# Run this to generate all the initial makefiles, etc.
DIE=0
-package=GStreamer
-srcfile=gst/gstobject.h
-
-(autoconf --version) < /dev/null > /dev/null 2>&1 || {
- echo
- echo "You must have autoconf installed to compile $package."
- echo "Download the appropriate package for your distribution,"
- echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/autoconf/"
- DIE=1
-}
-
-(automake --version) < /dev/null > /dev/null 2>&1 || {
- echo
- echo "You must have automake installed to compile $package."
- echo "Download the appropriate package for your distribution,"
- echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/automake/"
- DIE=1
-}
-automakevermin=`(automake --version|head -n 1|sed 's/^.* //;s/\./ /g;';echo "1 4")|sort -n|head -n 1`
-automakevergood=`(automake --version|head -n 1|sed 's/^.* //;s/\./ /g;';echo "1 4f")|sort -n|head -n 1`
-if test "x$automakevermin" != "x1 4"; then
-# version is less than 1.4, the minimum suitable version
- echo
- echo "You must have automake version 1.4 or greater installed."
- echo "Download the appropriate package for your distribution,"
- echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/automake/"
- DIE=1
-else
-if test "x$automakevergood" != "x1 4f"; then
-echo -n "Checking for patched automake..."
-# version is less than 1.4f, the version with the patch applied
-# check that patch is applied
-cat > autogen.patch.tmp <<EOF
---- 1
-+++ 2
-@@ -2383,8 +2383,8 @@
- # to all possible directories, and use it. If DIST_SUBDIRS is
- # defined, just use it.
- local (\$dist_subdir_name);
-- if (&variable_defined ('DIST_SUBDIRS')
-- || &variable_conditions ('SUBDIRS'))
-+ if (&variable_conditions ('SUBDIRS')
-+ || &variable_defined ('DIST_SUBDIRS'))
- {
- \$dist_subdir_name = 'DIST_SUBDIRS';
- if (! &variable_defined ('DIST_SUBDIRS'))
-EOF
- if patch -s -f --dry-run `which automake` <autogen.patch.tmp >/dev/null 2>&1;
- then
- # Patch succeeded: appropriately patched.
- echo " found."
- else
- # Patch failed: either unpatched or incompatibly patched.
- if patch -R -s -f --dry-run `which automake` <autogen.patch.tmp >/dev/null 2>&1;
- then
- # Reversed patch succeeded: not patched.
- echo " not found."
- echo
- echo "Detected automake version 1.4 (or near) without patch."
- echo "Your version of automake needs a patch applied in order to operate correctly."
- echo
- patchedfile="`pwd`/automake"
- if test -e $patchedfile; then
- PATCHED=0
- else
- echo "making a patched version..."
- patch -R -s -f `which automake` <autogen.patch.tmp -o $patchedfile;
- chmod +x $patchedfile;
- PATCHED=1
- fi
- echo
- echo "***************************************************************************"
- if test -e $patchedfile; then
- if test "x$PATCHED" == "x1"; then
- echo "A patched version of automake is available at:"
- echo "$patchedfile"
- echo "You should put this in an appropriate place, or modify \$PATH, so that it is"
- echo "used in preference to this installed version of automake."
- fi
- fi
- echo "It is not safe to perform the build without a patched automake."
- echo "Read the README file for an explanation."
- echo "***************************************************************************"
- echo
- DIE=1
- else
- # Reversed patch failed: incompatibly patched.
- echo
- echo
- echo "Unable to check whether automake is appropriately patched."
- echo "Your version of automake may need to have a patch applied."
- echo "Read the README file for more explanation."
- echo
- fi
+package=gstreamer
+srcfile=gst/gst.c
+
+# a quick cvs co to ease the transition
+if test ! -d common; then
+ if test -f CVS/Tag; then
+ # get everything from CVS/Tag from second character on
+ TAG="-r `tail -c +2 CVS/Tag`"
fi
-rm autogen.patch.tmp
+ echo "+ getting common from cvs"; cvs co $TAG common
fi
+
+# source helper functions
+if test ! -f common/gst-autogen.sh;
+then
+ echo There is something wrong with your source tree.
+ echo You are missing common/gst-autogen.sh
+ exit 1
fi
+. common/gst-autogen.sh
+CONFIGURE_DEF_OPT='--enable-maintainer-mode --enable-plugin-builddir --enable-failing-tests --enable-poisoning'
+autogen_options $@
-(libtool --version) < /dev/null > /dev/null 2>&1 || {
- echo
- echo "You must have libtool installed to compile $package."
