ata: Migrate CONFIG_SATA_SIL to Kconfig

[platform/kernel/u-boot.git] / arch / powerpc / cpu / mpc85xx / Kconfig

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index bfa63e4..1b0e3d3 100644 (file)
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -4,6 +4,14 @@ menu "mpc85xx CPU"
 config SYS_CPU
        default "mpc85xx"
 
+config CMD_ERRATA
+       bool "Enable the 'errata' command"
+       depends on MPC85xx
+       default y
+       help
+         This enables the 'errata' command which displays a list of errata
+         work-arounds which are enabled for the current board.
+
 choice
        prompt "Target select"
        optional
@@ -55,34 +63,35 @@ config TARGET_P3041DS
        select PHYS_64BIT
        select ARCH_P3041
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
+       imply CMD_SATA
 
 config TARGET_P4080DS
        bool "Support P4080DS"
        select PHYS_64BIT
        select ARCH_P4080
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
+       imply CMD_SATA
 
 config TARGET_P5020DS
        bool "Support P5020DS"
        select PHYS_64BIT
        select ARCH_P5020
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
+       imply CMD_SATA
 
 config TARGET_P5040DS
        bool "Support P5040DS"
        select PHYS_64BIT
        select ARCH_P5040
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
+       imply CMD_SATA
 
 config TARGET_MPC8536DS
        bool "Support MPC8536DS"
        select ARCH_MPC8536
 # Use DDR3 controller with DDR2 DIMMs on this board
        select SYS_FSL_DDRC_GEN3
-
-config TARGET_MPC8540ADS
-       bool "Support MPC8540ADS"
-       select ARCH_MPC8540
+       imply CMD_SATA
 
 config TARGET_MPC8541CDS
        bool "Support MPC8541CDS"
@@ -100,10 +109,6 @@ config TARGET_MPC8555CDS
        bool "Support MPC8555CDS"
        select ARCH_MPC8555
 
-config TARGET_MPC8560ADS
-       bool "Support MPC8560ADS"
-       select ARCH_MPC8560
-
 config TARGET_MPC8568MDS
        bool "Support MPC8568MDS"
        select ARCH_MPC8568
@@ -117,6 +122,7 @@ config TARGET_MPC8572DS
        select ARCH_MPC8572
 # Use DDR3 controller with DDR2 DIMMs on this board
        select SYS_FSL_DDRC_GEN3
+       imply SCSI
 
 config TARGET_P1010RDB_PA
        bool "Support P1010RDB_PA"
@@ -124,6 +130,8 @@ config TARGET_P1010RDB_PA
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select SUPPORT_TPL
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1010RDB_PB
        bool "Support P1010RDB_PB"
@@ -131,64 +139,86 @@ config TARGET_P1010RDB_PB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select SUPPORT_TPL
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1022DS
        bool "Support P1022DS"
        select ARCH_P1022
        select SUPPORT_SPL
        select SUPPORT_TPL
+       imply CMD_SATA
 
 config TARGET_P1023RDB
        bool "Support P1023RDB"
        select ARCH_P1023
+       imply CMD_EEPROM
 
 config TARGET_P1020MBG
        bool "Support P1020MBG-PC"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1020
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1020RDB_PC
        bool "Support P1020RDB-PC"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1020
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1020RDB_PD
        bool "Support P1020RDB-PD"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1020
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1020UTM
        bool "Support P1020UTM"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1020
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1021RDB
        bool "Support P1021RDB"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1021
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1024RDB
        bool "Support P1024RDB"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1024
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_P1025RDB
        bool "Support P1025RDB"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P1025
+       imply CMD_EEPROM
+       imply CMD_SATA
+       imply SATA_SIL
 
 config TARGET_P2020RDB
        bool "Support P2020RDB-PC"
        select SUPPORT_SPL
        select SUPPORT_TPL
        select ARCH_P2020
+       imply CMD_EEPROM
+       imply CMD_SATA
+       imply SATA_SIL
 
 config TARGET_P1_TWR
        bool "Support p1_twr"
@@ -199,6 +229,7 @@ config TARGET_P2041RDB
        select ARCH_P2041
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_QEMU_PPCE500
        bool "Support qemu-ppce500"
@@ -211,6 +242,8 @@ config TARGET_T1024QDS
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_T1023RDB
        bool "Support T1023RDB"
@@ -218,6 +251,7 @@ config TARGET_T1023RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_EEPROM
 
