const BlendFactor::Type DEFAULT_BLEND_FACTOR_SRC_ALPHA( BlendFactor::ONE );
const BlendFactor::Type DEFAULT_BLEND_FACTOR_DEST_ALPHA( BlendFactor::ONE_MINUS_SRC_ALPHA );
-const BlendEquation::Type DEFAULT_BLEND_EQUATION_RGB( BlendEquation::ADD );
-const BlendEquation::Type DEFAULT_BLEND_EQUATION_ALPHA( BlendEquation::ADD );
+const BlendEquation::Type DEFAULT_BLEND_EQUATION_RGB( BlendEquation::ADD );
+const BlendEquation::Type DEFAULT_BLEND_EQUATION_ALPHA( BlendEquation::ADD );
/**
* @brief Get GL stencil test enumeration value as a string.
return stream.str();
}
+/**
+ * @brief Get GL depth test enumeration value as a string.
+ * @return The string representation of the value of GL_DEPTH_TEST
+ */
+std::string GetDepthTestString(void)
+{
+ std::stringstream stream;
+ stream << GL_DEPTH_TEST;
+ return stream.str();
+}
+
void ResetDebugAndFlush( TestApplication& application, TraceCallStack& glEnableDisableStack, TraceCallStack& glStencilFunctionStack )
{
glEnableDisableStack.Reset();
END_TEST;
}
-
-
int UtcDaliRendererAnimatedProperty01(void)
{
TestApplication application;
END_TEST;
}
-
int UtcDaliRendererRenderOrder2DLayer(void)
{
TestApplication application;
// create geometry
Geometry geometry = Geometry::New();
- geometry.SetGeometryType( Geometry::LINE_LOOP );
+ geometry.SetType( Geometry::LINE_LOOP );
// --------------------------------------------------------------------------
// index buffer
// LINE_STRIP, first 15, count 6
{
renderer.SetIndexRange( 15, 6 );
- geometry.SetGeometryType( Geometry::LINE_STRIP );
+ geometry.SetType( Geometry::LINE_STRIP );
sprintf( buffer, "%u, 6, %u, indices", GL_LINE_STRIP, GL_UNSIGNED_SHORT );
application.SendNotification();
application.Render();
// Index out of bounds
{
renderer.SetIndexRange( 15, 30 );
- geometry.SetGeometryType( Geometry::LINE_STRIP );
+ geometry.SetType( Geometry::LINE_STRIP );
sprintf( buffer, "%u, 6, %u, indices", GL_LINE_STRIP, GL_UNSIGNED_SHORT );
application.SendNotification();
application.Render();
// drawing whole buffer starting from 15 ( last valid primitive )
{
renderer.SetIndexRange( 15, 0 );
- geometry.SetGeometryType( Geometry::LINE_STRIP );
+ geometry.SetType( Geometry::LINE_STRIP );
sprintf( buffer, "%u, 6, %u, indices", GL_LINE_STRIP, GL_UNSIGNED_SHORT );
application.SendNotification();
application.Render();
END_TEST;
}
-Renderer StencilTestFixture( TestApplication& application )
+/**
+ * @brief This templatized function checks an enumeration property is setting and getting correctly.
+ * The checks performed are as follows:
+ * - Check the initial/default value.
+ * - Set a different value via enum.
+ * - Check it was set.
+ * - Set a different value via string.
+ * - Check it was set.
+ */
+template< typename T >
+void CheckEnumerationProperty( Renderer& renderer, Property::Index propertyIndex, T initialValue, T firstCheckEnumeration, T secondCheckEnumeration, std::string secondCheckString )
+{
+ DALI_TEST_CHECK( renderer.GetProperty<int>( propertyIndex ) == static_cast<int>( initialValue ) );
+ renderer.SetProperty( propertyIndex, firstCheckEnumeration );
+ DALI_TEST_CHECK( renderer.GetProperty<int>( propertyIndex ) == static_cast<int>( firstCheckEnumeration ) );
+ renderer.SetProperty( propertyIndex, secondCheckString );
+ DALI_TEST_CHECK( renderer.GetProperty<int>( propertyIndex ) == static_cast<int>( secondCheckEnumeration ) );
+}
+
+int UtcDaliRendererEnumProperties(void)
+{
+ TestApplication application;
+ tet_infoline( "Test Renderer enumeration properties can be set with both integer and string values" );
+
+ Geometry geometry = CreateQuadGeometry();
+ Shader shader = CreateShader();
+ Renderer renderer = Renderer::New( geometry, shader );
+
+ /*
+ * Here we use a templatized function to perform several checks on each enumeration property.
