CheckEnumerationProperty< DepthFunction::Type >( renderer, Renderer::Property::DEPTH_FUNCTION, DepthFunction::LESS, DepthFunction::ALWAYS, DepthFunction::GREATER, "GREATER" );
CheckEnumerationProperty< DepthTestMode::Type >( renderer, Renderer::Property::DEPTH_TEST_MODE, DepthTestMode::AUTO, DepthTestMode::OFF, DepthTestMode::ON, "ON" );
CheckEnumerationProperty< StencilFunction::Type >( renderer, Renderer::Property::STENCIL_FUNCTION, StencilFunction::ALWAYS, StencilFunction::LESS, StencilFunction::EQUAL, "EQUAL" );
- CheckEnumerationProperty< StencilMode::Type >( renderer, Renderer::Property::STENCIL_MODE, StencilMode::AUTO, StencilMode::OFF, StencilMode::ON, "ON" );
+ CheckEnumerationProperty< RenderMode::Type >( renderer, Renderer::Property::RENDER_MODE, RenderMode::AUTO, RenderMode::NONE, RenderMode::STENCIL, "STENCIL" );
CheckEnumerationProperty< StencilOperation::Type >( renderer, Renderer::Property::STENCIL_OPERATION_ON_FAIL, StencilOperation::KEEP, StencilOperation::REPLACE, StencilOperation::INCREMENT, "INCREMENT" );
CheckEnumerationProperty< StencilOperation::Type >( renderer, Renderer::Property::STENCIL_OPERATION_ON_Z_FAIL, StencilOperation::KEEP, StencilOperation::REPLACE, StencilOperation::INCREMENT, "INCREMENT" );
CheckEnumerationProperty< StencilOperation::Type >( renderer, Renderer::Property::STENCIL_OPERATION_ON_Z_PASS, StencilOperation::KEEP, StencilOperation::REPLACE, StencilOperation::INCREMENT, "INCREMENT" );
// Check depth-test is disabled.
DALI_TEST_CHECK( glEnableDisableStack.FindMethodAndParams( "Disable", GetDepthTestString() ) );
- // Turn the layer depth-test flag back on, and confirm that depth testing is *still* off.
- // This is because our renderer has DepthTestMode::AUTO and our layer behavior is LAYER_2D.
+ // Turn the layer depth-test flag back on, and confirm that depth testing is now on.
Stage::GetCurrent().GetRootLayer().SetDepthTestDisabled( false );
glEnableDisableStack.Reset();
application.Render();
// Check depth-test is *still* disabled.
- DALI_TEST_CHECK( glEnableDisableStack.FindMethodAndParams( "Disable", GetDepthTestString() ) );
+ DALI_TEST_CHECK( glEnableDisableStack.FindMethodAndParams( "Enable", GetDepthTestString() ) );
END_TEST;
}
END_TEST;
}
-int UtcDaliRendererSetStencilMode(void)
+int UtcDaliRendererSetRenderModeToUseStencilBuffer(void)
{
TestApplication application;
- tet_infoline("Test setting the StencilMode");
+ tet_infoline("Test setting the RenderMode to use the stencil buffer");
Renderer renderer = RendererTestFixture( application );
TestGlAbstraction& glAbstraction = application.GetGlAbstraction();
TraceCallStack& glEnableDisableStack = glAbstraction.GetEnableDisableTrace();
TraceCallStack& glStencilFunctionStack = glAbstraction.GetStencilFunctionTrace();
+ // Set the StencilFunction to something other than the default, to confirm it is set as a property,
+ // but NO GL call has been made while the RenderMode is set to not use the stencil buffer.
+ renderer.SetProperty( Renderer::Property::RENDER_MODE, RenderMode::NONE );
ResetDebugAndFlush( application, glEnableDisableStack, glStencilFunctionStack );
- // Set the StencilFunction to something other than the default, to confirm it is set as a property,
- // but NO GL call has been made while the StencilMode is set to OFF.
renderer.SetProperty( Renderer::Property::STENCIL_FUNCTION, StencilFunction::NEVER );
DALI_TEST_EQUALS<int>( static_cast<int>( renderer.GetProperty( Renderer::Property::STENCIL_FUNCTION ).Get<int>() ), static_cast<int>( StencilFunction::NEVER ), TEST_LOCATION );
- ResetDebugAndFlush( application, glEnableDisableStack, glStencilFunctionStack );
+ ResetDebugAndFlush( application, glEnableDisableStack, glStencilFunctionStack );
std::string methodString( "StencilFunc" );
DALI_TEST_CHECK( !glStencilFunctionStack.FindMethod( methodString ) );
- // Now set the StencilMode to ON and check the StencilFunction has changed.