 config TARGET_T1024RDB
        bool "Support T1024RDB"
@@ -225,12 +259,15 @@ config TARGET_T1024RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_EEPROM
 
 config TARGET_T1040QDS
        bool "Support T1040QDS"
        select ARCH_T1040
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select PHYS_64BIT
+       imply CMD_EEPROM
+       imply CMD_SATA
 
 config TARGET_T1040RDB
        bool "Support T1040RDB"
@@ -238,6 +275,7 @@ config TARGET_T1040RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T1040D4RDB
        bool "Support T1040D4RDB"
@@ -245,6 +283,7 @@ config TARGET_T1040D4RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T1042RDB
        bool "Support T1042RDB"
@@ -252,6 +291,7 @@ config TARGET_T1042RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T1042D4RDB
        bool "Support T1042D4RDB"
@@ -259,6 +299,7 @@ config TARGET_T1042D4RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T1042RDB_PI
        bool "Support T1042RDB_PI"
@@ -266,6 +307,7 @@ config TARGET_T1042RDB_PI
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T2080QDS
        bool "Support T2080QDS"
@@ -273,6 +315,7 @@ config TARGET_T2080QDS
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T2080RDB
        bool "Support T2080RDB"
@@ -280,6 +323,7 @@ config TARGET_T2080RDB
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T2081QDS
        bool "Support T2081QDS"
@@ -293,6 +337,7 @@ config TARGET_T4160QDS
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T4160RDB
        bool "Support T4160RDB"
@@ -306,12 +351,14 @@ config TARGET_T4240QDS
        select BOARD_LATE_INIT if CHAIN_OF_TRUST
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_T4240RDB
        bool "Support T4240RDB"
        select ARCH_T4240
        select SUPPORT_SPL
        select PHYS_64BIT
+       imply CMD_SATA
 
 config TARGET_CONTROLCENTERD
        bool "Support controlcenterd"
@@ -321,6 +368,8 @@ config TARGET_KMP204X
        bool "Support kmp204x"
        select ARCH_P2041
        select PHYS_64BIT
+       imply CMD_CRAMFS
+       imply FS_CRAMFS
 
 config TARGET_XPEDITE520X
        bool "Support xpedite520x"
@@ -339,6 +388,7 @@ config TARGET_XPEDITE550X
 config TARGET_UCP1020
        bool "Support uCP1020"
        select ARCH_P1020
+       imply CMD_SATA
 
 config TARGET_CYRUS_P5020
        bool "Support Varisys Cyrus P5020"
@@ -374,6 +424,10 @@ config ARCH_B4420
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
+       select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_B4860
        bool
@@ -390,6 +444,7 @@ config ARCH_B4860
        select SYS_FSL_ERRATUM_A007075
        select SYS_FSL_ERRATUM_A007186
        select SYS_FSL_ERRATUM_A007212
+       select SYS_FSL_ERRATUM_A007907
        select SYS_FSL_ERRATUM_A009942
        select SYS_FSL_HAS_DDR3
        select SYS_FSL_HAS_SEC
@@ -397,6 +452,10 @@ config ARCH_B4860
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
+       select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_BSC9131
        bool
@@ -409,6 +468,10 @@ config ARCH_BSC9131
        select SYS_FSL_HAS_SEC
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
+       select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_BSC9132
        bool
@@ -425,6 +488,12 @@ config ARCH_BSC9132
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_MTDPARTS
+       imply CMD_NAND
+       imply CMD_PCI
+       imply CMD_REGINFO
 
 config ARCH_C29X
        bool
@@ -437,6 +506,10 @@ config ARCH_C29X
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_6
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_IFC
+       imply CMD_NAND
+       imply CMD_PCI
+       imply CMD_REGINFO
 
 config ARCH_MPC8536
        bool
@@ -449,6 +522,10 @@ config ARCH_MPC8536
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_ELBC
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_MPC8540
        bool
@@ -472,6 +549,7 @@ config ARCH_MPC8544
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_ELBC
 
 config ARCH_MPC8548
        bool
@@ -487,6 +565,7 @@ config ARCH_MPC8548
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
+       imply CMD_REGINFO
 
 config ARCH_MPC8555
        bool
@@ -518,6 +597,8 @@ config ARCH_MPC8569
        select SYS_FSL_HAS_SEC
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
+       select FSL_ELBC
+       imply CMD_NAND
 
