/*
- * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2019 Samsung Electronics Co., Ltd.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
static const float ROTATION_EPSILON = 0.0001f;
static const float VECTOR4_EPSILON = 0.0001f;
+static const float VECTOR3_EPSILON = 0.0001f;
// Functor to test whether a Finish signal is emitted
struct AnimationFinishCheck
END_TEST;
}
-int UtcDaliAnimationSetEndActioN(void)
+int UtcDaliAnimationSetEndActionN(void)
{
TestApplication application;
END_TEST;
}
+
+namespace // Purposefully left this in the middle as the values in this namespace are only used for the subsequent two test cases
+{
+enum TestFunction
+{
+ STOP,
+ CLEAR
+};
+
+void CheckPropertyValuesWhenCallingAnimationMethod( TestFunction functionToTest, const char * testName )
+{
+ tet_printf( "Testing %s\n", testName );
+
+ // When an Animation::Stop() or Animation::Clear() is called, the event-side property needs to be updated appropriately
+ // This test checks that that is being done
+
+ const float durationSeconds( 1.0f );
+ unsigned int halfAnimationDuration( static_cast< unsigned int >( durationSeconds * 1000.0f * 0.5f ) );
+ const Vector3 originalPosition( Vector3::ZERO );
+ const Vector3 targetPosition( 10.0f, 10.0f, 10.0f );
+ const Vector3 halfWayToTarget( targetPosition * 0.5f );
+
+ struct ExpectedValue
+ {
+ Animation::EndAction endAction;
+ Vector3 expectedGetPropertyValue;
+ };
+
+ ExpectedValue expectedValueTable[] =
+ {
+ { Animation::Bake, halfWayToTarget }, // When baking, the current value is the final value.
+ { Animation::BakeFinal, targetPosition }, // When BakeFinal, we should jump to the final value when clearing or stopping.
+ { Animation::Discard, originalPosition }, // When discarding, we should jump back to the original value when clearing or stopping.
+ };
+ const auto expectedValueTableCount = sizeof( expectedValueTable ) / sizeof( ExpectedValue );
+
+ for( auto i = 0u; i < expectedValueTableCount; ++i )
+ {
+ TestApplication application;
+
+ Actor actor = Actor::New();
+ Stage::GetCurrent().Add(actor);
+
+ // Build the animation
+ Animation animation = Animation::New( durationSeconds );
+ animation.SetEndAction( expectedValueTable[ i ].endAction );
+ animation.AnimateTo( Property( actor, Actor::Property::POSITION ), targetPosition, AlphaFunction::LINEAR );
+
+ // Start the animation
+ animation.Play();
+
+ application.SendNotification();
+ application.Render( halfAnimationDuration );
+
+ // Stop or Clear the animation early, both have the same effect
+ if( functionToTest == TestFunction::STOP )
+ {
+ animation.Stop();
+ }
+ else
+ {
+ animation.Clear();
+ }
+
+ // The event side property should be set the expected value immediately, the update side property will still only be halfway as we haven't run an update yet
+ DALI_TEST_EQUALS( actor.GetProperty( Actor::Property::POSITION ).Get< Vector3 >(), expectedValueTable[ i ].expectedGetPropertyValue, VECTOR3_EPSILON, TEST_LOCATION );
+ DALI_TEST_EQUALS( actor.GetCurrentProperty( Actor::Property::POSITION ).Get< Vector3 >(), halfWayToTarget, VECTOR3_EPSILON, TEST_LOCATION );
+
+ // After one frame, both values should match regardless of the End Action
+ application.SendNotification();
+ application.Render();
+