- renderer.SetProperty( Renderer::Property::STENCIL_MODE, StencilMode::ON );
+ // Test the other RenderModes that will not enable the stencil buffer.
+ renderer.SetProperty( Renderer::Property::RENDER_MODE, RenderMode::AUTO );
+ ResetDebugAndFlush( application, glEnableDisableStack, glStencilFunctionStack );
+ DALI_TEST_CHECK( !glStencilFunctionStack.FindMethod( methodString ) );
+
+ renderer.SetProperty( Renderer::Property::RENDER_MODE, RenderMode::COLOR );
+ ResetDebugAndFlush( application, glEnableDisableStack, glStencilFunctionStack );
+ DALI_TEST_CHECK( !glStencilFunctionStack.FindMethod( methodString ) );
+
+ // Now set the RenderMode to modes that will use the stencil buffer, and check the StencilFunction has changed.
+ renderer.SetProperty( Renderer::Property::RENDER_MODE, RenderMode::STENCIL );
ResetDebugAndFlush( application, glEnableDisableStack, glStencilFunctionStack );
DALI_TEST_CHECK( glEnableDisableStack.FindMethodAndParams( "Enable", GetStencilTestString() ) );
DALI_TEST_CHECK( glStencilFunctionStack.FindMethod( methodString ) );
+ // Test the COLOR_STENCIL RenderMode as it also enables the stencil buffer.
+ // First set a mode to turn off the stencil buffer, so the enable is required.
+ renderer.SetProperty( Renderer::Property::RENDER_MODE, RenderMode::COLOR );
+ ResetDebugAndFlush( application, glEnableDisableStack, glStencilFunctionStack );
+ renderer.SetProperty( Renderer::Property::RENDER_MODE, RenderMode::COLOR_STENCIL );
+ ResetDebugAndFlush( application, glEnableDisableStack, glStencilFunctionStack );
+
+ DALI_TEST_CHECK( glEnableDisableStack.FindMethodAndParams( "Enable", GetStencilTestString() ) );
+ DALI_TEST_CHECK( glStencilFunctionStack.FindMethod( methodString ) );
+
+ END_TEST;
+}
+
+// Helper function for the SetRenderModeToUseColorBuffer test.
+void CheckRenderModeColorMask( TestApplication& application, Renderer& renderer, RenderMode::Type renderMode, bool expectedValue )
+{
+ // Set the RenderMode property to a value that should not allow color buffer writes.
+ renderer.SetProperty( Renderer::Property::RENDER_MODE, renderMode );
+ application.SendNotification();
+ application.Render();
+
+ // Check if ColorMask has been called, and that the values are correct.
+ TestGlAbstraction& glAbstraction = application.GetGlAbstraction();
+ const TestGlAbstraction::ColorMaskParams& colorMaskParams( glAbstraction.GetColorMaskParams() );
+
+ DALI_TEST_EQUALS<bool>( colorMaskParams.red, expectedValue, TEST_LOCATION );
+ DALI_TEST_EQUALS<bool>( colorMaskParams.green, expectedValue, TEST_LOCATION );
+ DALI_TEST_EQUALS<bool>( colorMaskParams.blue, expectedValue, TEST_LOCATION );
+ DALI_TEST_EQUALS<bool>( colorMaskParams.alpha, expectedValue, TEST_LOCATION );
+}
+
+int UtcDaliRendererSetRenderModeToUseColorBuffer(void)
+{
+ TestApplication application;
+ tet_infoline("Test setting the RenderMode to use the color buffer");
+
+ Renderer renderer = RendererTestFixture( application );
+
+ // Set the RenderMode property to a value that should not allow color buffer writes.
+ // Then check if ColorMask has been called, and that the values are correct.
+ CheckRenderModeColorMask( application, renderer, RenderMode::AUTO, true );
+ CheckRenderModeColorMask( application, renderer, RenderMode::NONE, false );
+ CheckRenderModeColorMask( application, renderer, RenderMode::COLOR, true );
+ CheckRenderModeColorMask( application, renderer, RenderMode::STENCIL, false );
+ CheckRenderModeColorMask( application, renderer, RenderMode::COLOR_STENCIL, true );
+
END_TEST;
}
TraceCallStack& glEnableDisableStack = glAbstraction.GetEnableDisableTrace();
TraceCallStack& glStencilFunctionStack = glAbstraction.GetStencilFunctionTrace();
- // StencilMode must be ON for StencilFunction to operate.
