+// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2004, 2007-2011 Freescale Semiconductor, Inc.
*
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <cpu_func.h>
+#include <clock_legacy.h>
#include <ppc_asm.tmpl>
+#include <asm/global_data.h>
#include <linux/compiler.h>
#include <asm/processor.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SYS_FSL_NUM_CC_PLLS
-#define CONFIG_SYS_FSL_NUM_CC_PLLS 6
-#endif
/* --------------------------------------------------------------- */
void get_sys_info(sys_info_t *sys_info)
{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#ifdef CONFIG_FSL_IFC
- struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
- u32 ccr;
-#endif
+ volatile ccsr_gur_t *gur = (void *)(CFG_SYS_MPC85xx_GUTS_ADDR);
#ifdef CONFIG_FSL_CORENET
- volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
+ volatile ccsr_clk_t *clk = (void *)(CFG_SYS_FSL_CORENET_CLK_ADDR);
unsigned int cpu;
+#ifdef CONFIG_HETROGENOUS_CLUSTERS
+ unsigned int dsp_cpu;
+ uint rcw_tmp1, rcw_tmp2;
+#endif
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
- int cc_group[12] = CONFIG_SYS_FSL_CLUSTER_CLOCKS;
+ int cc_group[12] = CFG_SYS_FSL_CLUSTER_CLOCKS;
#endif
__maybe_unused u32 svr;
uint rcw_tmp;
#endif
uint ratio[CONFIG_SYS_FSL_NUM_CC_PLLS];
- unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
+ unsigned long sysclk = get_board_sys_clk();
uint mem_pll_rat;
sys_info->freq_systembus = sysclk;
* are driven by differential sysclock.
*/
if (ddr_refclk_sel == FSL_CORENET2_RCWSR5_DDR_REFCLK_SINGLE_CLK)
- sys_info->freq_ddrbus = CONFIG_SYS_CLK_FREQ;
+ sys_info->freq_ddrbus = get_board_sys_clk();
else
#endif
-#ifdef CONFIG_DDR_CLK_FREQ
- sys_info->freq_ddrbus = CONFIG_DDR_CLK_FREQ;
+#if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || defined(CONFIG_STATIC_DDR_CLK_FREQ)
+ sys_info->freq_ddrbus = get_board_ddr_clk();
#else
sys_info->freq_ddrbus = sysclk;
#endif
* it uses 6.
* T2080 rev 1.1 and later also use half mem_pll comparing with rev 1.0
*/
-#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \
- defined(CONFIG_PPC_T4080) || defined(CONFIG_PPC_T2080)
+#if defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T2080)
svr = get_svr();
switch (SVR_SOC_VER(svr)) {
case SVR_T4240:
else
freq_c_pll[i] = sys_info->freq_systembus * ratio[i];
}
+
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
/*
* As per CHASSIS2 architeture total 12 clusters are posible and
sys_info->freq_processor[cpu] =
freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
}
-#if defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_B4420) || \
- defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
+
+#ifdef CONFIG_HETROGENOUS_CLUSTERS
+ for_each_cpu(i, dsp_cpu, cpu_num_dspcores(), cpu_dsp_mask()) {
+ int dsp_cluster = fsl_qoriq_dsp_core_to_cluster(dsp_cpu);
+ u32 c_pll_sel = (in_be32
+ (&clk->clkcsr[dsp_cluster].clkcncsr) >> 27)
+ & 0xf;
+ u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+ cplx_pll += cc_group[dsp_cluster] - 1;
+ sys_info->freq_processor_dsp[dsp_cpu] =
+ freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
+ }
+#endif
+
+#if defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420) || \
+ defined(CONFIG_ARCH_T2080)
#define FM1_CLK_SEL 0xe0000000
#define FM1_CLK_SHIFT 29
-#elif defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023)
+#elif defined(CONFIG_ARCH_T1024)
#define FM1_CLK_SEL 0x00000007
#define FM1_CLK_SHIFT 0
#else
#define FM1_CLK_SHIFT 26
#endif
#if !defined(CONFIG_FM_PLAT_CLK_DIV) || !defined(CONFIG_PME_PLAT_CLK_DIV)
-#if defined(CONFIG_PPC_T1024) || defined(CONFIG_PPC_T1023)
+#if defined(CONFIG_ARCH_T1024)
rcw_tmp = in_be32(&gur->rcwsr[15]) - 4;
#else
rcw_tmp = in_be32(&gur->rcwsr[7]);
sys_info->freq_qman = sys_info->freq_systembus / CONFIG_QBMAN_CLK_DIV;
#endif
+#if defined(CONFIG_SYS_MAPLE)
+#define CPRI_CLK_SEL 0x1C000000
+#define CPRI_CLK_SHIFT 26
+#define CPRI_ALT_CLK_SEL 0x00007000
+#define CPRI_ALT_CLK_SHIFT 12
+
+ rcw_tmp1 = in_be32(&gur->rcwsr[7]); /* Reading RCW bits: 224-255*/
+ rcw_tmp2 = in_be32(&gur->rcwsr[15]); /* Reading RCW bits: 480-511*/
+ /* For MAPLE and CPRI frequency */
+ switch ((rcw_tmp1 & CPRI_CLK_SEL) >> CPRI_CLK_SHIFT) {
+ case 1:
+ sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK];
+ sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK];
+ break;
+ case 2:
+ sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 2;
+ sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 2;
+ break;
+ case 3:
+ sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 3;
+ sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 3;
+ break;
+ case 4:
+ sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 4;
+ sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK] / 4;
+ break;
+ case 5:
+ if (((rcw_tmp2 & CPRI_ALT_CLK_SEL)
+ >> CPRI_ALT_CLK_SHIFT) == 6) {
+ sys_info->freq_maple =
+ freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 2;
+ sys_info->freq_cpri =
+ freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 2;
+ }
+ if (((rcw_tmp2 & CPRI_ALT_CLK_SEL)
+ >> CPRI_ALT_CLK_SHIFT) == 7) {
+ sys_info->freq_maple =
+ freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 3;
+ sys_info->freq_cpri =
+ freq_c_pll[CONFIG_SYS_CPRI_CLK - 2] / 3;
+ }
+ break;
+ case 6:
+ sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 2;
+ sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 2;
+ break;
+ case 7:
+ sys_info->freq_maple = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 3;
+ sys_info->freq_cpri = freq_c_pll[CONFIG_SYS_CPRI_CLK + 1] / 3;
+ break;
+ default:
+ printf("Error: Unknown MAPLE/CPRI clock select!\n");
+ }
+
+ /* For MAPLE ULB and eTVPE frequencies */
+#define ULB_CLK_SEL 0x00000038
+#define ULB_CLK_SHIFT 3
+#define ETVPE_CLK_SEL 0x00000007
+#define ETVPE_CLK_SHIFT 0
+
+ switch ((rcw_tmp2 & ULB_CLK_SEL) >> ULB_CLK_SHIFT) {
+ case 1:
+ sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK];
+ break;
+ case 2:
+ sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK] / 2;
+ break;
+ case 3:
+ sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK] / 3;
+ break;
+ case 4:
+ sys_info->freq_maple_ulb = freq_c_pll[CONFIG_SYS_ULB_CLK] / 4;
+ break;
+ case 5:
+ sys_info->freq_maple_ulb = sys_info->freq_systembus;
+ break;
+ case 6:
+ sys_info->freq_maple_ulb =
+ freq_c_pll[CONFIG_SYS_ULB_CLK - 1] / 2;
+ break;
+ case 7:
+ sys_info->freq_maple_ulb =
+ freq_c_pll[CONFIG_SYS_ULB_CLK - 1] / 3;
+ break;
+ default:
+ printf("Error: Unknown MAPLE ULB clock select!\n");
+ }
+
+ switch ((rcw_tmp2 & ETVPE_CLK_SEL) >> ETVPE_CLK_SHIFT) {
+ case 1:
+ sys_info->freq_maple_etvpe = freq_c_pll[CONFIG_SYS_ETVPE_CLK];
+ break;
+ case 2:
+ sys_info->freq_maple_etvpe =
+ freq_c_pll[CONFIG_SYS_ETVPE_CLK] / 2;
+ break;
+ case 3:
+ sys_info->freq_maple_etvpe =
+ freq_c_pll[CONFIG_SYS_ETVPE_CLK] / 3;
+ break;
+ case 4:
+ sys_info->freq_maple_etvpe =
+ freq_c_pll[CONFIG_SYS_ETVPE_CLK] / 4;
+ break;
+ case 5:
+ sys_info->freq_maple_etvpe = sys_info->freq_systembus;
+ break;
+ case 6:
+ sys_info->freq_maple_etvpe =
+ freq_c_pll[CONFIG_SYS_ETVPE_CLK - 1] / 2;
+ break;
+ case 7:
+ sys_info->freq_maple_etvpe =
+ freq_c_pll[CONFIG_SYS_ETVPE_CLK - 1] / 3;
+ break;
+ default:
+ printf("Error: Unknown MAPLE eTVPE clock select!\n");
+ }
+
+#endif
+
#ifdef CONFIG_SYS_DPAA_FMAN
#ifndef CONFIG_FM_PLAT_CLK_DIV
switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
plat_ratio = (gur->porpllsr) & 0x0000003e;
plat_ratio >>= 1;
- sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ;
+ sys_info->freq_systembus = plat_ratio * get_board_sys_clk();
/* Divide before multiply to avoid integer
* overflow for processor speeds above 2GHz */
/* Note: freq_ddrbus is the MCLK frequency, not the data rate. */
sys_info->freq_ddrbus = sys_info->freq_systembus;
-#ifdef CONFIG_DDR_CLK_FREQ
+#if defined(CONFIG_DYNAMIC_DDR_CLK_FREQ) || defined(CONFIG_STATIC_DDR_CLK_FREQ)
{
u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
if (ddr_ratio != 0x7)
- sys_info->freq_ddrbus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
+ sys_info->freq_ddrbus = ddr_ratio * get_board_ddr_clk();
}
#endif
#ifdef CONFIG_QE
-#if defined(CONFIG_P1012) || defined(CONFIG_P1021) || defined(CONFIG_P1025)
+#if defined(CONFIG_ARCH_P1021) || defined(CONFIG_ARCH_P1025)
sys_info->freq_qe = sys_info->freq_systembus;
#else
qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
>> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
- sys_info->freq_qe = qe_ratio * CONFIG_SYS_CLK_FREQ;
+ sys_info->freq_qe = qe_ratio * get_board_sys_clk();
#endif
#endif
#endif /* CONFIG_FSL_CORENET */
#if defined(CONFIG_FSL_LBC)
- uint lcrr_div;
-#if defined(CONFIG_SYS_LBC_LCRR)
- /* We will program LCRR to this value later */
- lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
-#else
- lcrr_div = in_be32(&(LBC_BASE_ADDR)->lcrr) & LCRR_CLKDIV;
-#endif
- if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
-#if defined(CONFIG_FSL_CORENET)
- /* If this is corenet based SoC, bit-representation
- * for four times the clock divider values.