- echo "Get the latest version from ftp://alpha.gnu.org/gnu/libtool/"
- DIE=1
-}
+echo -n "+ check for build tools"
+if test ! -z "$NOCHECK"; then echo ": skipped version checks"; else echo; fi
+version_check "autoconf" "$AUTOCONF autoconf autoconf-2.54 autoconf-2.53 autoconf-2.52" \
+ "ftp://ftp.gnu.org/pub/gnu/autoconf/" 2 52 || DIE=1
+version_check "automake" "$AUTOMAKE automake automake-1.7 automake17 automake-1.6" \
+ "ftp://ftp.gnu.org/pub/gnu/automake/" 1 6 || DIE=1
+version_check "autopoint" "autopoint" \
+ "ftp://ftp.gnu.org/pub/gnu/gettext/" 0 11 4 || DIE=1
+version_check "libtoolize" "libtoolize libtoolize14" \
+ "ftp://ftp.gnu.org/pub/gnu/libtool/" 1 4 0 || DIE=1
+version_check "pkg-config" "" \
+ "http://www.freedesktop.org/software/pkgconfig" 0 8 0 || DIE=1
-libtool_version=`libtool --version | sed 's/^.* \([0-9\.]*\) .*$/\1/'`
-libtool_major=`echo $libtool_version | cut -d. -f1`
-libtool_minor=`echo $libtool_version | cut -d. -f2`
-libtool_micro=`echo $libtool_version | cut -d. -f3`
-if [ x$libtool_micro = x ]; then
- libtool_micro=0
-fi
-if [ $libtool_major -le 1 ]; then
- if [ $libtool_major -lt 1 ]; then
- echo
- echo "You must have libtool 1.3.5 or greater to compile $package."
- echo "Get the latest version from ftp://alpha.gnu.org/gnu/libtool/"
- DIE=1
- elif [ $libtool_minor -le 3 ]; then
- if [ $libtool_minor -lt 3 ]; then
- echo
- echo "You must have libtool 1.3.5 or greater to compile $package."
- echo "Get the latest version from ftp://alpha.gnu.org/gnu/libtool/"
- DIE=1
- elif [ $libtool_micro -lt 5 ]; then
- echo
- echo "You must have libtool 1.3.5 or greater to compile $package."
- echo "Get the latest version from ftp://alpha.gnu.org/gnu/libtool/"
- DIE=1
- fi
- fi
-fi
+die_check $DIE
-if test "$DIE" -eq 1; then
- exit 1
-fi
+autoconf_2_52d_check || DIE=1
+aclocal_check || DIE=1
+autoheader_check || DIE=1
-test -f $srcfile || {
- echo "You must run this script in the top-level $package directory"
- exit 1
-}
+die_check $DIE
+# if no arguments specified then this will be printed
if test -z "$*"; then
- echo "I am going to run ./configure with no arguments - if you wish "
- echo "to pass any to it, please specify them on the $0 command line."
+ echo "+ checking for autogen.sh options"
+ echo " This autogen script will automatically run ./configure as:"
+ echo " ./configure $CONFIGURE_DEF_OPT"
+ echo " To pass any additional options, please specify them on the $0"
+ echo " command line."
fi
+toplevel_check $srcfile
-# Generate configure.in and configure.ac
-sed <configure.base >configure.in '/^SUBSTFOR configure.ac:.*/d;s/^SUBSTFOR configure.in://g'
-sed <configure.base >configure.ac '/^SUBSTFOR configure.in:.*/d;s/^SUBSTFOR configure.ac://g'
+# autopoint
+# older autopoint (< 0.12) has a tendency to complain about mkinstalldirs
+if test -e mkinstalldirs; then rm mkinstalldirs; fi
+# first remove patch if necessary, then run autopoint, then reapply
+if test -f po/Makefile.in.in;
+then
+ patch -p0 -R < common/gettext.patch
+fi
+tool_run "$autopoint --force"
+patch -p0 < common/gettext.patch
-libtoolize --copy --force
-aclocal $ACLOCAL_FLAGS || {
- echo
- echo "aclocal failed - check that all needed development files are present on system"
- exit 1
-}
-autoheader || {
- echo
- echo "autoheader failed"
- exit 1
-}
-autoconf || {
- echo
- echo "autoconf failed"
- #exit 1
-}
-automake --add-missing || {
- echo
- echo "automake failed"
- #exit 1
-}
+# aclocal
+if test -f acinclude.m4; then rm acinclude.m4; fi
+tool_run "$aclocal" "-I common/m4 $ACLOCAL_FLAGS"
+
+tool_run "$libtoolize" "--copy --force"
+tool_run "$autoheader"
-# now remove the cache, because it can be considered dangerous in this case
-rm -f config.cache
+# touch the stamp-h.in build stamp so we don't re-run autoheader in maintainer mode -- wingo
+echo timestamp > stamp-h.in 2> /dev/null
-# The new configure options for busy application developers (Hadess)
-#./configure --enable-maintainer-mode --enable-debug --enable-debug-verbose
+tool_run "$autoconf"
+debug "automake: $automake"
+tool_run "$automake" "--add-missing --copy"
-./configure --enable-maintainer-mode --enable-plugin-builddir --enable-debug --enable-DEBUG "$@" || {
- echo
- echo "configure failed"
- exit 1
+test -n "$NOCONFIGURE" && {
+ echo "skipping configure stage for package $package, as requested."
+ echo "autogen.sh done."
+ exit 0
+}
+
+echo "+ running configure ... "
+test ! -z "$CONFIGURE_DEF_OPT" && echo " ./configure default flags: $CONFIGURE_DEF_OPT"
+test ! -z "$CONFIGURE_EXT_OPT" && echo " ./configure external flags: $CONFIGURE_EXT_OPT"
+echo
+
+echo ./configure $CONFIGURE_DEF_OPT $CONFIGURE_EXT_OPT
+./configure $CONFIGURE_DEF_OPT $CONFIGURE_EXT_OPT || {
+ echo " configure failed"
+ exit 1
}
-echo
echo "Now type 'make' to compile $package."
+