odroid: remove CONFIG_DM_I2C_COMPAT config

[platform/kernel/u-boot.git] / arch / powerpc / cpu / mpc8260 / start.S

diff --git a/arch/powerpc/cpu/mpc8260/start.S b/arch/powerpc/cpu/mpc8260/start.S
index d7eaf13..d255bde 100644 (file)
--- a/arch/powerpc/cpu/mpc8260/start.S
+++ b/arch/powerpc/cpu/mpc8260/start.S
@@ -48,9 +48,6 @@
        GOT_ENTRY(__init_end)
        GOT_ENTRY(__bss_end)
        GOT_ENTRY(__bss_start)
-#if defined(CONFIG_HYMOD)
-       GOT_ENTRY(environment)
-#endif
        END_GOT
 
 /*
@@ -139,14 +136,6 @@ _hrcw_table:
 _start:
        mfmsr   r5                      /* save msr contents            */
 
-#if defined(CONFIG_COGENT)
-       /* this is what the cogent EPROM does */
-       li      r0, 0
-       mtmsr   r0
-       isync
-       bl      cogent_init_8260
-#endif /* CONFIG_COGENT */
-
 #if defined(CONFIG_SYS_DEFAULT_IMMR)
        lis     r3, CONFIG_SYS_IMMR@h
        ori     r3, r3, CONFIG_SYS_IMMR@l
@@ -382,57 +371,6 @@ int_return:
        SYNC
        rfi
 
-#if defined(CONFIG_COGENT)
-
-/*
- * This code initialises the MPC8260 processor core
- * (conforms to PowerPC 603e spec)
- */
-
-       .globl  cogent_init_8260
-cogent_init_8260:
-
-       /* Taken from page 14 of CMA282 manual                          */
-       /*--------------------------------------------------------------*/
-
-       lis     r4, (CONFIG_SYS_IMMR+IM_REGBASE)@h
-       lis     r3, CONFIG_SYS_IMMR@h
-       stw     r3, IM_IMMR@l(r4)
-       lwz     r3, IM_IMMR@l(r4)
-       stw     r3, 0(r0)
-       lis     r3, CONFIG_SYS_SYPCR@h
-       ori     r3, r3, CONFIG_SYS_SYPCR@l
-       stw     r3, IM_SYPCR@l(r4)
-       lwz     r3, IM_SYPCR@l(r4)
-       stw     r3, 4(r0)
-       lis     r3, CONFIG_SYS_SCCR@h
-       ori     r3, r3, CONFIG_SYS_SCCR@l
-       stw     r3, IM_SCCR@l(r4)
-       lwz     r3, IM_SCCR@l(r4)
-       stw     r3, 8(r0)
-
-       /* the rest of this was disassembled from the                   */
-       /* EPROM code that came with my CMA282 CPU module               */
-       /*--------------------------------------------------------------*/
-
-       lis     r1, 0x1234
-       ori     r1, r1, 0x5678
-       stw     r1, 0x20(r0)
-       lwz     r1, 0x20(r0)
-       stw     r1, 0x24(r0)
-       lwz     r1, 0x24(r0)
-       lis     r3, 0x0e80
-       ori     r3, r3, 0
-       stw     r1, 4(r3)
-       lwz     r1, 4(r3)
-
-       /* Done!                                                        */
-       /*--------------------------------------------------------------*/
-
-       blr
-
-#endif /* CONFIG_COGENT */
-
 /*
  * This code initialises the MPC8260 processor core
  * (conforms to PowerPC 603e spec)
@@ -459,11 +397,9 @@ init_8260_core:
        /*--------------------------------------------------------------*/
 
        lis     r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
-#if !defined(CONFIG_COGENT)
        lis     r4, CONFIG_SYS_SYPCR@h
        ori     r4, r4, CONFIG_SYS_SYPCR@l
        stw     r4, IM_SYPCR@l(r3)
-#endif /* !CONFIG_COGENT */
 #if defined(CONFIG_WATCHDOG)
        li      r4, 21868               /* = 0x556c */
        sth     r4, IM_SWSR@l(r3)
@@ -878,18 +814,7 @@ clear_bss:
         * Now clear BSS segment
         */
        lwz     r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
-       /*
-        * For HYMOD - the environment is the very last item in flash.
-        * The real .bss stops just before environment starts, so only
-        * clear up to that point.
-        *
-        * taken from mods for FADS board
-        */
-       lwz     r4,GOT(environment)
-#else
        lwz     r4,GOT(__bss_end)
-#endif
 
        cmplw   0, r3, r4
        beq     6f