/* Architecture-specific global data */
struct arch_global_data {
-};
-
-/*
- * The following data structure is placed in some memory wich is
- * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
- * some locked parts of the data cache) to allow for a minimum set of
- * global variables during system initialization (until we have set
- * up the memory controller so that we can use RAM).
- */
-
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned int baudrate;
- unsigned long cpu_clk; /* CPU clock in Hz! */
- unsigned long bus_clk;
#if defined(CONFIG_8xx)
- unsigned long brg_clk;
+ unsigned long brg_clk;
#endif
#if defined(CONFIG_CPM2)
/* There are many clocks on the MPC8260 - see page 9-5 */
- unsigned long vco_out;
- unsigned long cpm_clk;
- unsigned long scc_clk;
- unsigned long brg_clk;
-#ifdef CONFIG_PCI
- unsigned long pci_clk;
+ unsigned long vco_out;
+ unsigned long cpm_clk;
+ unsigned long scc_clk;
+ unsigned long brg_clk;
#endif
+#if defined(CONFIG_QE)
+ u32 brg_clk;
#endif
- unsigned long mem_clk;
+ /* TODO: sjg@chromium.org: Should these be unslgned long? */
#if defined(CONFIG_MPC83xx)
/* There are other clocks in the MPC83XX */
u32 csb_clk;
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+# if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
-#elif defined(CONFIG_MPC8309)
+# elif defined(CONFIG_MPC8309)
u32 usbdr_clk;
-#endif
-#if defined (CONFIG_MPC834x)
+# endif
+# if defined(CONFIG_MPC834x)
u32 usbmph_clk;
-#endif /* CONFIG_MPC834x */
-#if defined(CONFIG_MPC8315)
+# endif /* CONFIG_MPC834x */
+# if defined(CONFIG_MPC8315)
u32 tdm_clk;
-#endif
+# endif
u32 core_clk;
u32 enc_clk;
u32 lbiu_clk;
u32 lclk_clk;
- u32 pci_clk;
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
+# if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC837x)
u32 pciexp1_clk;
u32 pciexp2_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
+# endif
+# if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
u32 sata_clk;
-#endif
-#if defined(CONFIG_MPC8360)
- u32 mem_sec_clk;
-#endif /* CONFIG_MPC8360 */
-#endif
-#if defined(CONFIG_FSL_ESDHC)
- u32 sdhc_clk;
+# endif
+# if defined(CONFIG_MPC8360)
+ u32 mem_sec_clk;
+# endif /* CONFIG_MPC8360 */
#endif
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
u32 lbc_clk;
void *cpu;
#endif /* CONFIG_MPC85xx || CONFIG_MPC86xx */
+};
+
+/*
+ * The following data structure is placed in some memory wich is
+ * available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
+ * some locked parts of the data cache) to allow for a minimum set of
+ * global variables during system initialization (until we have set
+ * up the memory controller so that we can use RAM).
+ */
+
+typedef struct global_data {
+ bd_t *bd;
+ unsigned long flags;
+ unsigned int baudrate;
+ unsigned long cpu_clk; /* CPU clock in Hz! */
+ unsigned long bus_clk;
+ /* We cannot bracket this with CONFIG_PCI due to mpc5xxx */
+ unsigned long pci_clk;
+ unsigned long mem_clk;
+#if defined(CONFIG_FSL_ESDHC)
+ u32 sdhc_clk;
+#endif
#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
u32 i2c1_clk;
u32 i2c2_clk;
#endif
#if defined(CONFIG_QE)
u32 qe_clk;
- u32 brg_clk;
uint mp_alloc_base;
uint mp_alloc_top;
#endif /* CONFIG_QE */
#endif
#if defined(CONFIG_MPC5xxx)
unsigned long ipb_clk;
- unsigned long pci_clk;
#endif
#if defined(CONFIG_MPC512X)
u32 ips_clk;
u32 csb_clk;
- u32 pci_clk;
#endif /* CONFIG_MPC512X */
#if defined(CONFIG_MPC8220)
unsigned long bExtUart;
unsigned long inp_clk;
- unsigned long pci_clk;
unsigned long vco_clk;
unsigned long pev_clk;
unsigned long flb_clk;