#!/bin/sh
+# Run this to set up the build system: configure, makefiles, etc.
+# (based on the version in enlightenment's cvs)
-# FLAC needs relatively recent versions of autotools for autogen.sh to
-# run properly. For example, if your autoconf is too old, it will not
-# check for inttypes.h and compilation will fail later. If you are
-# having problems with autogen.sh it is best to upgrade to at least the
-# following if possible:
+# Some notes:
#
-# - autoconf 2.59
-# - automake 1.8.5
-# - libtool 1.5.6
-#
-# You may need to specify -I /SOME_PATH/share/aclocal if the packages
-# FLAC relies on (autotools, libogg, libiconv) are installed in
-# non-standard places.
+# You may need to specify -I /SOME_PATH/share/aclocal in ACLOCAL_FLAGS
+# if any packages FLAC relies on (autotools, libogg, libiconv) are
+# installed in non-standard places.
#
# If you don't have XMMS installed at all, you should comment out
# AM_PATH_XMMS in configure.in.
#
-# 'hacks' is the place to put some commands you may need. There is one
-# that seems to be necessary in some situations:
+# FLAC uses iconv but not gettext. iconv requires config.rpath which
+# is supplied by gettext, which is copied in by gettextize. But we
+# can't run gettextize since we do not fulfill all it's requirements
+# (because we don't use it). So you may have to:
+#
+# cp /usr/share/gettext/config.rpath .
#
-# * FLAC uses iconv but not gettext. iconv requires config.rpath which
-# is supplied by gettext, which is copied in by gettextize. But we
-# can't run gettextize since we do not fulfill all it's requirements
-# (because we don't use it).
+# before running autogen.sh
#
-# If the default doesn't work, try:
+# If you are running on OS X and get errors related to the AM_ICONV
+# and/or AM_LANGINFO_CODESET macros, replace those 2 lines in
+# configure.in with
#
-#hacks="cp /usr/share/gettext/config.rpath ."
+# AC_DEFINE([HAVE_ICONV], [], [Whether we have libiconv available]) LIBICONV="-liconv"
+# AC_SUBST(LIBICONV)
#
-# Otherwise, this is the no-op:
-hacks=true
+# See also http://lists.xiph.org/pipermail/flac-dev/2007-September/002384.html
#
# Also watchout, if you replace ltmain.sh, there is a bug in some
# versions of libtool (or maybe autoconf) on some platforms where the
# configure-generated libtool does not have $SED defined. See also:
#
# http://lists.gnu.org/archive/html/libtool/2003-11/msg00131.html
-#
-aclocal && libtoolize && autoconf && autoheader && $hacks && automake --foreign --include-deps --add-missing --copy
+package="flac"
+
+olddir=`pwd`
+srcdir=`dirname $0`
+test -z "$srcdir" && srcdir=.
+
+cd "$srcdir"
+DIE=0
+
+ACLOCAL_FLAGS="-I m4 $ACLOCAL_FLAGS"
+
+echo "checking for autoconf... "
+(autoconf --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have autoconf installed to compile $package."
+ echo "Download the appropriate package for your distribution,"
+ echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
+ DIE=1
+}
+
+VERSIONGREP="sed -e s/.*[^0-9\.]\([0-9][0-9]*\.[0-9][0-9]*\).*/\1/"
+VERSIONMKMAJ="sed -e s/\([0-9][0-9]*\)[^0-9].*/\\1/"
+VERSIONMKMIN="sed -e s/.*[0-9][0-9]*\.//"
+
+# do we need automake?
