#include <linux/static_key.h>
#include <linux/objtool.h>
+#include <linux/linkage.h>
#include <asm/alternative.h>
#include <asm/cpufeatures.h>
#include <asm/msr-index.h>
#include <asm/unwind_hints.h>
+#define RETPOLINE_THUNK_SIZE 32
+
/*
* Fill the CPU return stack buffer.
*
.endm
/*
+ * (ab)use RETPOLINE_SAFE on RET to annotate away 'bare' RET instructions
+ * vs RETBleed validation.
+ */
+#define ANNOTATE_UNRET_SAFE ANNOTATE_RETPOLINE_SAFE
+
+/*
+ * Abuse ANNOTATE_RETPOLINE_SAFE on a NOP to indicate UNRET_END, should
+ * eventually turn into it's own annotation.
+ */
+.macro ANNOTATE_UNRET_END
+#ifdef CONFIG_DEBUG_ENTRY
+ ANNOTATE_RETPOLINE_SAFE
+ nop
+#endif
+.endm
+
+/*
* JMP_NOSPEC and CALL_NOSPEC macros can be used instead of a simple
* indirect jmp/call which may be susceptible to the Spectre variant 2
* attack.
#ifdef CONFIG_RETPOLINE
ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), \
__stringify(jmp __x86_indirect_thunk_\reg), X86_FEATURE_RETPOLINE, \
- __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), X86_FEATURE_RETPOLINE_AMD
+ __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; jmp *%\reg), X86_FEATURE_RETPOLINE_LFENCE
#else
jmp *%\reg
#endif
#ifdef CONFIG_RETPOLINE
ALTERNATIVE_2 __stringify(ANNOTATE_RETPOLINE_SAFE; call *%\reg), \
__stringify(call __x86_indirect_thunk_\reg), X86_FEATURE_RETPOLINE, \
- __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; call *%\reg), X86_FEATURE_RETPOLINE_AMD
+ __stringify(lfence; ANNOTATE_RETPOLINE_SAFE; call *%\reg), X86_FEATURE_RETPOLINE_LFENCE
#else
call *%\reg
#endif
* monstrosity above, manually.
*/
.macro FILL_RETURN_BUFFER reg:req nr:req ftr:req
-#ifdef CONFIG_RETPOLINE
ALTERNATIVE "jmp .Lskip_rsb_\@", "", \ftr
__FILL_RETURN_BUFFER(\reg,\nr,%_ASM_SP)
.Lskip_rsb_\@:
+.endm
+
+#ifdef CONFIG_CPU_UNRET_ENTRY
+#define CALL_ZEN_UNTRAIN_RET "call zen_untrain_ret"
+#else
+#define CALL_ZEN_UNTRAIN_RET ""
+#endif
+
+/*
+ * Mitigate RETBleed for AMD/Hygon Zen uarch. Requires KERNEL CR3 because the
+ * return thunk isn't mapped into the userspace tables (then again, AMD
+ * typically has NO_MELTDOWN).
+ *
+ * While zen_untrain_ret() doesn't clobber anything but requires stack,
+ * entry_ibpb() will clobber AX, CX, DX.
+ *
+ * As such, this must be placed after every *SWITCH_TO_KERNEL_CR3 at a point
+ * where we have a stack but before any RET instruction.
+ */
+.macro UNTRAIN_RET
+#if defined(CONFIG_CPU_UNRET_ENTRY) || defined(CONFIG_CPU_IBPB_ENTRY)
+ ANNOTATE_UNRET_END
+ ALTERNATIVE_2 "", \
+ CALL_ZEN_UNTRAIN_RET, X86_FEATURE_UNRET, \
+ "call entry_ibpb", X86_FEATURE_ENTRY_IBPB
#endif
.endm
_ASM_PTR " 999b\n\t" \
".popsection\n\t"
+extern void __x86_return_thunk(void);
+extern void zen_untrain_ret(void);
+extern void entry_ibpb(void);
+
#ifdef CONFIG_RETPOLINE
+
+typedef u8 retpoline_thunk_t[RETPOLINE_THUNK_SIZE];
+
+#define GEN(reg) \
+ extern retpoline_thunk_t __x86_indirect_thunk_ ## reg;
+#include <asm/GEN-for-each-reg.h>
+#undef GEN
+
+extern retpoline_thunk_t __x86_indirect_thunk_array[];
+
#ifdef CONFIG_X86_64
/*
"lfence;\n" \
ANNOTATE_RETPOLINE_SAFE \
"call *%[thunk_target]\n", \
- X86_FEATURE_RETPOLINE_AMD)
+ X86_FEATURE_RETPOLINE_LFENCE)
