# endif
#endif
-#if defined(CONFIG_FADS)
- /* Enable RS232 */
-#if defined(CONFIG_8xx_CONS_SMC1)
- *((uint *) BCSR1) &= ~BCSR1_RS232EN_1;
-#else
- *((uint *) BCSR1) &= ~BCSR1_RS232EN_2;
-#endif
-#endif /* CONFIG_FADS */
-
-#if defined(CONFIG_RPXLITE)
- /* Enable Monitor Port Transceiver */
- *((uchar *) BCSR0) |= BCSR0_ENMONXCVR ;
-#endif /* CONFIG_RPXLITE */
-
/* Set the physical address of the host memory buffers in
* the buffer descriptors.
*/
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- /* allocate
- * size of struct serialbuffer with bd rx/tx, buffer rx/tx and rx index
- */
- dpaddr = dpram_alloc_align((sizeof(serialbuffer_t)), 8);
-#else
- dpaddr = CPM_SERIAL_BASE ;
-#endif
+ dpaddr = CPM_SERIAL_BASE;
rtx = (serialbuffer_t *)&cp->cp_dpmem[dpaddr];
/* Allocate space for two buffer descriptors in the DP ram.
volatile cpm8xx_t *cpmp = &(im->im_cpm);
volatile serialbuffer_t *rtx;
-#ifdef CONFIG_MODEM_SUPPORT
- if (gd->be_quiet)
- return;
-#endif
-
if (c == '\n')
smc_putc ('\r');
sp = (scc_t *) &(cp->cp_scc[SCC_INDEX]);
up = (scc_uart_t *) &cp->cp_dparam[PROFF_SCC];
-#if defined(CONFIG_LWMON) && defined(CONFIG_8xx_CONS_SCC2)
- { /* Disable Ethernet, enable Serial */
- uchar c;
-
- c = pic_read (0x61);
- c &= ~0x40; /* enable COM3 */
- c |= 0x80; /* disable Ethernet */
- pic_write (0x61, c);
-
- /* enable RTS2 */
- cp->cp_pbpar |= 0x2000;
- cp->cp_pbdat |= 0x2000;
- cp->cp_pbdir |= 0x2000;
- }
-#endif /* CONFIG_LWMON */
-
/* Disable transmitter/receiver. */
sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
cp->cp_pbdir &= ~0x06;
cp->cp_pbodr &= ~0x06;
-#elif (SCC_INDEX < 2) || !defined(CONFIG_IP860)
+#elif (SCC_INDEX < 2)
/*
* Standard configuration for SCC's is on Part A
*/
ip->iop_papar |= ((3 << (2 * SCC_INDEX)));
ip->iop_padir &= ~((3 << (2 * SCC_INDEX)));
ip->iop_paodr &= ~((3 << (2 * SCC_INDEX)));
-#else
- /*
- * The IP860 has SCC3 and SCC4 on Port D
- */
- ip->iop_pdpar |= ((3 << (2 * SCC_INDEX)));
#endif
/* Allocate space for two buffer descriptors in the DP ram. */
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
-#else
- dpaddr = CPM_SERIAL2_BASE ;
-#endif
+ dpaddr = dpram_alloc_align(sizeof(cbd_t)*2 + 2, 8);
/* Enable SDMA. */
im->im_siu_conf.sc_sdcr = 0x0001;
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
volatile cpm8xx_t *cpmp = &(im->im_cpm);
-#ifdef CONFIG_MODEM_SUPPORT
- if (gd->be_quiet)
- return;
-#endif
-
if (c == '\n')
scc_putc ('\r');
#endif
}
-#ifdef CONFIG_MODEM_SUPPORT
-void disable_putc(void)
-{
- gd->be_quiet = 1;
-}
-
-void enable_putc(void)
-{
- gd->be_quiet = 0;
-}
-#endif
-
#if defined(CONFIG_CMD_KGDB)
void