+ * @see CheckEnumerationProperty for details of the checks performed.
+ */
+
+ CheckEnumerationProperty< FaceCullingMode::Type >( renderer, Renderer::Property::FACE_CULLING_MODE, FaceCullingMode::NONE, FaceCullingMode::FRONT, FaceCullingMode::BACK, "BACK" );
+ CheckEnumerationProperty< BlendMode::Type >( renderer, Renderer::Property::BLEND_MODE, BlendMode::AUTO, BlendMode::OFF, BlendMode::ON, "ON" );
+ CheckEnumerationProperty< BlendEquation::Type >( renderer, Renderer::Property::BLEND_EQUATION_RGB, BlendEquation::ADD, BlendEquation::SUBTRACT, BlendEquation::REVERSE_SUBTRACT, "REVERSE_SUBTRACT" );
+ CheckEnumerationProperty< BlendEquation::Type >( renderer, Renderer::Property::BLEND_EQUATION_ALPHA, BlendEquation::ADD, BlendEquation::SUBTRACT, BlendEquation::REVERSE_SUBTRACT, "REVERSE_SUBTRACT" );
+ CheckEnumerationProperty< BlendFactor::Type >( renderer, Renderer::Property::BLEND_FACTOR_SRC_RGB, BlendFactor::SRC_ALPHA, BlendFactor::ONE, BlendFactor::SRC_COLOR, "SRC_COLOR" );
+ CheckEnumerationProperty< BlendFactor::Type >( renderer, Renderer::Property::BLEND_FACTOR_DEST_RGB, BlendFactor::ONE_MINUS_SRC_ALPHA, BlendFactor::ONE, BlendFactor::SRC_COLOR, "SRC_COLOR" );
+ CheckEnumerationProperty< BlendFactor::Type >( renderer, Renderer::Property::BLEND_FACTOR_SRC_ALPHA, BlendFactor::ONE, BlendFactor::ONE_MINUS_SRC_ALPHA, BlendFactor::SRC_COLOR, "SRC_COLOR" );
+ CheckEnumerationProperty< BlendFactor::Type >( renderer, Renderer::Property::BLEND_FACTOR_DEST_ALPHA, BlendFactor::ONE_MINUS_SRC_ALPHA, BlendFactor::ONE, BlendFactor::SRC_COLOR, "SRC_COLOR" );
+ CheckEnumerationProperty< DepthWriteMode::Type >( renderer, Renderer::Property::DEPTH_WRITE_MODE, DepthWriteMode::AUTO, DepthWriteMode::OFF, DepthWriteMode::ON, "ON" );
+ CheckEnumerationProperty< DepthFunction::Type >( renderer, Renderer::Property::DEPTH_FUNCTION, DepthFunction::LESS, DepthFunction::ALWAYS, DepthFunction::GREATER, "GREATER" );
+ CheckEnumerationProperty< DepthTestMode::Type >( renderer, Renderer::Property::DEPTH_TEST_MODE, DepthTestMode::AUTO, DepthTestMode::OFF, DepthTestMode::ON, "ON" );
+ CheckEnumerationProperty< StencilFunction::Type >( renderer, Renderer::Property::STENCIL_FUNCTION, StencilFunction::ALWAYS, StencilFunction::LESS, StencilFunction::EQUAL, "EQUAL" );
+ CheckEnumerationProperty< StencilMode::Type >( renderer, Renderer::Property::STENCIL_MODE, StencilMode::AUTO, StencilMode::OFF, StencilMode::ON, "ON" );
+ CheckEnumerationProperty< StencilOperation::Type >( renderer, Renderer::Property::STENCIL_OPERATION_ON_FAIL, StencilOperation::KEEP, StencilOperation::REPLACE, StencilOperation::INCREMENT, "INCREMENT" );
+ CheckEnumerationProperty< StencilOperation::Type >( renderer, Renderer::Property::STENCIL_OPERATION_ON_Z_FAIL, StencilOperation::KEEP, StencilOperation::REPLACE, StencilOperation::INCREMENT, "INCREMENT" );