 config ARCH_MPC8572
        bool
@@ -532,6 +613,8 @@ config ARCH_MPC8572
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_ELBC
+       imply CMD_NAND
 
 config ARCH_P1010
        bool
@@ -552,6 +635,13 @@ config ARCH_P1010
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_MTDPARTS
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_PCI
+       imply CMD_REGINFO
 
 config ARCH_P1011
        bool
@@ -565,6 +655,7 @@ config ARCH_P1011
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_ELBC
 
 config ARCH_P1020
        bool
@@ -578,6 +669,12 @@ config ARCH_P1020
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_ELBC
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_PCI
+       imply CMD_REGINFO
+       imply SATA_SIL
 
 config ARCH_P1021
        bool
@@ -591,6 +688,12 @@ config ARCH_P1021
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_ELBC
+       imply CMD_REGINFO
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_REGINFO
+       imply SATA_SIL
 
 config ARCH_P1022
        bool
@@ -606,6 +709,7 @@ config ARCH_P1022
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_ELBC
 
 config ARCH_P1023
        bool
@@ -617,6 +721,7 @@ config ARCH_P1023
        select SYS_FSL_HAS_SEC
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
+       select FSL_ELBC
 
 config ARCH_P1024
        bool
@@ -630,6 +735,13 @@ config ARCH_P1024
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_ELBC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_PCI
+       imply CMD_REGINFO
+       imply SATA_SIL
 
 config ARCH_P1025
        bool
@@ -643,6 +755,9 @@ config ARCH_P1025
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_ELBC
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_P2020
        bool
@@ -657,6 +772,10 @@ config ARCH_P2020
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_2
        select SYS_PPC_E500_USE_DEBUG_TLB
+       select FSL_ELBC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_P2041
        bool
@@ -678,6 +797,8 @@ config ARCH_P2041
        select SYS_FSL_QORIQ_CHASSIS1
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
+       select FSL_ELBC
+       imply CMD_NAND
 
 config ARCH_P3041
        bool
@@ -701,6 +822,10 @@ config ARCH_P3041
        select SYS_FSL_QORIQ_CHASSIS1
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
+       select FSL_ELBC
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_P4080
        bool
@@ -735,6 +860,10 @@ config ARCH_P4080
        select SYS_FSL_QORIQ_CHASSIS1
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
+       select FSL_ELBC
+       imply CMD_SATA
+       imply CMD_REGINFO
+       imply SATA_SIL
 
 config ARCH_P5020
        bool
@@ -755,6 +884,9 @@ config ARCH_P5020
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
+       select FSL_ELBC
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_P5040
        bool
@@ -775,6 +907,9 @@ config ARCH_P5040
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
+       select FSL_ELBC
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_QEMU_E500
        bool
@@ -794,6 +929,10 @@ config ARCH_T1023
        select SYS_FSL_QORIQ_CHASSIS2
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_5
+       select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_T1024
        bool
@@ -810,6 +949,11 @@ config ARCH_T1024
        select SYS_FSL_QORIQ_CHASSIS2
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_5
+       select FSL_IFC
+       imply CMD_EEPROM
+       imply CMD_NAND
+       imply CMD_MTDPARTS
+       imply CMD_REGINFO
 
 config ARCH_T1040
        bool
@@ -827,6 +971,11 @@ config ARCH_T1040
        select SYS_FSL_QORIQ_CHASSIS2
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_5
+       select FSL_IFC
+       imply CMD_MTDPARTS
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_T1042
        bool
@@ -844,6 +993,11 @@ config ARCH_T1042
        select SYS_FSL_QORIQ_CHASSIS2
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_5
+       select FSL_IFC
+       imply CMD_MTDPARTS
+       imply CMD_NAND
+       imply CMD_SATA
+       imply CMD_REGINFO
 
