config TARGET_AX25_AE350
bool "Support ax25-ae350"
+config TARGET_MICROCHIP_ICICLE
+ bool "Support Microchip PolarFire-SoC Icicle Board"
+
config TARGET_QEMU_VIRT
bool "Support QEMU Virt Board"
config TARGET_SIFIVE_FU540
bool "Support SiFive FU540 Board"
+config TARGET_SIPEED_MAIX
+ bool "Support Sipeed Maix Board"
+
endchoice
+config SYS_ICACHE_OFF
+ bool "Do not enable icache"
+ default n
+ help
+ Do not enable instruction cache in U-Boot.
+
+config SPL_SYS_ICACHE_OFF
+ bool "Do not enable icache in SPL"
+ depends on SPL
+ default SYS_ICACHE_OFF
+ help
+ Do not enable instruction cache in SPL.
+
+config SYS_DCACHE_OFF
+ bool "Do not enable dcache"
+ default n
+ help
+ Do not enable data cache in U-Boot.
+
+config SPL_SYS_DCACHE_OFF
+ bool "Do not enable dcache in SPL"
+ depends on SPL
+ default SYS_DCACHE_OFF
+ help
+ Do not enable data cache in SPL.
+
# board-specific options below
source "board/AndesTech/ax25-ae350/Kconfig"
source "board/emulation/qemu-riscv/Kconfig"
+source "board/microchip/mpfs_icicle/Kconfig"
source "board/sifive/fu540/Kconfig"
+source "board/sipeed/maix/Kconfig"
# platform-specific options below
source "arch/riscv/cpu/ax25/Kconfig"
+source "arch/riscv/cpu/fu540/Kconfig"
source "arch/riscv/cpu/generic/Kconfig"
# architecture-specific options below
endchoice
+choice
+ prompt "SPL Run Mode"
+ default SPL_RISCV_MMODE
+ depends on SPL
+
+config SPL_RISCV_MMODE
+ bool "Machine"
+ help
+ Choose this option to build U-Boot SPL for RISC-V M-Mode.
+
+config SPL_RISCV_SMODE
+ bool "Supervisor"
+ help
+ Choose this option to build U-Boot SPL for RISC-V S-Mode.
+
+endchoice
+
config RISCV_ISA_C
bool "Emit compressed instructions"
default y
config SIFIVE_CLINT
bool
- depends on RISCV_MMODE
+ depends on RISCV_MMODE || SPL_RISCV_MMODE
select REGMAP
select SYSCON
+ select SPL_REGMAP if SPL
+ select SPL_SYSCON if SPL
help
The SiFive CLINT block holds memory-mapped control and status registers
associated with software and timer interrupts.
+config ANDES_PLIC
+ bool
+ depends on RISCV_MMODE || SPL_RISCV_MMODE
+ select REGMAP
+ select SYSCON
+ select SPL_REGMAP if SPL
+ select SPL_SYSCON if SPL
+ help
+ The Andes PLIC block holds memory-mapped claim and pending registers
+ associated with software interrupt.
+
+config ANDES_PLMT
+ bool
+ depends on RISCV_MMODE || SPL_RISCV_MMODE
+ select REGMAP
+ select SYSCON
+ select SPL_REGMAP if SPL
+ select SPL_SYSCON if SPL
+ help
+ The Andes PLMT block holds memory-mapped mtime register
+ associated with timer tick.
+
config RISCV_RDTIME
bool
- default y if RISCV_SMODE
+ default y if RISCV_SMODE || SPL_RISCV_SMODE
help
The provides the riscv_get_time() API that is implemented using the
standard rdtime instruction. This is the case for S-mode U-Boot, and
config SMP
bool "Symmetric Multi-Processing"
+ depends on SBI_V01 || !RISCV_SMODE
help
This enables support for systems with more than one CPU. If
you say N here, U-Boot will run on single and multiprocessor
machine. If you say Y here, U-Boot will run on many, but not
all, single processor machines.
+config SPL_SMP
+ bool "Symmetric Multi-Processing in SPL"
+ depends on SPL && SPL_RISCV_MMODE
+ default y
+ help
+ This enables support for systems with more than one CPU in SPL.
+ If you say N here, U-Boot SPL will run on single and multiprocessor
+ machines, but will use only one CPU of a multiprocessor
+ machine. If you say Y here, U-Boot SPL will run on many, but not
+ all, single processor machines.
+
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
- depends on SMP
+ depends on SMP || SPL_SMP
default 8
help
On multiprocessor machines, U-Boot sets up a stack for each CPU.
Stack memory is pre-allocated. U-Boot must therefore know the
maximum number of CPUs that may be present.
+config SBI
+ bool
+ default y if RISCV_SMODE || SPL_RISCV_SMODE
+
+choice
+ prompt "SBI support"
+ default SBI_V02
+
+config SBI_V01
+ bool "SBI v0.1 support"
+ depends on SBI
+ help
+ This config allows kernel to use SBI v0.1 APIs. This will be
+ deprecated in future once legacy M-mode software are no longer in use.
+
+config SBI_V02
+ bool "SBI v0.2 support"
+ depends on SBI
+ help
+ This config allows kernel to use SBI v0.2 APIs. SBI v0.2 is more
+ scalable and extendable to handle future needs for RISC-V supervisor
+ interfaces. For example, with SBI v0.2 HSM extension, only a single
+ hart need to boot and enter operating system. The booting hart can
+ bring up secondary harts one by one afterwards.
+
+ Choose this option if OpenSBI v0.7 or above release is used together
+ with U-Boot.
+
+endchoice
+
+config SBI_IPI
+ bool
+ depends on SBI
+ default y if RISCV_SMODE || SPL_RISCV_SMODE
+ depends on SMP
+
+config XIP
+ bool "XIP mode"
+ help
+ XIP (eXecute In Place) is a method for executing code directly
+ from a NOR flash memory without copying the code to ram.
+ Say yes here if U-Boot boots from flash directly.
+
+config SHOW_REGS
+ bool "Show registers on unhandled exception"
+
+config RISCV_PRIV_1_9
+ bool "Use version 1.9 of the RISC-V priviledged specification"
+ help
+ Older versions of the RISC-V priviledged specification had
+ separate counter enable CSRs for each privilege mode. Writing
+ to the unified mcounteren CSR on a processor implementing the
+ old specification will result in an illegal instruction
+ exception. In addition to counter CSR changes, the way virtual
+ memory is configured was also changed.
+
+config STACK_SIZE_SHIFT
+ int
+ default 14
+
endmenu