- renderer.SetProperty( Renderer::Property::STENCIL_MODE, StencilMode::ON );
+ // RenderMode must use the stencil for StencilFunction to operate.
+ renderer.SetProperty( Renderer::Property::RENDER_MODE, RenderMode::STENCIL );
ResetDebugAndFlush( application, glEnableDisableStack, glStencilFunctionStack );
/*
TraceCallStack& glEnableDisableStack = glAbstraction.GetEnableDisableTrace();
TraceCallStack& glStencilFunctionStack = glAbstraction.GetStencilFunctionTrace();
- // StencilMode must be ON for StencilOperation to operate.
- renderer.SetProperty( Renderer::Property::STENCIL_MODE, StencilMode::ON );
+ // RenderMode must use the stencil for StencilOperation to operate.
+ renderer.SetProperty( Renderer::Property::RENDER_MODE, RenderMode::STENCIL );
/*
* Lookup table for testing StencilOperation.
TraceCallStack& glEnableDisableStack = glAbstraction.GetEnableDisableTrace();
TraceCallStack& glStencilFunctionStack = glAbstraction.GetStencilFunctionTrace();
- // StencilMode must be ON for StencilMask to operate.
- renderer.SetProperty( Renderer::Property::STENCIL_MODE, StencilMode::ON );
+ // RenderMode must use the stencil for StencilMask to operate.
+ renderer.SetProperty( Renderer::Property::RENDER_MODE, RenderMode::STENCIL );
// Set the StencilMask property to a value.
renderer.SetProperty( Renderer::Property::STENCIL_MASK, 0x00 );
END_TEST;
}
-
-int UtcDaliRendererSetWriteToColorBuffer(void)
-{
- TestApplication application;
- tet_infoline("Test setting the WriteToColorBuffer flag");
-
- Renderer renderer = RendererTestFixture( application );
- TestGlAbstraction& glAbstraction = application.GetGlAbstraction();
-
- // Set the StencilMask property to a value.
- renderer.SetProperty( Renderer::Property::WRITE_TO_COLOR_BUFFER, false );
-
- // Check GetProperty returns the same value.
- DALI_TEST_CHECK( !renderer.GetProperty( Renderer::Property::WRITE_TO_COLOR_BUFFER ).Get<bool>() );
-
- application.SendNotification();
- application.Render();
-
- // Check if ColorMask has been called, and that the values are correct.
- const TestGlAbstraction::ColorMaskParams& colorMaskParams( glAbstraction.GetColorMaskParams() );
-
- DALI_TEST_EQUALS<bool>( colorMaskParams.red, false, TEST_LOCATION );
- DALI_TEST_EQUALS<bool>( colorMaskParams.green, false, TEST_LOCATION );
- DALI_TEST_EQUALS<bool>( colorMaskParams.blue, false, TEST_LOCATION );
- DALI_TEST_EQUALS<bool>( colorMaskParams.alpha, false, TEST_LOCATION );
-
- // Set the StencilMask property to true.
- renderer.SetProperty( Renderer::Property::WRITE_TO_COLOR_BUFFER, true );
-
- // Check GetProperty returns the same value.
- DALI_TEST_CHECK( renderer.GetProperty( Renderer::Property::WRITE_TO_COLOR_BUFFER ).Get<bool>() );
-
- application.SendNotification();
- application.Render();
-
- // Check if ColorMask has been called, and that the values are correct.
- const TestGlAbstraction::ColorMaskParams& colorMaskParamsChanged( glAbstraction.GetColorMaskParams() );
-
- DALI_TEST_EQUALS<bool>( colorMaskParamsChanged.red, true, TEST_LOCATION );
- DALI_TEST_EQUALS<bool>( colorMaskParamsChanged.green, true, TEST_LOCATION );
- DALI_TEST_EQUALS<bool>( colorMaskParamsChanged.blue, true, TEST_LOCATION );
- DALI_TEST_EQUALS<bool>( colorMaskParamsChanged.alpha, true, TEST_LOCATION );
-
- END_TEST;
-}