Merge branch 'master' of git://git.denx.de/u-boot

[platform/kernel/u-boot.git] / arch / x86 / cpu / queensbay / tnc.c

diff --git a/arch/x86/cpu/queensbay/tnc.c b/arch/x86/cpu/queensbay/tnc.c
index 8b9815f..0c02a44 100644 (file)
--- a/arch/x86/cpu/queensbay/tnc.c
+++ b/arch/x86/cpu/queensbay/tnc.c
@@ -6,43 +6,98 @@
 
 #include <common.h>
 #include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
 #include <asm/post.h>
-#include <asm/arch/fsp/fsp_support.h>
+#include <asm/arch/device.h>
+#include <asm/arch/tnc.h>
+#include <asm/fsp/fsp_support.h>
 #include <asm/processor.h>
 
+static void unprotect_spi_flash(void)
+{
+       u32 bc;
+
+       bc = x86_pci_read_config32(TNC_LPC, 0xd8);
+       bc |= 0x1;      /* unprotect the flash */
+       x86_pci_write_config32(TNC_LPC, 0xd8, bc);
+}
+
+static void __maybe_unused disable_igd(void)
+{
+       u32 gc;
+
+       gc = x86_pci_read_config32(TNC_IGD, IGD_GC);
+       gc &= ~GMS_MASK;
+       gc |= VGA_DISABLE;
+       x86_pci_write_config32(TNC_IGD, IGD_GC, gc);
+}
+
 int arch_cpu_init(void)
 {
+       int ret;
+
        post_code(POST_CPU_INIT);
 #ifdef CONFIG_SYS_X86_TSC_TIMER
        timer_set_base(rdtsc());
 #endif
 
-       return x86_cpu_init_f();
+       ret = x86_cpu_init_f();
+       if (ret)
+               return ret;
+
+       return 0;
 }
 
-int print_cpuinfo(void)
+int arch_early_init_r(void)
 {
-       post_code(POST_CPU_INFO);
-       return default_print_cpuinfo();
+#ifdef CONFIG_DISABLE_IGD
+       disable_igd();
+#endif
+
+       return 0;
 }
 
-void reset_cpu(ulong addr)
+void cpu_irq_init(void)
 {
-       /* cold reset */
-       outb(0x06, PORT_RESET);
+       struct tnc_rcba *rcba;
+       u32 base;
+
+       base = x86_pci_read_config32(TNC_LPC, LPC_RCBA);
+       base &= ~MEM_BAR_EN;
+       rcba = (struct tnc_rcba *)base;
+
+       /* Make sure all internal PCI devices are using INTA */
+       writel(INTA, &rcba->d02ip);
+       writel(INTA, &rcba->d03ip);
+       writel(INTA, &rcba->d27ip);
+       writel(INTA, &rcba->d31ip);
+       writel(INTA, &rcba->d23ip);
+       writel(INTA, &rcba->d24ip);
+       writel(INTA, &rcba->d25ip);
+       writel(INTA, &rcba->d26ip);
+
+       /*
+        * Route TunnelCreek PCI device interrupt pin to PIRQ
+        *
+        * Since PCIe downstream ports received INTx are routed to PIRQ
+        * A/B/C/D directly and not configurable, we have to route PCIe
+        * root ports' INTx to PIRQ A/B/C/D as well. For other devices
+        * on TunneCreek, route them to PIRQ E/F/G/H.
+        */
+       writew(PIRQE, &rcba->d02ir);
+       writew(PIRQF, &rcba->d03ir);
+       writew(PIRQG, &rcba->d27ir);
+       writew(PIRQH, &rcba->d31ir);
+       writew(PIRQA, &rcba->d23ir);
+       writew(PIRQB, &rcba->d24ir);
+       writew(PIRQC, &rcba->d25ir);
+       writew(PIRQD, &rcba->d26ir);
 }
 
-void board_final_cleanup(void)
+int arch_misc_init(void)
 {
-       u32 status;
-
-       /* call into FspNotify */
-       debug("Calling into FSP (notify phase INIT_PHASE_BOOT): ");
-       status = fsp_notify(NULL, INIT_PHASE_BOOT);
-       if (status != FSP_SUCCESS)
-               debug("fail, error code %x\n", status);
-       else
-               debug("OK\n");
+       unprotect_spi_flash();
 
-       return;
+       return pirq_init();
 }