drivers, block: remove sil680 driver

[platform/kernel/u-boot.git] / arch / powerpc / cpu / ppc4xx / 44x_spd_ddr2.c

diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
index 87fd5e6..ffc62a5 100644 (file)
--- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
@@ -403,20 +403,20 @@ static unsigned char spd_read(uchar chip, uint addr)
 }
 
 /*-----------------------------------------------------------------------------+
- * initdram.  Initializes the 440SP Memory Queue and DDR SDRAM controller.
+ * dram_init.  Initializes the 440SP Memory Queue and DDR SDRAM controller.
  * Note: This routine runs from flash with a stack set up in the chip's
  * sram space.  It is important that the routine does not require .sbss, .bss or
  * .data sections.  It also cannot call routines that require these sections.
  *-----------------------------------------------------------------------------*/
 /*-----------------------------------------------------------------------------
- * Function:    initdram
+ * Function:    dram_init
  * Description:  Configures SDRAM memory banks for DDR operation.
  *              Auto Memory Configuration option reads the DDR SDRAM EEPROMs
  *              via the IIC bus and then configures the DDR SDRAM memory
  *              banks appropriately. If Auto Memory Configuration is
  *              not used, it is assumed that no DIMM is plugged
  *-----------------------------------------------------------------------------*/
-int initdram(void)
+int dram_init(void)
 {
        unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
        unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE};
@@ -2855,13 +2855,13 @@ static void test(void)
 #else /* CONFIG_SPD_EEPROM */
 
 /*-----------------------------------------------------------------------------
- * Function:   initdram
+ * Function:   dram_init
  * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller.
  *             The configuration is performed using static, compile-
  *             time parameters.
  *             Configures the PPC405EX(r) and PPC460EX/GT
  *---------------------------------------------------------------------------*/
-int initdram(void)
+int dram_init(void)
 {
        unsigned long val;