+ CheckEnumerationProperty< StencilOperation::Type >( renderer, Renderer::Property::STENCIL_OPERATION_ON_Z_PASS, StencilOperation::KEEP, StencilOperation::REPLACE, StencilOperation::INCREMENT, "INCREMENT" );
+
+ END_TEST;
+}
+
+Renderer RendererTestFixture( TestApplication& application )
{
Geometry geometry = CreateQuadGeometry();
Shader shader = CreateShader();
return renderer;
}
+int UtcDaliRendererSetDepthTestMode(void)
+{
+ TestApplication application;
+ tet_infoline("Test setting the DepthTestMode");
+
+ Renderer renderer = RendererTestFixture( application );
+ TestGlAbstraction& glAbstraction = application.GetGlAbstraction();
+ glAbstraction.EnableEnableDisableCallTrace( true );
+ TraceCallStack& glEnableDisableStack = glAbstraction.GetEnableDisableTrace();
+
+ glEnableDisableStack.Reset();
+ application.SendNotification();
+ application.Render();
+
+ // Check depth-test is enabled by default.
+ DALI_TEST_CHECK( glEnableDisableStack.FindMethodAndParams( "Enable", GetDepthTestString() ) );
+ DALI_TEST_CHECK( !glEnableDisableStack.FindMethodAndParams( "Disable", GetDepthTestString() ) );
+
+ // Turn off depth-testing. We want to check if the depth buffer has been disabled, so we need to turn off depth-write as well for this case.
+ renderer.SetProperty( Renderer::Property::DEPTH_TEST_MODE, DepthTestMode::OFF );
+ renderer.SetProperty( Renderer::Property::DEPTH_WRITE_MODE, DepthWriteMode::OFF );
+
+ glEnableDisableStack.Reset();
+ application.SendNotification();
+ application.Render();
+
+ // Check the depth buffer was disabled.
+ DALI_TEST_CHECK( glEnableDisableStack.FindMethodAndParams( "Disable", GetDepthTestString() ) );
+
+ // Turn on automatic mode depth-testing.
+ // Layer behavior is currently set to LAYER_3D so AUTO should enable depth-testing.
+ renderer.SetProperty( Renderer::Property::DEPTH_TEST_MODE, DepthTestMode::AUTO );
+
+ glEnableDisableStack.Reset();
+ application.SendNotification();
+ application.Render();
+
+ // Check depth-test is now enabled.
+ DALI_TEST_CHECK( glEnableDisableStack.FindMethodAndParams( "Enable", GetDepthTestString() ) );
+ DALI_TEST_CHECK( !glEnableDisableStack.FindMethodAndParams( "Disable", GetDepthTestString() ) );
+
+ // Change the layer behavior to LAYER_2D.
+ // Note this will also disable depth testing for the layer by default, we test this first.
+ Stage::GetCurrent().GetRootLayer().SetBehavior( Layer::LAYER_2D );
+
+ glEnableDisableStack.Reset();
+ application.SendNotification();
+ application.Render();
+
+ // Check depth-test is disabled.
+ DALI_TEST_CHECK( glEnableDisableStack.FindMethodAndParams( "Disable", GetDepthTestString() ) );
+
+ // Turn the layer depth-test flag back on, and confirm that depth testing is *still* off.
+ // This is because our renderer has DepthTestMode::AUTO and our layer behavior is LAYER_2D.
+ Stage::GetCurrent().GetRootLayer().SetDepthTestDisabled( false );
+
+ glEnableDisableStack.Reset();
+ application.SendNotification();
+ application.Render();
+
+ // Check depth-test is *still* disabled.
