)
{
*filename_ptr = func->caller_file;
*functionname_ptr = func->caller_func->name;
*linenumber_ptr = func->caller_line;
stash->inliner_chain = func->caller_func;
- return (TRUE);
+ return TRUE;
}
}
- return (FALSE);
+ return FALSE;
}
void
-_bfd_dwarf2_cleanup_debug_info (bfd *abfd)
+_bfd_dwarf2_cleanup_debug_info (bfd *abfd, void **pinfo)
{
+ struct dwarf2_debug *stash = (struct dwarf2_debug *) *pinfo;
struct comp_unit *each;
- struct dwarf2_debug *stash;
- if (abfd == NULL || elf_tdata (abfd) == NULL)
- return;
-
- stash = elf_tdata (abfd)->dwarf2_find_line_info;
-
- if (stash == NULL)
+ if (abfd == NULL || stash == NULL)
return;
for (each = stash->all_comp_units; each; each = each->next_unit)
{
struct abbrev_info **abbrevs = each->abbrevs;
+ struct funcinfo *function_table = each->function_table;
+ struct varinfo *variable_table = each->variable_table;
size_t i;
for (i = 0; i < ABBREV_HASH_SIZE; i++)
- {
- struct abbrev_info *abbrev = abbrevs[i];
+ {
+ struct abbrev_info *abbrev = abbrevs[i];
- while (abbrev)
- {
- free (abbrev->attrs);
- abbrev = abbrev->next;
- }
- }
+ while (abbrev)
+ {
+ free (abbrev->attrs);
+ abbrev = abbrev->next;
+ }
+ }
if (each->line_table)
- {
- free (each->line_table->dirs);
- free (each->line_table->files);
- }
+ {
+ free (each->line_table->dirs);
+ free (each->line_table->files);
+ }
+
+ while (function_table)
+ {
+ if (function_table->file)
+ {
+ free (function_table->file);
+ function_table->file = NULL;
+ }
+
+ if (function_table->caller_file)
+ {
+ free (function_table->caller_file);
+ function_table->caller_file = NULL;
+ }
+ function_table = function_table->prev_func;
+ }
+
+ while (variable_table)
+ {
+ if (variable_table->file)
+ {
+ free (variable_table->file);
+ variable_table->file = NULL;
+ }
+
+ variable_table = variable_table->prev_var;
+ }
}
- free (stash->dwarf_abbrev_buffer);
- free (stash->dwarf_line_buffer);
- free (stash->dwarf_ranges_buffer);
+ if (stash->dwarf_abbrev_buffer)
+ free (stash->dwarf_abbrev_buffer);
+ if (stash->dwarf_line_buffer)
+ free (stash->dwarf_line_buffer);
+ if (stash->dwarf_str_buffer)
+ free (stash->dwarf_str_buffer);
+ if (stash->dwarf_ranges_buffer)
+ free (stash->dwarf_ranges_buffer);
+ if (stash->info_ptr_memory)
+ free (stash->info_ptr_memory);
+ if (stash->close_on_cleanup)
+ bfd_close (stash->bfd_ptr);
+ if (stash->alt_dwarf_str_buffer)
+ free (stash->alt_dwarf_str_buffer);
+ if (stash->alt_dwarf_info_buffer)
+ free (stash->alt_dwarf_info_buffer);
+ if (stash->sec_vma)
+ free (stash->sec_vma);
+ if (stash->adjusted_sections)
+ free (stash->adjusted_sections);
+ if (stash->alt_bfd_ptr)
+ bfd_close (stash->alt_bfd_ptr);
}
projects / platform / upstream / binutils.git / blobdiff