 config ARCH_T2080
        bool
@@ -855,6 +1009,8 @@ config ARCH_T2080
        select SYS_FSL_ERRATUM_A006593
        select SYS_FSL_ERRATUM_A007186
        select SYS_FSL_ERRATUM_A007212
+       select SYS_FSL_ERRATUM_A007815
+       select SYS_FSL_ERRATUM_A007907
        select SYS_FSL_ERRATUM_A009942
        select SYS_FSL_ERRATUM_ESDHC111
        select SYS_FSL_HAS_DDR3
@@ -863,6 +1019,10 @@ config ARCH_T2080
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
+       select FSL_IFC
+       imply CMD_SATA
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_T2081
        bool
@@ -882,6 +1042,9 @@ config ARCH_T2081
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
+       select FSL_IFC
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_T4160
        bool
@@ -902,6 +1065,10 @@ config ARCH_T4160
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
+       select FSL_IFC
+       imply CMD_SATA
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config ARCH_T4240
        bool
@@ -916,6 +1083,8 @@ config ARCH_T4240
        select SYS_FSL_ERRATUM_A006593
        select SYS_FSL_ERRATUM_A007186
        select SYS_FSL_ERRATUM_A007798
+       select SYS_FSL_ERRATUM_A007815
+       select SYS_FSL_ERRATUM_A007907
        select SYS_FSL_ERRATUM_A009942
        select SYS_FSL_HAS_DDR3
        select SYS_FSL_HAS_SEC
@@ -923,6 +1092,10 @@ config ARCH_T4240
        select SYS_FSL_SEC_BE
        select SYS_FSL_SEC_COMPAT_4
        select SYS_PPC64
+       select FSL_IFC
+       imply CMD_SATA
+       imply CMD_NAND
+       imply CMD_REGINFO
 
 config BOOKE
        bool
@@ -936,6 +1109,7 @@ config E500
 
 config E500MC
        bool
+       imply CMD_PCI
        help
                Enble PowerPC E500MC core
 
@@ -1103,9 +1277,15 @@ config SYS_FSL_ERRATUM_A007186
 config SYS_FSL_ERRATUM_A007212
        bool
 
+config SYS_FSL_ERRATUM_A007815
+       bool
+
 config SYS_FSL_ERRATUM_A007798
        bool
 
+config SYS_FSL_ERRATUM_A007907
+       bool
+
 config SYS_FSL_ERRATUM_A008044
        bool
 
@@ -1249,6 +1429,12 @@ config SYS_PPC64
 config SYS_PPC_E500_USE_DEBUG_TLB
        bool
 
+config FSL_IFC
+       bool
+
+config FSL_ELBC
+       bool
+
 config SYS_PPC_E500_DEBUG_TLB
        int "Temporary TLB entry for external debugger"
        depends on SYS_PPC_E500_USE_DEBUG_TLB
@@ -1273,18 +1459,50 @@ config SYS_PPC_E500_DEBUG_TLB
                 symbol should be set to the TLB1 entry to be used for this
                 purpose. If unsure, do not change.
 
+config SYS_FSL_IFC_CLK_DIV
+       int "Divider of platform clock"
+       depends on FSL_IFC
+       default 2 if    ARCH_B4420      || \
+                       ARCH_B4860      || \
+                       ARCH_T1024      || \
+                       ARCH_T1023      || \
+                       ARCH_T1040      || \
+                       ARCH_T1042      || \
+                       ARCH_T4160      || \
+                       ARCH_T4240
+       default 1
+       help
+               Defines divider of platform clock(clock input to
+               IFC controller).
+
+config SYS_FSL_LBC_CLK_DIV
+       int "Divider of platform clock"
+       depends on FSL_ELBC || ARCH_MPC8540 || \
+               ARCH_MPC8548 || ARCH_MPC8541 || \
+               ARCH_MPC8555 || ARCH_MPC8560 || \
+               ARCH_MPC8568
+
+       default 2 if    ARCH_P2041      || \
+                       ARCH_P3041      || \
+                       ARCH_P4080      || \
+                       ARCH_P5020      || \
+                       ARCH_P5040
+       default 1
+
+       help
+               Defines divider of platform clock(clock input to
+               eLBC controller).
+
 source "board/freescale/b4860qds/Kconfig"
 source "board/freescale/bsc9131rdb/Kconfig"
 source "board/freescale/bsc9132qds/Kconfig"
 source "board/freescale/c29xpcie/Kconfig"
 source "board/freescale/corenet_ds/Kconfig"
 source "board/freescale/mpc8536ds/Kconfig"
-source "board/freescale/mpc8540ads/Kconfig"
 source "board/freescale/mpc8541cds/Kconfig"
 source "board/freescale/mpc8544ds/Kconfig"
 source "board/freescale/mpc8548cds/Kconfig"
 source "board/freescale/mpc8555cds/Kconfig"
-source "board/freescale/mpc8560ads/Kconfig"
 source "board/freescale/mpc8568mds/Kconfig"
 source "board/freescale/mpc8569mds/Kconfig"
 source "board/freescale/mpc8572ds/Kconfig"