- */
- lcrr_div *= 4;
-#elif !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \
- !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560)
- /*
- * Yes, the entire PQ38 family use the same
- * bit-representation for twice the clock divider values.
- */
- lcrr_div *= 2;
-#endif
- sys_info->freq_localbus = sys_info->freq_systembus / lcrr_div;
- } else {
- /* In case anyone cares what the unknown value is */
- sys_info->freq_localbus = lcrr_div;
- }
+ sys_info->freq_localbus = sys_info->freq_systembus /
+ CONFIG_SYS_FSL_LBC_CLK_DIV;
#endif
#if defined(CONFIG_FSL_IFC)
- ccr = ifc_in32(&ifc_regs->ifc_ccr);
- ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
-
- sys_info->freq_localbus = sys_info->freq_systembus / ccr;
+ sys_info->freq_localbus = sys_info->freq_systembus /
+ CONFIG_SYS_FSL_IFC_CLK_DIV;
#endif
}
-
-int get_clocks (void)
+int get_clocks(void)
{
sys_info_t sys_info;
-#ifdef CONFIG_MPC8544
- volatile ccsr_gur_t *gur = (void *) CONFIG_SYS_MPC85xx_GUTS_ADDR;
-#endif
-#if defined(CONFIG_CPM2)
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- uint sccr, dfbrg;
-
- /* set VCO = 4 * BRG */
- cpm->im_cpm_intctl.sccr &= 0xfffffffc;
- sccr = cpm->im_cpm_intctl.sccr;
- dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
+#ifdef CONFIG_ARCH_MPC8544
+ volatile ccsr_gur_t *gur = (void *) CFG_SYS_MPC85xx_GUTS_ADDR;
#endif
get_sys_info (&sys_info);
gd->cpu_clk = sys_info.freq_processor[0];
* for that SOC. This information is taken from application note
* AN2919.
*/
-#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
- defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555) || \
- defined(CONFIG_P1022)
+#if defined(CONFIG_ARCH_MPC8540) || defined(CONFIG_ARCH_MPC8560)
gd->arch.i2c1_clk = sys_info.freq_systembus;
-#elif defined(CONFIG_MPC8544)
+#elif defined(CONFIG_ARCH_MPC8544)
/*
* On the 8544, the I2C clock is the same as the SEC clock. This can be
* either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See
gd->arch.i2c2_clk = gd->arch.i2c1_clk;
#if defined(CONFIG_FSL_ESDHC)
-#if defined(CONFIG_MPC8569) || defined(CONFIG_P1010) ||\
- defined(CONFIG_P1014)
+#if defined(CONFIG_ARCH_P1010)
gd->arch.sdhc_clk = gd->bus_clk;
#else
gd->arch.sdhc_clk = gd->bus_clk / 2;
#endif
#endif /* defined(CONFIG_FSL_ESDHC) */
-#if defined(CONFIG_CPM2)
- gd->arch.vco_out = 2*sys_info.freq_systembus;
- gd->arch.cpm_clk = gd->arch.vco_out / 2;
- gd->arch.scc_clk = gd->arch.vco_out / 4;
- gd->arch.brg_clk = gd->arch.vco_out / (1 << (2 * (dfbrg + 1)));
-#endif
-
if(gd->cpu_clk != 0) return (0);
else return (1);
}
* get_bus_freq
* return system bus freq in Hz
*********************************************/
-ulong get_bus_freq (ulong dummy)
+ulong get_bus_freq(ulong dummy)
{
return gd->bus_clk;
}
projects / platform / kernel / u-boot.git / blobdiff