+ DALI_TEST_CHECK( glEnableDisableStack.FindMethodAndParams( "Disable", GetDepthTestString() ) );
+
+ END_TEST;
+}
+
+int UtcDaliRendererSetDepthWriteMode(void)
+{
+ TestApplication application;
+ tet_infoline("Test setting the DepthWriteMode");
+
+ Renderer renderer = RendererTestFixture( application );
+ TestGlAbstraction& glAbstraction = application.GetGlAbstraction();
+
+ application.SendNotification();
+ application.Render();
+
+ // Check the default depth-write status first.
+ DALI_TEST_CHECK( glAbstraction.GetLastDepthMask() );
+
+ // Turn off depth-writing.
+ renderer.SetProperty( Renderer::Property::DEPTH_WRITE_MODE, DepthWriteMode::OFF );
+
+ application.SendNotification();
+ application.Render();
+
+ // Check depth-write is now disabled.
+ DALI_TEST_CHECK( !glAbstraction.GetLastDepthMask() );
+
+ // Test the AUTO mode for depth-writing.
+ // As our renderer is opaque, depth-testing should be enabled.
+ renderer.SetProperty( Renderer::Property::DEPTH_WRITE_MODE, DepthWriteMode::AUTO );
+
+ application.SendNotification();
+ application.Render();
+
+ // Check depth-write is now enabled.
+ DALI_TEST_CHECK( glAbstraction.GetLastDepthMask() );
+
+ // Now make the renderer be treated as translucent by enabling blending.
+ // The AUTO depth-write mode should turn depth-write off in this scenario.
+ renderer.SetProperty( Renderer::Property::BLEND_MODE, BlendMode::ON );
+
+ application.SendNotification();
+ application.Render();
+
+ // Check depth-write is now disabled.
+ DALI_TEST_CHECK( !glAbstraction.GetLastDepthMask() );
+
+ END_TEST;
+}
+
int UtcDaliRendererCheckStencilDefaults(void)
{
TestApplication application;
tet_infoline("Test the stencil defaults");
- Renderer renderer = StencilTestFixture( application );
+ Renderer renderer = RendererTestFixture( application );
TestGlAbstraction& glAbstraction = application.GetGlAbstraction();
glAbstraction.EnableEnableDisableCallTrace( true );
glAbstraction.EnableStencilFunctionCallTrace( true );
TestApplication application;
tet_infoline("Test setting the StencilMode");
- Renderer renderer = StencilTestFixture( application );
+ Renderer renderer = RendererTestFixture( application );
TestGlAbstraction& glAbstraction = application.GetGlAbstraction();
glAbstraction.EnableEnableDisableCallTrace( true );
glAbstraction.EnableStencilFunctionCallTrace( true );
TestApplication application;
tet_infoline("Test setting the StencilFunction");
- Renderer renderer = StencilTestFixture( application );
+ Renderer renderer = RendererTestFixture( application );
TestGlAbstraction& glAbstraction = application.GetGlAbstraction();
glAbstraction.EnableEnableDisableCallTrace( true );
glAbstraction.EnableStencilFunctionCallTrace( true );
TestApplication application;
tet_infoline("Test setting the StencilOperation");
- Renderer renderer = StencilTestFixture( application );
+ Renderer renderer = RendererTestFixture( application );
TestGlAbstraction& glAbstraction = application.GetGlAbstraction();
glAbstraction.EnableEnableDisableCallTrace( true );
glAbstraction.EnableStencilFunctionCallTrace( true );
TestApplication application;
tet_infoline("Test setting the StencilMask");
- Renderer renderer = StencilTestFixture( application );
+ Renderer renderer = RendererTestFixture( application );
TestGlAbstraction& glAbstraction = application.GetGlAbstraction();
glAbstraction.EnableEnableDisableCallTrace( true );
glAbstraction.EnableStencilFunctionCallTrace( true );
TestApplication application;
tet_infoline("Test setting the WriteToColorBuffer flag");
- Renderer renderer = StencilTestFixture( application );
+ Renderer renderer = RendererTestFixture( application );
TestGlAbstraction& glAbstraction = application.GetGlAbstraction();
// Set the StencilMask property to a value.