#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <asm/heartbeat.h>
#include <asm/sh_eth.h>
#include <asm/clock.h>
-#include <asm/sh_keysc.h>
+#include <asm/suspend.h>
#include <cpu/sh7724.h>
#include <mach-se/mach/se7724.h>
.resource = sh7724_usb1_gadget_resources,
};
+static struct resource sdhi0_cn7_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0x04ce0000,
+ .end = 0x04ce01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 101,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_cn7_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(sdhi0_cn7_resources),
+ .resource = sdhi0_cn7_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI0,
+ },
+};
+
+static struct resource sdhi1_cn8_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0x04cf0000,
+ .end = 0x04cf01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 24,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_cn8_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(sdhi1_cn8_resources),
+ .resource = sdhi1_cn8_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI1,
+ },
+};
+
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
&sh7724_usb0_host_device,
&sh7724_usb1_gadget_device,
&fsi_device,
+ &sdhi0_cn7_device,
+ &sdhi1_cn8_device,
};
#define EEPROM_OP 0xBA206000
static void __init sh_eth_init(void)
{
int i;
- u16 mac[3];
+ u16 mac;
/* check EEPROM status */
if (!sh_eth_is_eeprom_ready())
if (!sh_eth_is_eeprom_ready())
return;
- mac[i] = ctrl_inw(EEPROM_DATA);
- mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+ mac = ctrl_inw(EEPROM_DATA);
+ sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
+ sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
}
-
- /* reset sh-eth */
- ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
-
- /* set MAC addr */
- ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
- ctrl_outl((mac[2]), SH_ETH_MALR);
}
#define SW4140 0xBA201000
#define SW41_G 0x4000
#define SW41_H 0x8000
+extern char ms7724se_sdram_enter_start;
+extern char ms7724se_sdram_enter_end;
+extern char ms7724se_sdram_leave_start;
+extern char ms7724se_sdram_leave_end;
+
static int __init devices_setup(void)
{
u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
struct clk *fsia_clk;
+ /* register board specific self-refresh code */
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ &ms7724se_sdram_enter_start,
+ &ms7724se_sdram_enter_end,
+ &ms7724se_sdram_leave_start,
+ &ms7724se_sdram_leave_end);
/* Reset Release */
ctrl_outw(ctrl_inw(FPGA_OUT) &
~((1 << 1) | /* LAN */
clk_set_rate(&fsimcka_clk, 11000);
clk_put(fsia_clk);
+ /* SDHI0 connected to cn7 */
+ gpio_request(GPIO_FN_SDHI0CD, NULL);
+ gpio_request(GPIO_FN_SDHI0WP, NULL);
+ gpio_request(GPIO_FN_SDHI0D3, NULL);
+ gpio_request(GPIO_FN_SDHI0D2, NULL);
+ gpio_request(GPIO_FN_SDHI0D1, NULL);
+ gpio_request(GPIO_FN_SDHI0D0, NULL);
+ gpio_request(GPIO_FN_SDHI0CMD, NULL);
+ gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
+ /* SDHI1 connected to cn8 */
+ gpio_request(GPIO_FN_SDHI1CD, NULL);
+ gpio_request(GPIO_FN_SDHI1WP, NULL);
+ gpio_request(GPIO_FN_SDHI1D3, NULL);
+ gpio_request(GPIO_FN_SDHI1D2, NULL);
+ gpio_request(GPIO_FN_SDHI1D1, NULL);
+ gpio_request(GPIO_FN_SDHI1D0, NULL);
+ gpio_request(GPIO_FN_SDHI1CMD, NULL);
+ gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
/*
* enable SH-Eth
*