/*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
*
* This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
* arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
#include <common.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <asm/mp.h>
+#include <asm/fsl_enet.h>
+
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx))
+static int ft_del_cpuhandle(void *blob, int cpuhandle)
+{
+ int off, ret = -FDT_ERR_NOTFOUND;
+
+ /* if we find a match, we'll delete at it which point the offsets are
+ * invalid so we start over from the beginning
+ */
+ off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle",
+ &cpuhandle, 4);
+ while (off != -FDT_ERR_NOTFOUND) {
+ fdt_delprop(blob, off, "cpu-handle");
+ ret = 1;
+ off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle",
+ &cpuhandle, 4);
+ }
+
+ return ret;
+}
void ft_fixup_num_cores(void *blob) {
int off, num_cores, del_cores;
while (off != -FDT_ERR_NOTFOUND) {
u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- /* if we find a cpu node outside of what we expect delete it
- * and reset the offset back to the start since we can't
- * trust the offsets anymore
- */
- if (*reg > num_cores-1) {
- fdt_del_node(blob, off);
- del_cores++;
+ if ((*reg > num_cores-1) || (is_core_disabled(*reg))) {
+ int ph = fdt_get_phandle(blob, off);
+
+ /* Delete the cpu node once there are no cpu handles */
+ if (-FDT_ERR_NOTFOUND == ft_del_cpuhandle(blob, ph)) {
+ fdt_del_node(blob, off);
+ del_cores++;
+ }
+ /* either we deleted some cpu handles or the cpu node
+ * so we reset the offset back to the start since we
+ * can't trust the offsets anymore
+ */
off = -1;
}
off = fdt_node_offset_by_prop_value(blob, off,
debug ("deleted %d extra core entry entries from device tree\n",
del_cores);
}
+#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+void fdt_fixup_dr_usb(void *blob, bd_t *bd)
+{
+ char *mode;
+ char *type;
+ const char *compat = "fsl-usb2-dr";
+ const char *prop_mode = "dr_mode";
+ const char *prop_type = "phy_type";
+ int node_offset;
+ int err;
+
+ mode = getenv("usb_dr_mode");
+ type = getenv("usb_phy_type");
+ if (!mode && !type)
+ return;
+
+ node_offset = fdt_node_offset_by_compatible(blob, 0, compat);
+ if (node_offset < 0) {
+ printf("WARNING: could not find compatible node %s: %s.\n",
+ compat, fdt_strerror(node_offset));
+ return;
+ }
+
+ if (mode) {
+ err = fdt_setprop(blob, node_offset, prop_mode, mode,
+ strlen(mode) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop_mode, compat, fdt_strerror(err));
+ }
+
+ if (type) {
+ err = fdt_setprop(blob, node_offset, prop_type, type,
+ strlen(type) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop_type, compat, fdt_strerror(err));
+ }
+}
+#endif /* CONFIG_HAS_FSL_DR_USB */
+
+/*
+ * update crypto node properties to a specified revision of the SEC
+ * called with sec_rev == 0 if not on an E processor
+ */
+#if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+ const struct sec_rev_prop {
+ u32 sec_rev;
+ u32 num_channels;
+ u32 channel_fifo_len;
+ u32 exec_units_mask;
+ u32 descriptor_types_mask;
+ } sec_rev_prop_list [] = {
+ { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */
+ { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */
+ { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */
+ { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */
+ { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */
+ { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
+ { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
+ };
+ char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
+ sizeof("fsl,secX.Y")];
+ int crypto_node, sec_idx, err;
+ char *p;
+ u32 val;
+
+ /* locate crypto node based on lowest common compatible */
+ crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0");
+ if (crypto_node == -FDT_ERR_NOTFOUND)
+ return;
+
+ /* delete it if not on an E-processor */
+ if (crypto_node > 0 && !sec_rev) {
+ fdt_del_node(blob, crypto_node);
+ return;
+ }
+
+ /* else we got called for possible uprev */
+ for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++)
+ if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev)
+ break;
+
+ if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) {
+ puts("warning: unknown SEC revision number\n");
+ return;
+ }
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels);
+ err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask);
+ err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask);
+ err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len);
+ err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = 0;
+ while (sec_idx >= 0) {
+ p = compat_strlist + val;
+ val += sprintf(p, "fsl,sec%d.%d",
+ (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8,
+ sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1;
+ sec_idx--;
+ }
+ err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+}
+#elif CONFIG_SYS_FSL_SEC_COMPAT >= 4 /* SEC4 */
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+ if (!sec_rev)
+ fdt_del_node_and_alias(blob, "crypto");
+}
+#endif
+
+int fdt_fixup_phy_connection(void *blob, int offset, enum fsl_phy_enet_if phyc)
+{
+ static const char *fsl_phy_enet_if_str[] = {
+ [MII] = "mii",
+ [RMII] = "rmii",
+ [GMII] = "gmii",
+ [RGMII] = "rgmii",
+ [RGMII_ID] = "rgmii-id",
+ [RGMII_RXID] = "rgmii-rxid",
+ [SGMII] = "sgmii",
+ [TBI] = "tbi",
+ [RTBI] = "rtbi",
+ [XAUI] = "xgmii",
+ [FSL_ETH_IF_NONE] = "",
+ };
+
+ if (phyc > ARRAY_SIZE(fsl_phy_enet_if_str))
+ return fdt_setprop_string(blob, offset, "phy-connection-type", "");
+
+ return fdt_setprop_string(blob, offset, "phy-connection-type",
+ fsl_phy_enet_if_str[phyc]);
+}
projects / platform / kernel / u-boot.git / blobdiff