printf("Corenet Platform Cache: %d KB enabled\n", size);
}
-void invalidate_cpc(void)
+static void invalidate_cpc(void)
{
int i;
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
/* Look through the remaining clusters, and set up their caches */
do {
+ int j, cluster_valid = 0;
+
l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
+
cluster = in_be32(&gur->tp_cluster[i].lower);
- /* set stash ID to (cluster) * 2 + 32 + 1 */
- clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
+ /* check that at least one core/accel is enabled in cluster */
+ for (j = 0; j < 4; j++) {
+ u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
+ u32 type = in_be32(&gur->tp_ityp[idx]);
+
+ if (type & TP_ITYP_AV)
+ cluster_valid = 1;
+ }
- printf("enable l2 for cluster %d %p\n", i, l2cache);
+ if (cluster_valid) {
+ /* set stash ID to (cluster) * 2 + 32 + 1 */
+ clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
- out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
- while ((in_be32(&l2cache->l2csr0) &
- (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
- ;
- out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+ printf("enable l2 for cluster %d %p\n", i, l2cache);
+
+ out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
+ while ((in_be32(&l2cache->l2csr0)
+ & (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
+ ;
+ out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE|L2CSR0_L2REP_MODE);
+ }
i++;
} while (!(cluster & TP_CLUSTER_EOC));
#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
#endif
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
+ extern int spin_table_compat;
+ const char *spin;
+#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
}
#endif
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
+ spin = getenv("spin_table_compat");
+ if (spin && (*spin == 'n'))
+ spin_table_compat = 0;
+ else
+ spin_table_compat = 1;
+#endif
+
puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
l2srbar = CONFIG_SYS_INIT_L2_ADDR;
l2cache->l2srbar0 = l2srbar;
- printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
+ printf(", moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
}
#endif /* CONFIG_SYS_INIT_L2_ADDR */
puts("\n");
/* needs to be in ram since code uses global static vars */
fsl_serdes_init();
+#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
+ if (IS_SVR_REV(svr, 1, 0)) {
+ int i;
+ __be32 *p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb004c;
+
+ for (i = 0; i < 12; i++) {
+ p += i + (i > 5 ? 11 : 0);
+ out_be32(p, 0x2);
+ }
+ p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb0108;
+ out_be32(p, 0x34);
+ }
+#endif
+
#ifdef CONFIG_SYS_SRIO
srio_init();
-#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
+#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
char *s = getenv("bootmaster");
if (s) {
if (!strcmp(s, "SRIO1")) {
}
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_USB14
+ /* On P204x/P304x/P50x0 Rev1.0, USB transmit will result internal
+ * multi-bit ECC errors which has impact on performance, so software
+ * should disable all ECC reporting from USB1 and USB2.
+ */
+ if (IS_SVR_REV(get_svr(), 1, 0)) {
+ struct dcsr_dcfg_regs *dcfg = (struct dcsr_dcfg_regs *)
+ (CONFIG_SYS_DCSRBAR + CONFIG_SYS_DCSR_DCFG_OFFSET);
+ setbits_be32(&dcfg->ecccr1,
+ (DCSR_DCFG_ECC_DISABLE_USB1 |
+ DCSR_DCFG_ECC_DISABLE_USB2));
+ }
+#endif
+
+#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
+ ccsr_usb_phy_t *usb_phy =
+ (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
+ setbits_be32(&usb_phy->pllprg[1],
+ CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN |
+ CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN |
+ CONFIG_SYS_FSL_USB_PLLPRG2_MFI |
+ CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN);
+ setbits_be32(&usb_phy->port1.ctrl,
+ CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+ setbits_be32(&usb_phy->port1.drvvbuscfg,
+ CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+ setbits_be32(&usb_phy->port1.pwrfltcfg,
+ CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+ setbits_be32(&usb_phy->port2.ctrl,
+ CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+ setbits_be32(&usb_phy->port2.drvvbuscfg,
+ CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+ setbits_be32(&usb_phy->port2.pwrfltcfg,
+ CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+#endif
+
#ifdef CONFIG_FMAN_ENET
fman_enet_init();
#endif