+ DALI_TEST_EQUALS( actor.GetProperty( Actor::Property::POSITION ).Get< Vector3 >(), expectedValueTable[ i ].expectedGetPropertyValue, VECTOR3_EPSILON, TEST_LOCATION );
+ DALI_TEST_EQUALS( actor.GetCurrentProperty( Actor::Property::POSITION ).Get< Vector3 >(), expectedValueTable[ i ].expectedGetPropertyValue, VECTOR3_EPSILON, TEST_LOCATION );
+ }
+}
+} // unnamed namespace
+
+int UtcDaliAnimationStopPropertyValue(void)
+{
+ CheckPropertyValuesWhenCallingAnimationMethod( TestFunction::STOP, "UtcDaliAnimationStopPropertyValue" );
+ END_TEST;
+}
+
+int UtcDaliAnimationClearPropertyValue(void)
+{
+ CheckPropertyValuesWhenCallingAnimationMethod( TestFunction::CLEAR, "UtcDaliAnimationStopPropertyValue" );
+ END_TEST;
+}
+
+int UtcDaliAnimationPausePropertyValue(void)
+{
+ const float durationSeconds( 1.0f );
+ unsigned int halfAnimationDuration( static_cast< unsigned int >( durationSeconds * 1000.0f * 0.5f ) );
+ const Vector3 originalPosition( Vector3::ZERO );
+ const Vector3 targetPosition( 10.0f, 10.0f, 10.0f );
+ const Vector3 halfWayToTarget( targetPosition * 0.5f );
+
+ Animation::EndAction endActions[] =
+ {
+ Animation::Bake,
+ Animation::BakeFinal,
+ Animation::Discard,
+ };
+ const auto endActionCount = sizeof( endActions ) / sizeof( endActions[0] );
+
+ // For all end actions, when pausing, we stay at the current value
+ for( auto i = 0u; i < endActionCount; ++i )
+ {
+ TestApplication application;
+
+ Actor actor = Actor::New();
+ Stage::GetCurrent().Add(actor);
+
+ // Build the animation
+ Animation animation = Animation::New( durationSeconds );
+ animation.SetEndAction( endActions[ i ] );
+ animation.AnimateTo( Property( actor, Actor::Property::POSITION ), targetPosition, AlphaFunction::LINEAR );
+
+ // Start the animation
+ animation.Play();
+
+ application.SendNotification();
+ application.Render( halfAnimationDuration );
+
+ // Puase the animation early
+ animation.Pause();
+
+ // The event side property should be set the current value immediately, the update side property will still only be halfway
+ DALI_TEST_EQUALS( actor.GetProperty( Actor::Property::POSITION ).Get< Vector3 >(), halfWayToTarget, VECTOR3_EPSILON, TEST_LOCATION );
+ DALI_TEST_EQUALS( actor.GetCurrentProperty( Actor::Property::POSITION ).Get< Vector3 >(), halfWayToTarget, VECTOR3_EPSILON, TEST_LOCATION );
+
+ // After one frame, both values should match regardless of the End Action
+ application.SendNotification();
+ application.Render();
+
+ DALI_TEST_EQUALS( actor.GetProperty( Actor::Property::POSITION ).Get< Vector3 >(), halfWayToTarget, VECTOR3_EPSILON, TEST_LOCATION );
+ DALI_TEST_EQUALS( actor.GetCurrentProperty( Actor::Property::POSITION ).Get< Vector3 >(), halfWayToTarget, VECTOR3_EPSILON, TEST_LOCATION );
+ }
+
+ END_TEST;
+}
+
+int UtcDaliAnimationPlayFromWithLoopCount(void)
+{
+ TestApplication application;
+
+ auto actor = Actor::New();
+ Stage::GetCurrent().Add( actor );
+
+ auto animation = Animation::New( 1.0f );
+ animation.AnimateTo( Property( actor, Actor::Property::POSITION_X ), 100.0f );
+ animation.SetLoopCount( 2 );
+ animation.Play();
+
+ application.SendNotification();
+ application.Render( 1001 );
+
+ // One loop completed
+
+ application.Render( 2005 );
+ application.SendNotification();
+
+ // 2 loops should have completed