+if test -r Makefile.am; then
+ AM_OPTIONS=`fgrep AUTOMAKE_OPTIONS Makefile.am`
+ AM_NEEDED=`echo $AM_OPTIONS | $VERSIONGREP`
+ if test x"$AM_NEEDED" = "x$AM_OPTIONS"; then
+ AM_NEEDED=""
+ fi
+ if test -z $AM_NEEDED; then
+ echo -n "checking for automake... "
+ AUTOMAKE=automake
+ ACLOCAL=aclocal
+ if ($AUTOMAKE --version < /dev/null > /dev/null 2>&1); then
+ echo "yes"
+ else
+ echo "no"
+ AUTOMAKE=
+ fi
+ else
+ echo -n "checking for automake $AM_NEEDED or later... "
+ majneeded=`echo $AM_NEEDED | $VERSIONMKMAJ`
+ minneeded=`echo $AM_NEEDED | $VERSIONMKMIN`
+ for am in automake-$AM_NEEDED automake$AM_NEEDED \
+ automake automake-1.7 automake-1.8 automake-1.9 automake-1.10; do
+ ($am --version < /dev/null > /dev/null 2>&1) || continue
+ ver=`$am --version < /dev/null | head -n 1 | $VERSIONGREP`
+ maj=`echo $ver | $VERSIONMKMAJ`
+ min=`echo $ver | $VERSIONMKMIN`
+ if test $maj -eq $majneeded -a $min -ge $minneeded; then
+ AUTOMAKE=$am
+ echo $AUTOMAKE
+ break
+ fi
+ done
+ test -z $AUTOMAKE && echo "no"
+ echo -n "checking for aclocal $AM_NEEDED or later... "
+ for ac in aclocal-$AM_NEEDED aclocal$AM_NEEDED \
+ aclocal aclocal-1.7 aclocal-1.8 aclocal-1.9 aclocal-1.10; do
+ ($ac --version < /dev/null > /dev/null 2>&1) || continue
+ ver=`$ac --version < /dev/null | head -n 1 | $VERSIONGREP`
+ maj=`echo $ver | $VERSIONMKMAJ`
+ min=`echo $ver | $VERSIONMKMIN`
+ if test $maj -eq $majneeded -a $min -ge $minneeded; then
+ ACLOCAL=$ac
+ echo $ACLOCAL
+ break
+ fi
+ done
+ test -z $ACLOCAL && echo "no"
+ fi
+ test -z $AUTOMAKE || test -z $ACLOCAL && {
+ echo
+ echo "You must have automake installed to compile $package."
+ echo "Download the appropriate package for your distribution,"
+ echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
+ exit 1
+ }
+fi
+
+echo -n "checking for libtool... "
+for LIBTOOLIZE in libtoolize glibtoolize nope; do
+ ($LIBTOOLIZE --version) < /dev/null > /dev/null 2>&1 && break
+done
+if test x$LIBTOOLIZE = xnope; then
+ echo "nope."
+ LIBTOOLIZE=libtoolize
+else
+ echo $LIBTOOLIZE
+fi
+($LIBTOOLIZE --version) < /dev/null > /dev/null 2>&1 || {
+ echo
+ echo "You must have libtool installed to compile $package."
+ echo "Download the appropriate package for your system,"
+ echo "or get the source from one of the GNU ftp sites"
+ echo "listed in http://www.gnu.org/order/ftp.html"
+ DIE=1
+}
+
+if test "$DIE" -eq 1; then
+ exit 1
+fi
+
+if test -z "$*"; then
+ echo "I am going to run ./configure with no arguments - if you wish "
+ echo "to pass any to it, please specify them on the $0 command line."
+fi
+
+if test ! -f config.rpath ; then
+ touch config.rpath
+fi
+
+echo "Generating configuration files for $package, please wait...."
+
+echo " $ACLOCAL $ACLOCAL_FLAGS"
+$ACLOCAL $ACLOCAL_FLAGS || exit 1
+echo " $LIBTOOLIZE --automake"
+$LIBTOOLIZE --automake || exit 1
+echo " autoheader"
+autoheader || exit 1
+echo " $AUTOMAKE --add-missing $AUTOMAKE_FLAGS"
+$AUTOMAKE --add-missing $AUTOMAKE_FLAGS || exit 1
+echo " autoconf"
+autoconf || exit 1
+
+cd $olddir
+$srcdir/configure "$@" && echo
projects / platform / upstream / flac.git / blobdiff