# define THUNK_TARGET(addr) [thunk_target] "r" (addr)
"lfence;\n" \
ANNOTATE_RETPOLINE_SAFE \
"call *%[thunk_target]\n", \
- X86_FEATURE_RETPOLINE_AMD)
+ X86_FEATURE_RETPOLINE_LFENCE)
# define THUNK_TARGET(addr) [thunk_target] "rm" (addr)
#endif
/* The Spectre V2 mitigation variants */
enum spectre_v2_mitigation {
SPECTRE_V2_NONE,
- SPECTRE_V2_RETPOLINE_GENERIC,
- SPECTRE_V2_RETPOLINE_AMD,
- SPECTRE_V2_IBRS_ENHANCED,
+ SPECTRE_V2_RETPOLINE,
+ SPECTRE_V2_LFENCE,
+ SPECTRE_V2_EIBRS,
+ SPECTRE_V2_EIBRS_RETPOLINE,
+ SPECTRE_V2_EIBRS_LFENCE,
+ SPECTRE_V2_IBRS,
};
/* The indirect branch speculation control variants */
/* The Intel SPEC CTRL MSR base value cache */
extern u64 x86_spec_ctrl_base;
+extern u64 x86_spec_ctrl_current;
+extern void write_spec_ctrl_current(u64 val, bool force);
+extern u64 spec_ctrl_current(void);
/*
* With retpoline, we must use IBRS to restrict branch prediction
*/
#define firmware_restrict_branch_speculation_start() \
do { \
- u64 val = x86_spec_ctrl_base | SPEC_CTRL_IBRS; \
- \
preempt_disable(); \
- alternative_msr_write(MSR_IA32_SPEC_CTRL, val, \
+ alternative_msr_write(MSR_IA32_SPEC_CTRL, \
+ spec_ctrl_current() | SPEC_CTRL_IBRS, \
X86_FEATURE_USE_IBRS_FW); \
} while (0)
#define firmware_restrict_branch_speculation_end() \
do { \
- u64 val = x86_spec_ctrl_base; \
- \
- alternative_msr_write(MSR_IA32_SPEC_CTRL, val, \
+ alternative_msr_write(MSR_IA32_SPEC_CTRL, \
+ spec_ctrl_current(), \
X86_FEATURE_USE_IBRS_FW); \
preempt_enable(); \
} while (0)
DECLARE_STATIC_KEY_FALSE(switch_mm_cond_l1d_flush);
+DECLARE_STATIC_KEY_FALSE(mmio_stale_data_clear);
+
#include <asm/segment.h>
/**
#endif /* __ASSEMBLY__ */
-/*
- * Below is used in the eBPF JIT compiler and emits the byte sequence
- * for the following assembly:
- *
- * With retpolines configured:
- *
- * callq do_rop
- * spec_trap:
- * pause
- * lfence
- * jmp spec_trap
- * do_rop:
- * mov %rcx,(%rsp) for x86_64
- * mov %edx,(%esp) for x86_32
- * retq
- *
- * Without retpolines configured:
- *
- * jmp *%rcx for x86_64
- * jmp *%edx for x86_32
- */
-#ifdef CONFIG_RETPOLINE
-# ifdef CONFIG_X86_64
-# define RETPOLINE_RCX_BPF_JIT_SIZE 17
-# define RETPOLINE_RCX_BPF_JIT() \
-do { \
- EMIT1_off32(0xE8, 7); /* callq do_rop */ \
- /* spec_trap: */ \
- EMIT2(0xF3, 0x90); /* pause */ \
- EMIT3(0x0F, 0xAE, 0xE8); /* lfence */ \
- EMIT2(0xEB, 0xF9); /* jmp spec_trap */ \
- /* do_rop: */ \
- EMIT4(0x48, 0x89, 0x0C, 0x24); /* mov %rcx,(%rsp) */ \
- EMIT1(0xC3); /* retq */ \
-} while (0)
-# else /* !CONFIG_X86_64 */
-# define RETPOLINE_EDX_BPF_JIT() \
-do { \
- EMIT1_off32(0xE8, 7); /* call do_rop */ \
- /* spec_trap: */ \
- EMIT2(0xF3, 0x90); /* pause */ \
- EMIT3(0x0F, 0xAE, 0xE8); /* lfence */ \
- EMIT2(0xEB, 0xF9); /* jmp spec_trap */ \
- /* do_rop: */ \
- EMIT3(0x89, 0x14, 0x24); /* mov %edx,(%esp) */ \
- EMIT1(0xC3); /* ret */ \
-} while (0)
-# endif
-#else /* !CONFIG_RETPOLINE */
-# ifdef CONFIG_X86_64
-# define RETPOLINE_RCX_BPF_JIT_SIZE 2
-# define RETPOLINE_RCX_BPF_JIT() \
- EMIT2(0xFF, 0xE1); /* jmp *%rcx */
-# else /* !CONFIG_X86_64 */
-# define RETPOLINE_EDX_BPF_JIT() \
- EMIT2(0xFF, 0xE2) /* jmp *%edx */
-# endif
-#endif
-
#endif /* _ASM_X86_NOSPEC_BRANCH_H_ */