+ DALI_TEST_EQUALS( animation.GetCurrentLoop(), 2u, TEST_LOCATION );
+
+ // Another render needs to occur after all the loops end
+ application.SendNotification();
+ application.Render( 1000 );
+
+ // Stop the animation and use PlayFrom, previously we got an Assert here
+ animation.Stop();
+ animation.PlayFrom( 0.5f );
+
+ application.SendNotification();
+ application.Render( 1000 );
+
+ DALI_TEST_EQUALS( animation.GetState(), Animation::PLAYING, TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliAnimationCombineToAndByWithStop(void)
+{
+ tet_infoline( "Ensure the Y Position is not modified when animating the X position using AnimateTo and AnimateBy");
+
+ TestApplication application;
+
+ auto actor = Actor::New();
+ actor.SetPosition( 100.0f, 100.0f );
+ Stage::GetCurrent().Add( actor );
+
+ auto animation = Animation::New( 1.0f );
+ const float origY = actor.GetProperty( Actor::Property::POSITION_Y ).Get< float >();
+ animation.AnimateTo( Property( actor, Actor::Property::POSITION ), Vector3( 150.0f, origY, 0.0f ), TimePeriod( 1.0f ) );
+ animation.AnimateBy( Property( actor, Actor::Property::POSITION ), Vector3( -30.0f, 0.0f, 0.0f ), TimePeriod( 1.0f, 1.0f ) );
+ animation.Play();
+
+ application.SendNotification();
+ application.Render( 500 );
+
+ application.SendNotification();
+ application.Render( 500 );
+
+ application.SendNotification();
+ application.Render( 500 );
+
+ // Stop and clear the animation using the current values
+ animation.Stop();
+ animation.Clear();
+
+ // Check the y position, it should be the same as before
+ DALI_TEST_EQUALS( actor.GetProperty( Actor::Property::POSITION_Y).Get< float >(), origY, TEST_LOCATION );
+
+ END_TEST;
+}
+
+int UtcDaliAnimationCountAndGetAnimationAt(void)
+{
+ tet_infoline( "UtcDaliAnimationCountAndGetAnimationAt");
+
+ TestApplication application;
+
+ auto actor = Actor::New();
+ actor.SetPosition( 100.0f, 100.0f );
+ Stage::GetCurrent().Add( actor );
+
+ auto animation = Animation::New( 1.0f );
+ const float origY = actor.GetProperty( Actor::Property::POSITION_Y ).Get< float >();
+ animation.AnimateTo( Property( actor, Actor::Property::POSITION ), Vector3( 150.0f, origY, 0.0f ), TimePeriod( 1.0f ) );
+ animation.Play();
+
+ application.SendNotification();
+ application.Render( 500 );
+
+ uint32_t animationCount = Dali::DevelAnimation::GetAnimationCount();
+ DALI_TEST_EQUALS( animationCount, 1, TEST_LOCATION );
+
+ DALI_TEST_CHECK( !Dali::DevelAnimation::GetAnimationAt( 5 ) );
+
+ Dali::Animation animationReturned = Dali::DevelAnimation::GetAnimationAt( 0 );
+ DALI_TEST_EQUALS( animationReturned.GetState(), Dali::Animation::State::PLAYING, TEST_LOCATION );
+
+ DALI_TEST_EQUALS( animation.GetDuration(), animationReturned.GetDuration(), TEST_LOCATION );
+ DALI_TEST_EQUALS( animation.GetLoopCount(), animationReturned.GetLoopCount(), TEST_LOCATION );
+ DALI_TEST_EQUALS( animation.IsLooping(), animationReturned.IsLooping(), TEST_LOCATION );
+ DALI_TEST_EQUALS( animation.GetEndAction(), animationReturned.GetEndAction(), TEST_LOCATION );
+ DALI_TEST_EQUALS( animation.GetState(), animationReturned.GetState(), TEST_LOCATION );
+
+ // Stop and clear the animation using the current values
+ animation.Stop();
+ animation.Clear();
+
+ END_TEST;
+}